Agar Block is a 500 gm pack of agar, the seaweed-derived gelling agent that sets culture media, diffusion blocks and plain gels in biology and microbiology practicals. It is listed as analytical reagent grade and comes with an MSDS. Agar is a gelling agent only, so nutrients must be added before it will grow microbes.
| Parameter | Detail |
|---|---|
| Product | Agar Block |
| Material | Agar, a seaweed-derived gelling agent |
| Pack size | 500 gm |
| Grade (as listed) | Analytical reagent |
| Documentation | Supplied with MSDS |
| Product code | SCL360/081 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Supplied by | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Preparing a gel. Weigh the agar, sprinkle it into distilled water in a flat bottom flask while stirring, and heat it on a hot plate until the liquid turns completely clear. Let it cool until the flask can be held, then pour it into glass petri dishes and leave them undisturbed to set. For culture plates, add the nutrients the practical names before heating, and sterilise the flask of medium and the dishes, for example in an autoclave, before the plates are poured.
Diffusion cubes. Make the gel with a few drops of phenolphthalein and a little sodium hydroxide so that it sets pink. Cut cubes of three sizes with a scalpel, drop each into dilute hydrochloric acid, and use a digital stopwatch to time how long each cube takes to turn colourless right through.
Growth substances from shoot tips. Cut the tips from young oat or maize coleoptiles and stand them on small agar blocks for a few hours. A block set on one side of a coleoptile whose tip has been removed makes the shoot bend away from that side, showing that a growth substance passed from the tip into the agar.
Keep the pack tightly closed in a cool, dry place, because agar draws moisture from the air. Read the MSDS before first use. Molten agar holds its heat for a long time, so lift the hot flask with a cloth or heat-resistant gloves and pour slowly, away from your body.
Usually the agar never fully dissolved. It needs boiling with steady stirring until the liquid is completely clear, and a cloudy mixture sets soft or not at all. Too little agar for the volume of water, or long heating with an acid in the mix, also gives a weak gel. Weigh carefully and keep stirring while it heats.
Very hot agar steams heavily, and the water condenses on the lid and drips back onto the gel. Pour once the flask can be held, keep the lids on while the plates set, and then store them upside down so that any drops collect on the lid instead of the surface.
Pour enough to cover the base in an even layer a few millimetres deep, tilting the dish gently to spread it. A very thin layer dries out and cracks during incubation, while a thick one wastes agar and takes longer to set. Pour every plate of a practical to the same depth.
Acid enters each cube through its surface, and a small cube has more surface for its volume and a shorter path to the centre. Work out surface area divided by volume for each size: the ratio rises as cubes get smaller. This is why large organisms need exchange surfaces and transport systems.
Uneven cutting is the main error, so measure each cube and trim it square. Use agar from one batch so the indicator strength is the same, keep the acid volume, concentration and temperature constant, and agree in advance what counts as colourless. Repeat each size and work out a mean time.
No. Agar only sets the medium into a gel and provides almost no food for microbes. For culture plates, dissolve the nutrients named in your practical with the agar before pouring. Plain agar gels are used for diffusion work and plant growth experiments.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 15 November 2026