- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Last updated: 22 October 2026
Quick Answer
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, lists 405 items of engineering lab equipment in India for engineering colleges, polytechnics, ITIs and technical training institutes, arranged in 12 sub-ranges from fluid mechanics, thermodynamics and materials testing to structures, theory of machines, automotive, civil, aerodynamics, power and control engineering, polymer testing and workshop machine tools. 330 of the items are manufactured by ScienceLab at its factory at Saha, Ambala, and 75 are supplied by ScienceLab. Each sub-range has its own page, linked in the tables below and in the sub-range list under this description, and every item has its own product page. The company supplies buyers in India and in 110 countries.
Quick links: Request a quotation · Jump to the sub-ranges · Open your enquiry cart
Explore the Engineering Lab Equipment Range
| Range | Items | What it covers |
|---|---|---|
| Testing Equipments | 8 | Polymer and film testing machines: a melt flow index tester, computerised tensile and Izod impact testers, a motorised notch cutter, VSP and HDT apparatus, friction and inclined-plane testers and a heat sealer. |
| Fluid Mechanics | 48 | Hydrostatics and pressure benches, Bernoulli, venturi and pipe-friction apparatus, flumes and hydraulic structures, water hammer, pump test rigs, and Pelton, Francis and axial-flow turbines. |
| Materials Testing and Properties | 36 | Tensile, impact, hardness, creep and fatigue testing machines, metallography equipment, a muffle furnace, strain-gauge trainers and teaching kits on springs, stiffness, thin and thick cylinders and fracture. |
| Automotive Training Equipment | 49 | Engine test benches, cut-section engines, fuel injection and engine management trainers, fault diagnosis simulators, power trains, transmissions, brakes and electric vehicle trainers. |
| Theory of Machines | 29 | Governors, cams, gear trains, four-bar chains, balancing, gyroscopes, vibration and bearing apparatus. |
| General Products | 24 | Structures and statics apparatus for bending moments, beams and cantilevers, portal frames, arches, suspension bridges, trusses, strut buckling and torsion, and the Structures Platform on which the modular experiments are assembled. |
| Civil Engineering Lab Equipment | 125 | Concrete, cement, soil, bitumen and aggregate testing apparatus, from cube moulds, slump and Vicat apparatus to compression and flexure testing machines, CBR, shear and abrasion testers. |
| Workshop Machine Tools | 13 | CNC and conventional lathe, milling, drilling and boring machines, tool and cutter grinding, power and hydraulic presses, a hand-operated block making machine and arc, MIG and spot welding machines. |
| Aerodynamics Lab Equipment | 9 | Subsonic, flow visualisation and flight demonstration wind tunnels, a modular air flow bench, Schlieren apparatus, Laval nozzle and jet-flow apparatus and a two-channel recorder. |
| Power & Energy Systems Trainers | 17 | Protection relays, a modular power system and power-system simulator, distribution and circuit breaker trainers, a three-phase mobile transformer, converters, load banks, solar collectors and photovoltaic cells. |
| Control & Process Engineering Trainers | 12 | Ball and beam, ball and hoop, coupled-tank, coupled-drive, servo, engine speed and thermal control trainers, PLC and process trainers, a PID controller and a digital interface. |
| Thermodynamics & Heat Transfer Lab Equipment | 35 | Heat exchangers, conduction, convection, radiation and boiling apparatus, refrigeration, ice plant and air conditioning trainers, compressor and blower test sets, a cooling tower, a Marcet boiler and gas law apparatus. |
| Total | 405 | All items listed in the Engineering Lab Equipment range and its sub-ranges |
Engineering Lab Equipment Specifications
Key specifications below are taken from each product's own page; open a product for its full specifications and product code.
