, Medical Diagnostic Equipment Manufacturer,Supplier and Exporter in India,Medical Diagnostic Equipment Manufacturer

Science Lab Export, A correct diagnosis results in correct treatment. Our diagnostic tools assist you to assist others. Science Lab Export have a good range of diagnostic equipment and products including stethoscopes and sphygmomanometer. Stethoscopes are often considered as a logo of the doctor's profession, as doctors are often seen or depicted with a stethoscope hanging around their neck. Auscultation, used along side monitoring vital sign may be a fundamental diagnostic measure in practice . Other products during this category are Pulse Oximeters, Reflex Hammers/Tuning Forks, Otoscopes, Opthalmoscopes, Thermometers, X-Ray Viewers, Diagnostic Sets and more. Medical Diagnostic Equipment Manufacturers, Suppliers and Exporters in Ambala India, Medical Diagnostic Equipment Manufacturers in Ambala India.

Pulse Oximeter Portable With Accessories

Product Code : SLE/MDE/01

Pulse-oximeter, SpO2 and HR detection, portable, battery powered, with accessories

Portable pulse-oximeter, with SpO2 and HR detection
Suitable for adult, paediatric and neonatal patients

range 0 – 100 %
resolution 1 %
accuracy (in the range 70 – 100 %) ± 2 % adult, ± 3 %

Heart Rate (HR)
range (minimum guaranteed) 25 – 250 bpm
accuracy ± 3 bpm (non-motion) or ± 2 %, whichever is greater
resolution 1 bpm

SpO2 waveform visualisation
Signal quality visualisation
TFT or OLED colour display 2.4 inches, visualising all operating parameters and alarms
Audio-visual alarms, adjustable, and silencing feature for SpO2 and HR
Robust design, suitable for use in demanding environment
Display reports alarms, system errors, sensor failure/disconnection and battery status
Auto power-off function
Rechargeable battery, autonomy > 16 hours of continuous use
Power requirements 220 V / 50 Hz (battery charger)
Power consumption 7.5 W
Suitable to operate with 3 x AA (LR6) 1.5 V commercial disposable batteries
Supplied with battery charger/recharge station.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific lab equipments manufacturers, scientific laboratory equipments manufacturer, technical educational equipment manufacturer, technical lab equipments manufacturers, tvet lab equipment manufacturers, vocational training lab equipments exporter.

Binaural Stethoscope Complete

Product Code : SLE/MDE/02

Binaural Stethoscope Complete:
A mechanical listening device designed for listening to sounds from the heart and lungs. Comprises a membrane at the listening head connected by a split "Y" tube to the headgear with ear pieces that are placed into the users ears.

: stainless steel, or chrome brass
Removable plastic ear-pieces.
Double cup, dual-use (adult and pediatric auscultation) chest piece in stainless steel or chrome plated brass.
Adult diaphragm 43-47mm; pediatric diaphragm 28-36mm.
Y tube treated rubber or PVC with 8-11mm diameter.
Sensitivity 8.1dB in a range from 600 Hz to 1,500Hz for pneumology.
Sensitivity from 3.2dB to 26dB in a range from 50 to 1000Hz for cardiology.

Contact Science Lab for your Educational School Science Lab Equipments. We are best maths lab equipments manufacturers, maths lab kit india, maths lab kit suppliers, maths lab kits manufacturers, metal testing equipments, physics lab educational equipments

Sphygmomanometer Adult Aneroid

Product Code : SLE/MDE/03

Sphygmomanometer Adult Aneroid sphygmomanometer. Measures blood pressure non-invasively by displaying the pressure in a cuff wrapped around a patient’s arm. The systolic and diastolic pressure is usually assessed by listening to Korotkoff sounds generated by arterial blood flow using a stethoscope simultaneously.

Inflation bulb with integrated manometer needle gauge.
Gauge graduated 0-300mmHg (min) in 2 (max) mmHg increments, with pressure release valve.
Composed of cloth containing an inflatable bag connected via a tube to a flexible bulb with valve and integrated manometer needle gauge.
Washable, one-size-fits-all adult-sized cloth cuff with velcro fastening, reinforced at both ends.
The bag is inflated by means of the flexible bulb connected via a tube.
+/- 3mm Hg accuracy
Gauge body to allow recalibration of readings, yet in normal operation be sealed and secure
Tube length 50-80cm.
Universal quick connector can easily be connected to all types of inflation bulbs.
Estimated volume: 0.0136 m3
Operating conditions: 10°C (50°F) to 40°C (104°F) at a relative air humidity of 85 % (non-condensing)
Storage conditions: 5 °C (41°F) to 50 °C (122 °F) at a relative air humidity of 85 % (non-condensing)
Instructions for use: For the measurement of arterial blood pressure.
Estimated weight: 0.494kg.

