Laboratory is the hub for bench equipment and practical lists, with sub-ranges for heating, sterilising, weighing, separating, mixing, supporting and clinical work, plus a general store and physics, chemistry and biology lists. School, college, university, testing and clinical laboratories start here to find the right sub-range for a job. The heating mantles, hot plates, stand metalware, bossheads, retort clamps and most burners are made by ScienceLab in Ambala. The centrifuges and water baths are supplied by ScienceLab, Ambala, and the other sub-ranges mix made and supplied items.
| Group | What it covers | Example products |
|---|---|---|
| Heating | Gas and spirit burners, hot plates, heating mantles for round-bottom flasks and water baths, from simple round baths to digital and ultrasonic models. | Bunsen Burners, Heating Mantle, Serological Water Bath |
| Sterilising and fume control | Electric and gas autoclaves, stainless steel models including a 15 litre unit, ductless and ducted fume cupboards and a class 2 biosafety cabinet. | Electric Autoclave, Fume Cupboard, Ductless, Biosafety Cabinet Class 2 |
| Weighing and measuring | Beam, physical and analytical balances with mass sets, glass and polypropylene measuring cylinders, and analysers such as a photo colorimeter and a UV-VIS spectrophotometer. | Physical Balance, Balance, Analytical, Glass Measuring Cylinder |
| Separating and mixing | Hand, clinical, micro and high-speed centrifuges, magnetic stirrers with and without heating, and a vortex mixer for tubes. | Hand Centrifuge, Centrifuge, Clinical, Vortex Mixer |
| Supports and clamps | Stand bases, rods, H-frames and tripods, fixed, cross and swivel bossheads, and prong, cork and rubber jaw retort clamps. | Stand bases 18/10 Stainless Steel, Bosshead Cross Type 18/10 Stainless Steel, Retort Clamp, Cork Jaws |
| Clinical laboratory | Blood collection tubes, pipettors and tips, counting chambers, staining racks, and ELISA and clinical chemistry analysers for hospital labs and medical laboratory courses. | EDTA Vacuum Tube, Counting Chamber Neubauer, ELISA Reader 8 Channel |
| Practical lists and general store | A general store of glassware, chemicals and teaching aids, and separate physics, chemistry and biology practical lists for school and college rooms. | Meter Bridge, Senior Secondary Microscale Chemistry Kit, Ganong's Potometer |
Start from the job, not the product name. Heating splits four ways: an open flame from Burners, an even surface from Hot Plates, a round-bottom flask in a Heating Mantle, or a steady low temperature in a Water Bath. Weighing, centrifuging, stirring and sterilising each have a sub-range of their own.
A set-up on a retort stand draws on three sub-ranges at once: a base and rod from Stand bases, Rods and Rings, a Bosshead and a Retort Clamp. Check that the bosshead fits the rod diameter before the parts are listed together.
When a whole practical room is being equipped, begin with the subject list instead: Physics Lab, Chemistry Lab or Biology Lab. Use Laboratory Equipment for anything the lists do not hold, and Clinical Laboratory for medical laboratory training.
Gas burners need a gas point or an LPG supply. Hot plates, mantles, water baths, stirrers, centrifuges, electric autoclaves and instruments need sockets within reach of the bench, so no lead crosses a walkway. Water baths and wash-up areas need water and a drain, and a ducted fume cupboard needs an outlet. Check each item's rating on its own page.
Fume cupboards, the biosafety cabinet and the larger autoclaves need planned space and clearance, so check each footprint on its page before the room is laid out. Analytical balances need a firm, draught-free spot, and the balances sub-range lists an anti-vibration table for them. Burners, hot plates, small baths and stirrers can be shared between benches.
Begin with the practicals and the number of students working at once. Every bench needs supports from the stand, bosshead and clamp sub-ranges and a heat source, and most need a balance within reach. Then add the subject practical list for the room, and leave instruments such as spectrophotometers until the courses that use them are running.
Keep one log for each item with its check list and dates. Look at cables, plugs, lids and seals on the electrical and pressure items, check balances with a known mass, and mark each item with the date of its last check. Take any faulty item out of use until it is repaired, and keep spares such as burner tubing and stirrer bars in stock.
Stand while heating, tie back hair and loose clothing near flames, and wear eye protection from start to finish. Keep bags and coats off the benches and floor. Never leave a burner or hot plate unattended, and remember a plate stays hot after it is switched off. Report breakages at once, and cool a burn under plenty of running water.
Bench orders from this hub often cross sub-ranges, for instance a Centrifuge, Clinical for clinical work and a Retort Clamp Standard 18/10 Stainless Steel for the stand beside it. Jain Scientific Equipments Pvt Ltd handles such combined lists in Ambala under the ScienceLab name, and its laboratory equipment goes to buyers in 110 countries. See the ScienceLab company profile.
To request a quotation or a catalogue for this range, send the product names, codes and quantities through our contact page or add the items to your enquiry cart.
Last updated: 19 November 2026