Testing Equipments (8)
| Product | Key specification |
|---|---|
| Computerised Tensile Tester | Load capacity: Up to 500 kg; Cross travel: Up to 1000 mm; Test speed: Variable, 10 mm/minute to 500 mm/minute |
| Inclined Plane Tester | Speed (plane tilt): 1.5° to 2.0° per second; Sled weight: 750 g; Sled size: 4 inch × 2 inch |
| Melt Flow Index Tester | Temperature (as listed): Ambient: 400 °C; Resolution: 0.1 °C; Accuracy: ± 0.1 °C |
| Motorized Notch Cutter (Variable Speed) | Cutting angle: 45°; Range: 0–25 mm; Least count: 0.01 mm |
| Static and Kinetic Friction Tester | Capacity: Up to 9.999 kg; Test speed: 150 mm/minute; Sled weight: 200 g |
A further 3 items in this sub-range are listed on the Testing Equipments page.
Fluid Mechanics (48)
| Product | Key specification |
|---|---|
| Bernoulli's Theorem Demonstration module | Narrowing angle, downstream: 21°; Narrowing angle, upstream: 10°; Manometer range: 0 to 300 mm of water |
| Dead Weight Pressure Gauge Calibrator | Pressure range: 20 kN/m² to 200 kN/m²; Calibration accuracy: Better than 0.025% of reading (deadweight method) |
| Demonstration Pelton Turbine | Output: 5 W at 500 min-1, approx. 30 L/min, H = 2 m; Pelton wheel: 14 blades; Blade width: 33.5 mm |
| Orifice and Venturi meter demonstrator | Variable area meter range: 2 to 30 l/min; Manometer: 8 tubes, 0 to 500 mm water column, pressurised with a hand pump |
| Pipe Surge and Water Hammer Apparatus | Test pipes: Stainless steel, 20.2 mm inside diameter; Test pipe length: 3 m; Head tank: PVC, 45 litre capacity |
A further 43 items in this sub-range are listed on the Fluid Mechanics page.
Materials Testing and Properties (36)
| Product | Key specification |
|---|---|
| Brinell Hardness Tester | Measuring range: 8–650 HBW; Load dwell time: 2 to 99 s, can be set and stored; Reading: Direct digital reading |
| Electronic Spring Tension Machine | Maximum test force options: 10 kN, 20 kN, 30 kN, 50 kN, 100 kN, 200 kN, 300 kN; Test accuracy: Class 1 |
| Impact Testing Machine-Digital | Display resolution: 0.5 J; Minimum scale graduation: 2 J; Pendulum drop angle: Charpy 140°; Izod 90° |
| Tensile strength testing machine | Load range: 250 kg; Load least count: 0.1 kg, digital display; Elongation: Up to 900 mm |
| Youngs Modulus Apparatus | Scale: Engraved brass scale plate, 0 to 30 mm; Vernier: Movable vernier, readable to 0.1 mm |
A further 31 items in this sub-range are listed on the Materials Testing and Properties page.
Automotive Training Equipment (49)
| Product | Key specification |
|---|---|
| Automotive Power Train Training Equipment DOHC Gasoline | Engine: DOHC engine assembly, 4 cylinders (educational model for 1,800~2,000cc gasoline engine); Drive motor: AC 220 V / 180 W |
| Clutch Structure Trainer Hydraulics | Weight: Approx. 20 kg; Size: Approx. 400 × 300 × 300 mm; Composition: Clutch pressing board, clutch pedal, clutch cylinder |
| Diesel Fuel Injection System VE pump | Weight: Approx. 100 kg; Size: Approx. 600 × 400 × 1,200 mm; Injection pump: VE pump |
| Exhaust Gas Calorimeter | Heat exchange area, exhaust gas side: 0.944 m²; Heat exchange area, water side: 0.141 m²; Exhaust gas temperature: 2 × 0–600 °C |
| Four Stroke Four Cylinder Petrol Engine Test Bench | Capacity: 1086 cc; Bore × stroke: 66 mm × 77 mm; Maximum power: 63 BHP at 5500 rpm |
A further 44 items in this sub-range are listed on the Automotive Training Equipment page.