Contact Science Lab for your Educational School Science Lab Equipments. We are best physics lab equipment supplier, physics lab equipment suppliers in ambala, physics lab equipments manufacturers, physics lab equipments suppliers, physics labware, school educational equipments.

Clinical Thermometer Digital

Product Code : SLE/MDE/04

Clinical thermometer, electronic, digital, glass and mercury free.

Accuracy ± 0.1 °C in the range 35 – 41 °C
Liquid crystal display
Clinical thermometer, electronic and digital
Celsius temperature scale
Glass and mercury free
Temperature measurement range 34 – 42 °C (minimum guaranteed)
Low battery indicator
Water proof, suitable for cleaning and disinfection
Battery powered, batteries included in the supply
Beep audio alert
Automatic switch-off

Contact Science Lab for your Educational School Science Lab Equipments. We are best school lab equipments supplier, school lab export, school lab exporter, school laboratory equipment manufacturers, school laboratory equipment suppliers, school science equipments.

Ultrasound Scanner Mobile w/access

Product Code : SLE/MDE/05

Scanner, ultrasound, mobile, with accessories to be used in health infrastructures for diagnostic imaging applications: general abdomen, obstetrics and gynaecology, small parts, neonatal head and hip, cardio-vascular, urology and intra-operative

Technical specificaions:
High performance ultrasound scanner
System integrates scanner, 2 probes, matching trolley and video-printer
Imaging display modes: B, dual B, M, B and M
Adjustable field-of-view, 6 level zoom
Imaging technologies: dynamic frequency imaging, multi-stage focusing, aperture control
Depth range selection: convex sector image and linear image, 3 steps
Image orientation: lateral and vertical inversion (in B mode)
Freeze function with storage of approx. 25 images
Piezoelectric probes, electronically scanned: convex and linear
Compact and lightweight, easy to transport and position
Alphanumeric keyboard with trackball and time gain control (TCG)
Measurements and analysis:
Calibre control: trackball
B-mode image: distance, area and circumference by ellipse and trace method, volume, ratio, gestational age, foetal weight, angle
Gestational table: user programmable
M-mode: velocity, time interval, depth, heart rate, LV function
Alpha-numerics & graphics:
Text annotations and body markers
High resolution B/W monitor, approx. 25 cm diagonal (across), equals to 10 inch, fit with reflection filter
Image grey scale: 256 levels
Video output: 625 lines/frame
Two transducer ports leave 2 probes permanently available, electronic switch between probes
Data communication interface: RS232, BNC, IEEE, USB or equivalent
Power supply: 220 V / 50 Hz
Automatic display of: date and time, focal point setting, image orientation indicator, image scrolled position, distance scale mark, M-mode time mark, grey scale for calibration.

Contact Science Lab for your Educational School Science Lab Equipments. We are best school science lab equipment suppliers in india, school science lab equipments exporter, school science lab equipments manufacturers,school science lab equipments manufacturer, school science lab equipments supplier, school science lab equipments suppliers.

Stethoscope Foetal Pinard

Product Code : SLE/MDE/06

Science Lab Export Stethoscope foetal Pinard used to auscultate the heart sounds of the embryo in the womb.

One end flat, min 45-60 mm diameter.
Unbreakable plastic or aluminum.
One end with bell, 50-60 mm diameter
Length: 140 - 200 mm

Instructions for use should indicate: For diagnosis and prenatal care of pregnant women to listen to the foetal heart.

Contact Science Lab for your Educational School Science Lab Equipments. We are best school science lab equipments suppliers in india, school science lab instruments, school science lab instruments exporter, school science lab instruments manufacturer, school scientific equipments, science educational equipment.

Ophthalmoscope Set

Product Code : SLE/MDE/07

Ophthalmoscope Set to visualize the interior of the eye, with the instrument relatively close to the subject's eye and the observer viewing an upright magnified image. Ophthalmoscope set composed of diagnostic head threaded on a handle.

