Lab Glassware in the educational range sets out the everyday apparatus of a school science room by the practical it serves: measuring liquids, mixing and warming, titration, filtration, reagent storage and gas collection. Middle and secondary school teachers and lab assistants use it to give every student group a complete bench set, from first volume lessons to senior titrations. The borosilicate glassware and the plastic items for junior classes linked here are made by ScienceLab in Ambala.
| Group | What it covers | Example products |
|---|---|---|
| Measuring liquids | A graduated borosilicate cylinder for measuring liquids and learning to read the meniscus at eye level. | Glass Measuring Cylinder |
| Mixing, dissolving and warming | Five borosilicate beakers of different sizes, an Erlenmeyer flask that swirls without splashing, and a heat-resistant glass rod for stirring. | Glass Beaker Set of 5, Conical Flask, Stirring Rod, Glass |
| Titration | A Class B borosilicate burette with a PTFE key stopcock, held upright on a stand rod by a die-cast clamp with rubber-gripped jaws. | Burette, Class-B, with PTFE Key Stopcock, Burette Clamp, Die Cast – Single Clamp |
| Filtration | Short-stem borosilicate funnels for folded filter paper, and a double stand on a polished wood base that holds two funnels over their receivers. | Glass Funnel, Funnel Stand, Double |
| Reagents and indicators | Clear narrow-mouth bottles with a pressed flat stopper for stock solutions, and pipette dropping bottles with a vinyl teat for indicators at each station. | Reagent Bottle, Narrow Mouth, Dropper Bottle, Clear |
| Gas collection | A heavy-footed glass gas jar with a ground flange, a cover of sheet glass ground on one side, and clear glass delivery tubes, two straight and two bent. | Gas Jar, Glass, Gas Jar Cover, Delivery Tube |
| First practicals for junior classes | Spouted polypropylene beakers and an unbreakable polypropylene cylinder for measuring and pouring lessons in which nothing is heated. | Plastic Beaker Set of 5, Measuring Cylinder, Polypropylene |
Plan by student group rather than by student. List the practicals for the term, note what one bench needs for each, and multiply by the number of groups in the biggest class. Then add spares of the small or thin pieces that are easily broken or lost, such as beakers, delivery tubes, gas jar covers and dropper bottles, so a practical never stops for one missing item.
Match each item to the class. Junior groups can start with the plastic beaker set and the polypropylene cylinder for unheated work. Students who warm liquids over a burner move on to the glass beaker set and the conical flask, standing on wire gauze over a tripod. The Class B burette belongs to senior-secondary titrations, once students can read a scale closely and handle a stopcock.
Teach handling before the first practical. Students carry glassware with both hands, never in a stack, and move a hot vessel only with tongs. Check rims, spouts and bases for chips and star cracks before anything is heated. After the lesson, wash each item, rinse it with distilled water and let it drain upside down, then put it back with its practical so the next class finds a full set.
Borosilicate glass expands very little when heated, so it copes with a burner flame and with hot liquids far better than ordinary soda-lime glass. The glass beakers, conical flask, glass cylinder, funnel, burette and gas jar here are all stated as borosilicate, while the polypropylene beakers and cylinder stay off the burner. Sudden changes can still crack glass, so never pour cold water into a hot vessel.
Check it at the start of each term and again as items come back from a practical. Look for chipped rims and spouts, star cracks in the base, worn graduations and burette keys that stick or leak. Take damaged pieces out of use at once, because a small chip or crack can split when the glass is next heated.
Most schools build up to it. Younger classes learn measuring and pouring with polypropylene beakers and cylinders, then move to glass once they can carry, pour and wash apparatus safely. Glass is needed from the first practical in which a liquid is heated over a burner, and burettes usually follow in the senior titration practicals.
No. Borosilicate laboratory glass melts at a higher temperature than bottle and jar glass, so a few pieces can spoil a whole load of ordinary glass recycling. Collect broken laboratory glass in a lined, labelled broken-glass box kept apart from other waste, seal the box when it is full, and dispose of it as the school's waste rules direct.
Read the top of the meniscus instead of the bottom, because the bottom cannot be seen through a deeply coloured solution. Keep your eye level with the liquid surface to avoid parallax, and take the start and end readings at the same point of the meniscus, so the titre still comes out right.
No. Every scale has a limit to how finely it can be read, so each reading carries some uncertainty even when it is taken correctly. That is measurement error, not a mistake. Mistakes are things such as reading from above the meniscus, leaving an air bubble in the burette jet or writing down the wrong value, and a repeat reading shows them up.
ScienceLab supplies these school glassware pieces singly as replacements or as matched sets for each bench, and heating practicals often add a Bunsen Burner and Wire Gauze in the same enquiry. Behind the ScienceLab name is Jain Scientific Equipments Pvt Ltd of Ambala, whose school glassware goes to science departments and dealers in 110 countries. See the ScienceLab company profile.
To request a quotation or a catalogue for this range, send the product names, codes and quantities through our contact page or add the items to your enquiry cart.
Last updated: 16 November 2026