Theory of Machines (29)
| Product | Key specification |
|---|---|
| Coriolis Component of Acceleration Apparatus | Rotating arms: 9 mm / 6 mm orifice diameter, length 300 mm; Rotameter: 250 to 2500 LPH; Water tank: Stainless steel |
| Free and Forced Vibration Apparatus | Bar-type oscillator (L x W x H): 700 x 25 x 12 mm, 1.6 kg; Coil springs: 0.75 N/mm, 1.5 N/mm, 3.0 N/mm |
| Internal Gear Pinion Drive | Indicators: 2 dials to show rotation; Dimensions: 400 x 200 x 300 mm; Operation: Manual, by hand crank |
| Pulley Demonstration Set | Overall height: 32 inches (approx. 81 cm); Rods: 3 steel rods, 12.5 mm diameter, 81 cm long; Wheel and axle: 1 |
| Vibration Of Spiral Spring Apparatus | Spring stiffness: c = 238 Nmm; Spring cross-section: 10 x 1 mm; Effective spring length: Approx. 800 mm |
A further 24 items in this sub-range are listed on the Theory of Machines page.
General Products (24)
| Product | Key specification |
|---|---|
| Bending Moment Apparatus | Span: 1 m, with supports; Beam: Teak wood; long and short sections connected by a hinge |
| Cantilever Beam Apparatus | Horizontal arm: 75 cm, graduated; Vertical arm: 20 cm; Weight set: One sliding slotted weight set, 100 g to 1 kg |
| Curved Bars And Davits | Specimens: A choice of curved bars and two davits; Mounting: Lower end of the specimen fits to a fixing plate |
| Equilibrium Of Rigid Body | Ladder angle: Adjustable, 15 to 45 degrees; Mounting: For use with the Work Panel; magnetic parts fit to the panel |
| Suspension Cable Demonstration | Mounting: For use with the Work Panel (STF1); magnetic parts fit to the panel; Cable: Roller chain |
A further 19 items in this sub-range are listed on the General Products page.
Civil Engineering Lab Equipment (125)
| Product | Key specification |
|---|---|
| Accelerated Curing Tank | Mould size accepted: 150 mm or 70.6 mm cube moulds; Capacity by model: 6/12, 12/24, 24/48 or 36/72 moulds (150 mm / 70.6 mm) |
| Beam Mould | Face accuracy: Machined flat to ±0.2 mm and finished in size to 0.2 mm; Material: Cast iron or mild steel |
| Compaction Factor Test Apparatus | Hand scoop: 15.2 cm long; Rod: Steel or other suitable material, 1.6 cm diameter, 61 cm long, rounded at one end |
| Cylindrical Mould | Sizes (dia x height): 100 x 200 mm; 150 x 150 mm; 150 x 300 mm; 160 x 320 mm; 300 x 600 mm; Height tolerance: Within ±1 mm |
| Flexure Testing Machine Manual | Specimen: 40 x 40 x 160 mm mortar prisms; Rate of loading: Speed adjusted so load increases at 4 to 6 kg/s |
A further 120 items in this sub-range are listed on the Civil Engineering Lab Equipment page.
Workshop Machine Tools (13)
| Product | Key specification |
|---|---|
| Boring machine | Boring diameter: 65–140 mm or 80–165 mm (two sizes); Maximum boring depth: 300 mm or 400 mm; Spindle speed: 250 or 380 r/min |
| CNC milling Machine | Power source: 200–240 VAC, 50–60 Hz, 3-phase; Controlled axes: 3 axes, all 3 simultaneously controllable; I/O interface: RS-232C |
| Hydraulic Press Machine | Capacity: 5–200 tonnes; Working pressure: 25 MPa; Table travel: 200–270 mm |
| Power Press Machine | Capacity: 5–50 tons; Legs: Presses up to 30 T supplied with C.I. legs; Flywheel: High grade cast iron; diameter 406–660 mm |
| Universal Milling Machine | Table surface: 800 x 175 mm; T-slots: 3, size ½ inch; Table swivel: 45 degrees either side |
A further 8 items in this sub-range are listed on the Workshop Machine Tools page.