Light intensity: 8,000-12,000 lux
Dust free sealed optics and aspherical optical system
Red-free, blue, green, and polarization filters.
Set contained in a hard storage case.
Handle with on/off switch.
Anti-reflection lens.
Range of lenses not smaller than -20D to +20D with steps not greater than 1D.
Magnification 12-16x
Scratchproof lens; glass (preferred) or plastic
Capable of operating continuously in ambient temperature of 10 to 40 deg C and relative humidity of 15 to 90%.
Batteries: AA or rechargeable
Battery life: at least 5 hours of use on full charge or fresh batteries
Capable of being stored continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90%.
Liquid splash resistant
Weight: < 0.20kg without batteries
Supplied without batteries
Apertures: small, large and semi circle, fixation star.
Color temperature: Cool white in the range 3100-5500K

Contact Science Lab for your Educational School Science Lab Equipments. We are best science educational equipments, science educational instruments, science lab equipments manufacturer, science laboratory instruments exporter, scientific educational equipments, scientific educational lab equipment.

Otoscope Set

Product Code : SLE/MDE/08

Otoscope Set for visual examination of the eardrum and the outer ear, Otoscope set composed of diagnostic head on a handle.

Port for an insufflation bulb
Set contained in a hard storage case.
Viewing lens magnification 2.5-3x
Color temperature: Cool white in the range 3100-5500K
Cleanable with alcohol wipes
Handle with on/off switch.
Light intensity: 8,000-12,000 lux
Specula specifications
Scratch-resistant lens; glass (preferred) or plastic
Liquid splash resistant
Weight: < 0.170kg without batteries

Battery life: at least 3 hours of use on full charge or fresh batteries
Standard AA or AAA or rechargeable
Supplied without batteries (as applicable to AA/AAA type only)
Low battery or charge status indicator (as applicable to rechargeable type only)

Instructions for use:
Batteries should be ordered separately.
Examination of inner ear, canal and tympanic membrane.
Safety Process: Specula must be thoroughly cleaned and disinfected after each use to prevent cross contamination.

Capable of operating continuously in ambient temperature of 10 to 40 deg C and relative humidity of 15 to 90%.
Capable of being stored continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90%.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific laboratory equipments manufacturer, scientific laboratory equipments supplier, technical educational equipment exporter, technical educational equipment manufacturer, technical educational equipment supplier, technical educational equipments exporter.

Flashlight Pre-focused

Product Code : SLE/MDE/09

Length: < 185mm
Mechanical switch
Plastic or metal housing
Sealed with o-ring
Diameter: < 40mm
Supplied without batteries
Batteries: AA or AAA
Battery life: at least 3 hours

Safety process:
This item must be cleaned and disinfected after each use.

Instruction for use:
For providing additional lightning during diagnosis examinations.

Contact Science Lab for your Educational School Science Lab Equipments. We are best engineering educational equipments, high school science lab equipment manufacturers, lab equipment exporters, lab equipments manufactruers, lab instruments manufactruers, mathematics lab equipments manufacturers.


Disposable Wooden Tongue Depressor

Product Code : SLE/MDE/10

Wooden tongue depressor, with rounded extremities.
Single use.
Thickness: Approximately 1.6mm
Non sterile.
Size: approx. Size: 17 x 149mm

Conditions for stock:
Store in a clean and safe environment: avoid dust, and other environmental risk of damage.

Instructions for use:
Item used for depressing the tongue during examination of the patient's mouth and the throat.

Safety process:
This item is for single use only.
Break the depressor tongue immediately after use to prevent re-use (risk of cross contamination).

Contact Science Lab for your Educational School Science Lab Equipments. We are best anatomy model manufacturer, biology lab equipment manufacturer, biology lab instruments exporter, biology lab instruments manufacturer, biology lab instruments supplier, burette pinchclip medium wall india.

Tape Measure Fibreglass Tailors

Product Code : SLE/MDE/11

Science Lab Export Tape measure, vinyl-coated, 1.5m

Technical Specifications:
Tape measure, vinyl-coated fibreglass,with metal tip at both ends, graduated in centimetres.

Width: minimum 1.3cm
Length: 1.5m
Thickness: minimum 0.36mm

Contact Science Lab for your Educational School Science Lab Equipments. We are best educational lab equipment exporter, educational lab equipment manufacturer, educational lab equipment manufacturers in india, educational lab equipment supplier, educational lab equipments, educational lab equipments export.

CTG Monitor With Accessories

Product Code : SLE/MDE/12

Cardiotocograph (CTG monitor), normal and twins Foetal Heart Rate (FHR) and Uterine Contraction (UC) detection, tabletop, AC and battery powered, with loudspeaker, event marker, printer and accessories

External cardiotocograph (CTG), foetal heart rate (FHR) and uterine contraction (UC)
Ultrasound FHR and pressure-sensitive UC continuous detection
Automatic transducer detection and dedicated slots for different transducers
Tabletop device
Automatic Foetal Movement (AFM) feature
2 FHR and 1 UC channels
Equipped with wired remote switch for event marking
Integrated loudspeaker and volume level adjustment
Selectable audio channel (FHR1 or FHR2)
Twins detection and FHR, with separate visualisation of the two signals

FHR specifications:
ultrasound output power < 10 mW/cm2
resolution 1 bpm
ultrasound doppler detection with automatic correlation, 2 channels
ultrasound frequency range 1 – 2 MHz ± 10 % (depending on the available model)
accuracy ± 2 bpm
measurement range 40 – 240 bpm

accuracy ± 10 %
external pressure-sensitive detection
resolution 1 unit
automatic and manual zero function
measurement range 0 – 100 units

FHR1, FHR2 and UC value and waveform visualisation and printing

Integrated thermal printer:
printing area 110 – 112 mm wide
adjustable paper speed 1, 2 and 3 cm/min
Z-folded thermal paper supply
graduated paper with separate print areas and scales for FHR1, FHR2 and UC
continuous printing, real-time and manual print features

Patient information input and exam storage capabilities
Data/network connection interface
Display, LCD 5.6 inches, and control panel visualising all working parameters, signals (signal quality, audio settings, FHR1, FHR2, UC, FM) with waveform, alarms, power supply / battery status and system messages
Internal data storage
Automatic self-test
Power consumption 50 W
Audio/visual alarms for FHR1 and FHR2 (low/high, adjustable thresholds, with silencing feature), loss of signal, battery and power supply status, paper/printer and system errors
Battery autonomy > 2 h
Power requirements 110 – 220 V / 50 – 60 Hz
Compact design, suitable for cleaning with hospital-grade detergents
Battery and AC powered, with automatic switch between modes and automatic recharge when connected to mains
Integrated battery charger

Contact Science Lab for your Educational School Science Lab Equipments. We are best educational lab instruments, educational lab instruments exporter, educational lab instruments manufacturer, educational lab instruments supplier, educational laboratory equipment manufacturers, educational laboratory glassware exporter.

Portable ECG Recorder w/access

Product Code : SLE/MDE/13

Electrocardiogram (ECG) digital monitor and recorder, 12-leads detection, multi-channel recording, portable, AC and battery powered, with printer and accessories

ECG analysis and full interpretation (rhythm and events), real-time and manual
ECG diagnostic monitor and recorder, with printer
3- or 6-channels recording, depending on the available model

ECG features:
Common Mode Rejection Ratio (CMRR) > 89 dB
frequency response (minimum guaranteed) 0.05 – 150 Hz
accuracy of input signal reproduction ± 5 % 
12 standard derivations aVR, aVL, aVF, I, II, III and V1 – V6
simultaneous 12-leads acquisition
adjustable ECG acquisition and visualisation modes
ECG gain 2.5, 5, 10, 20 mm/mV and Auto, accuracy ± 5 %
Adjustable ECG sweep (trace speed in mm/s)
HR range 30 – 300 bpm with rhythm analysis
calibration signal 1 mV ± 5 %
input impedance > 2.5 MOhm or > 50 MOhm, depending on the available model
pacemaker rhythm detection
auto-zero feature
selectable/adjustable filters: baseline correction and Baseline Drift Removal (BDR); AC (mains frequency suppression); Muscle Artefact (EMG)
defibrillation and AC fluctuation protection, baseline recovery < 5 s after defibrillation
internal noise level < 15 microV (p-p)
current leakage to the patient < 10 microA

Built-in printer:
paper speed (minimum guaranteed) 5, 12.5, 25 and 50 mm/s, accuracy ± 5 %
compatible with roll and Z-folded paper (80 mm 3-channel, 110 mm 6-channel)
thermal printing head
automatic and manual print (selectable modes, ECG traces and reports)
3 or 6 channel recording, depending on the available model