Aerodynamics Lab Equipment (9)
| Product | Key specification |
|---|---|
| Effect And Jet Flow | Format: Experiment module; Jet source: Aerodynamically shaped nozzle from which a jet of air emerges |
| Flow Visualisation | Electrical supply: 100–120 VAC, 50–60 Hz or 220–240 VAC, 50–60 Hz; Smoke generator: 410 x 180 x 370 mm; 14 kg |
| Modular Air Flow Bench | Experiment modules served: Base unit for eight different modules demonstrating key air-flow principles and phenomena |
| Subsonic Wind Tunnel | Working section: Square, nominally 150 x 150 mm (6 in nominal), length 455 mm; transparent for visibility |
| Two Channel Recorder | Chart width: 200 mm; Range: 1 mV – 50 V; Configuration: 1-channel and 2-channel versions |
A further 4 items in this sub-range are listed on the Aerodynamics Lab Equipment page.
Power & Energy Systems Trainers (17)
| Product | Key specification |
|---|---|
| Differential Protection Relay | Test connections: 4 mm shrouded sockets to the test circuits; Relay: A Micom industrial relay forms the main part of the unit |
| Distance Protection Relay | Relay: Based on the Micom industrial relay; Earth fault: Directional/non-directional earth fault |
| Overcurrent And Earth Fault Relay | Relay basis: Micom P122 industrial relay; Restricted earth fault: High impedance; Thermal protection: Thermal overload |
| Portable Inductive Load Bank | Enclosure: Robust steel enclosure; Load banks: Three banks of switchable inductive loads |
| Power Factor Load Bank | Inputs: Three separate inputs: Lines 1, 2 and 3; Load banks: Three separate banks: resistive, inductive and capacitive |
A further 12 items in this sub-range are listed on the Power & Energy Systems Trainers page.
Control & Process Engineering Trainers (12)
| Product | Key specification |
|---|---|
| Ball and Beam Apparatus | Ball: Steel ball, free to roll on two parallel tensioned wires; Beam: Carries the wires and pivots at its centre |
| Engine Speed Control Apparatus | Engine: Scale-model engine driven by compressed air, for safety; Load: d.c. generator connected to the engine output |
| Pressure Process Training | Reservoir: Holds the clean water used for experiments; Pump: Three-speed pump; Controller: Industrial controller with auto-tune |
| Process Trainer | System layout: Experiment module plus a control module that links to it; Heating loop: Pump, heater tank and heater |
| Servo Trainer | Control signal: Analogue, 0 to ±10 V, varying servomotor shaft speed in either direction; Position setpoint: Manual control |
A further 7 items in this sub-range are listed on the Control & Process Engineering Trainers page.
Thermodynamics & Heat Transfer Lab Equipment (35)
| Product | Key specification |
|---|---|
| Air Conditioning System Trainer | Cooling-load heaters: 2 heaters in the chamber; power output 0–250 W each, freely adjustable; Humidifier heating power: 400 W |
| Computerized Cooling Tower Test Bench | Cooling column cross-section: 150 × 150 mm; Wet deck specific surface: 110 m²/m³; Thermostat: Switches off at 50 °C |
| Free and Force Convection Apparatus | Air duct flow cross-section: 120 × 120 mm; Height: Approx. 0.6 m; Plate: Heating power 40 W; heat transfer area 2 × 0.01 m² |
| Separating & Throttling Calorimeter with mini boiler Test Bench | Throttling calorimeter range: Vapour content x = 0.95 to 1; Temperature: 240 °C; Pressure: 10 bar |
| Vapour Absorption Refrigeration Trainer | Electric heater: 125 W; Evaporator heater: 50 W, adjustable; Measuring range – temperature: 4 × −80 to 180 °C |
A further 30 items in this sub-range are listed on the Thermodynamics & Heat Transfer Lab Equipment page.