Integrated keyboard
Display, backlit colour TFT LCD, 5 – 8 inch diagonal depending on the available model
Visualisation of ECG channels, patient data, date/time, settings, analysis/interpretation, battery status, system messages and alarms
Patient data input
Internal storage for patient data, exams, analysis, interpretations and settings
Data and report export feature
Data/USB and network interface
Adjustable visualisation settings, with selectable ECG channels and parameters
Audio/visual alarms for patient connection, paper and printer errors, mains/battery power supply and system errors
Continuous check of electrodes connection and audio/visual alarm on loss of signal
Automatic switch to battery in case of power failure, automatic recharge on connection to mains
Power requirements 110 – 220 V / 50 – 60 Hz
Power consumption 80 W
Automatic self-test and continuous system monitoring
Built-in rechargeable battery, autonomy > 2.5 hours or 800 exams whichever higher.

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational instruments supplier, technical institute lab equipments, technical lab equipments manufacturers, top lab equipments manufacturers, tvet lab equipment manufactruers, vocational training lab equipments exporter, vocational training lab equipments manufacturers

FHR Doppler Detector With Accessories

Product Code : SLE/MDE/14

Foetal Heart Rate (FHR) doppler detector, with speaker, handheld, battery powered, with accessories.

Ultrasonic continuous doppler operating mode
External transducer, connected to the main unit through a coiled wire cable
Foetal Heart Rate (FHR) ultrasound detector, single transducer
Handheld lightweight detector
Integrated transducer holed on the body of the main unit
Ultrasound frequency 2 MHz ± 10 %
Sensitivity 90 dB
Integrated loudspeaker and volume level adjustment
LCD display, backlighted, with FHR, pulse, frequency, volume, battery and system status
Audio/visual alarms for high/low FHR, battery status and system errors
Automatic self-test
Ultrasonic power output < 10 mW or < 18 mW, depending on the available model
FHR range 50 – 210 bpm ± 2 bpm, resolution 1 bpm
Automatic power-off
Battery autonomy > 5 h or 600 exams, whichever higher
Power requirements 1.5 V AA (LR6) commercial disposable batteries or 1.2 V Ni-MH commercial rechargeable batteries (not included), 2 or 3 units depending on the available model
Power consumption 0.5 W
Noise suppression feature
Integrated headset connector

Contact Science Lab for your Educational School Science Lab Equipments. We are best educational lab equipments exporter, educational lab equipments manufacturers, educational lab equipments supplier, educational lab equipments suppliers, educational lab export, educational lab exporter.

Handheld Pulse Oximeter Incl. Respiratory

Product Code : SLE/MDE/15

Handheld, portable, battery powered pulse oximeter, displaying patientoxygen saturation (SpO2), pulse rate and respiratory rate in real time.

SpO2 resolution: 1 %.
SpO2, pulse rate and respiratory rate monitor, for children, neonates and adults.
Pulse Rate detection includes the range: 30 - 240 bpm.
SpO2 detection includes the range: 70 - 100 %.
SpO2 accuracy (in the range at least 70 - 100%): within ± 2% in ideal conditions in adults, and within ± 3% for all patients and perfusion / movement conditions.
Respiratory rate includes the range 5 to 80 rpm.
Pulse Rate resolution: 1 bpm.
Pulse Rate accuracy within ± 3 bpm in ideal conditions.
Respiratory rate accuracy within ± 2 rpm in ideal conditions
Respiratory rate resolution: 1 rpm

Display indicates high and normal respiratory rate count for inputted age.
Patient age group input feature.
Data display refresh rate ≤ 5 s
Display with main parameters: %SpO2, pulse rate, respiratory rate, signal quality, status messages, battery state indication.
Display indicates when SpO2 < 90% (hypoxaemia per WHO guidelines.)

Design enables use in demanding environments, e.g. shock, vibration
Suitable for detection in low perfusion conditions down to perfusion index of 0.1%.
Automatic correction for movement and ambient light artefacts
Audible and visual alarms for sensor error or disconnected, system errors, low battery.

Enclosure protection.
Overall device and probe weight < 300 g.
Case and probe suitable for cleaning and disinfection with hospital-grade cleaning products.

Protection against defibrillator discharges.
Suitable for operation by battery and by mains power supply, if connected and/or recharging.
Operated by rechargeable, non-replaceable Li-ion battery, power supply
External AC battery charger, plug style and voltage as per local supply.
Automatic switch between battery and mains powered modes, when recharging or in mains power failure.
Automatic power-off after period of no use.
The display shows which power source is in use.
Running time on battery only ≥ 20 hours.

Storage conditions: 0 to 50 deg C, 10 to 95% relative humiditynon-condensing
Operarting conditions: 5 to 40 deg C, 10 to 90 % relative humiditynon-condensing

Contact Science Lab for your Educational School Science Lab Equipments. We are best educational laboratory instrument suppliers, educational laboratory instruments exporters, educational laboratory microscopes, educational laboratory suppliers, educational physics lab equipments, educational science equipments.

Non Contact Clinical Thermometer

Product Code : SLE/MDE/16

Infrared (IR) clinical thermometer, digital, handheld, minimmal range 34– 42 °C.

Infrared (IR) non-contact clinical thermometer
Factory calibrated and pre-set emissivity for all skin types
Measuring distance between 3 – 12 cm / 1.22 – 6 inch, depending on the model
Measurement of skin temperature trough thermal radiation detection

Digital display located at the proximal end (user side)
Handheld design with ergonomic pistol type grip or similar design.
Handgrip with index finger or thumb switch to trigger measurements
IR sensor located at the distal end (patient side)

Visual or audio alert on switch-on, ready-to-use and measurement completed.
Water spill proof and suitable to be cleaned and disinfected
Preferably backlit LCD display, suitable for reading in bright sunlight
Display visualisation of measured temperature, battery status ,operational status, errors including incorrect reading
Digital read-out, user-selectable, in Celsius or Fahrenheit scale
Graduation 0.1 °C / 0.3 °F
Accuracy 0.3 °C (minimum guaranteed)
Automatic switch-off when not in use
Low and high temperature visual or audiable alarms
Internal memory (the presence of this feature depends on the available model), to retain several readings
Battery powered, 2 x 1.5 V AA or AAA commercial batteries depending on the model..
Temperature measurement range 34 – 42 °C / 93 – 108 °F
Hold function, to keep the latest measurement visualised on the display

Contact Science Lab for your Educational School Science Lab Equipments. We are best geography lab equipments manufacturers, geography lab equipments suppliers, geography lab models suppliers, high school biology lab equipment india, high school biology lab equipment manufacturers, high school chemistry lab equipment manufacturers.

Spot Check Pulse Oximeter With Accessories

Product Code : SLE/MDE/17

Robust shock resistant design allow use in demanding environments
Suitable for professional clinical use, all patient categories neonate, infant, adult
Ultra-compact pulse oximeter integrated into finger/toe clip
Accommodates finger/toe thicknesses 8 to 25mm directly or through the use of a separate sensor which can be connected to the device.
Spot-check of arterial blood oxygen saturation (SpO2) and heart rate(HR)

Measuring ranges:
SpO2 accuracy within: +/-3%
Pulse rate detection: 30 to 240 bpm
Pulse rate resolution: 1 bpm)
SpO2 detection within the range of: 70 to 99%
Pulse rate accuracy: within: +/-3%
Display shows SpO2, pulse rate, signal strength, sensor error or disconnect and low battery.
SpO2 resolution: 1% or less
Enclosure protection or better
Suitable for cleaning and disinfection with hospital-grade cleaning products.v
Batteries must allow at least 2500 spot-checks, calculated at 30 seconds per spot-check, or at least 21 hours of operation.
The unit is equipped with an automatic power off feature.
Power requirements two 1.5V AAA batteries

Pulse oximeter must be used and maintained properly according manufacturer's instructions.
For spot-check of percentage arterial oxygen saturation (SpO2, %) and pulse rate (HR, bpm) of all patient categories. Non-invasive monitor using a clip-on sensor placed on a finger or toe. The spot-check pulse oximeter is ultra-compact and fits easily pocket or carry-on bag.

Storage conditions temperature: -20 °C to 60°C / RH: 10% - 95%
Operating conditions temperature: 5 to 40°C / RH: 30 to 80%

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational equipments manufacturers, technical educational equipments manufacturer, technical educational equipments supplier, technical educational instruments, technical educational instruments exporter, technical educational instruments manufacturer, vocational training lab instruments exporter

Request A Catalog

Request A Catalog

Request Now for a Catalog and Get best deals for your Products

Request Now