Related Equipment in Other ScienceLab Ranges
Engineering laboratories and workshops also use these measuring and safety items, which are listed in other ScienceLab ranges:
Who Buys This Range
Engineering colleges and universities equip mechanical, civil, electrical and aeronautical laboratories with the fluid mechanics, thermodynamics, materials testing, theory of machines, structures, aerodynamics, power-system and control trainers. Polytechnics use the civil engineering testing apparatus, the engine fault diagnosis simulators, the process trainers and the workshop machine tools for diploma practicals. ITIs and vocational (TVET) training centres order the automotive trainers, cut-section models and workshop machines for mechanic and machining skills. Plastics-technology departments use the melt flow index, tensile and Izod impact testers in the Testing Equipments sub-range. Dealers and tender suppliers order single rigs or complete department laboratories.
Other ScienceLab Equipment Ranges
| Range | What it covers |
|---|---|
| Laboratory | Laboratory hub for heating, sterilising, weighing, centrifuges and clamps |
| Laboratory Instruments | Instruments including a UV-VIS spectrophotometer, colorimeter, DO meter, fume cupboards and an incubator |
| Physics Lab Equipment | Physics apparatus for mechanics, heat, electricity and magnetism, optics, waves and measurement |
| Electricity & Magnetism | School physics apparatus for electrical work, electromagnetism experiments and DIY electronics kits |
| Heat | Apparatus for thermal expansion, conduction, convection, radiation, calorimetry and heat engines |
| Balances | Physical, chemical and electronic balances and mass sets |
| Gloves & Face Masks | Latex, nitrile and vinyl examination gloves, chemical and welding gloves, and surgical masks |
Frequently Asked Questions
What does the Engineering Lab Equipment range include?
405 listed items in 12 sub-ranges: fluid mechanics, thermodynamics and heat transfer, materials testing, theory of machines, structures (General Products), automotive training, civil engineering, aerodynamics, power and energy systems, control and process engineering, polymer testing equipment and workshop machine tools.
Which items does ScienceLab manufacture?
330 of the 405 items are manufactured by ScienceLab, including the theory of machines, structures and control trainers, almost all the fluid mechanics rigs, the wind tunnels, most thermodynamics units, many automotive trainers and most civil engineering moulds and testers.
Which items are supplied rather than manufactured?
75 items are supplied by ScienceLab, including all the workshop machine tools and polymer testing machines, the protection relays, several digital testing machines such as the automatic digital compression testing machine and the Vickers hardness tester, and a few engines such as the turbojet engine test bench.
Which sub-ranges suit civil engineering departments?
Civil Engineering Lab Equipment covers concrete, cement, soil, bitumen and aggregate testing; General Products adds structures apparatus for beams, frames, arches, bridges and trusses; and Fluid Mechanics includes flumes, culvert, bridge pier and sluice gate models for hydraulics practicals.
Which sub-ranges suit mechanical and automotive courses?
Mechanical courses draw on Fluid Mechanics, Thermodynamics & Heat Transfer Lab Equipment, Materials Testing and Properties and Theory of Machines; automotive courses use Automotive Training Equipment; and workshop practice uses the lathes, milling, drilling and welding machines in Workshop Machine Tools.
Is there equipment for electrical, control and aeronautical laboratories?
Yes. Power & Energy Systems Trainers lists protection relays, power-system simulators, transformers, load banks and solar collectors; Control & Process Engineering Trainers lists ball and beam, coupled-tank, servo, PLC and process trainers; and Aerodynamics Lab Equipment lists wind tunnels and Schlieren apparatus.
Do you accept bulk, tender and export orders?
Yes. Bulk quantities, tender enquiries and export orders are accepted, from single rigs to complete department laboratories; product specifications are provided on request so that they can be checked against your tender documents.
What should I include in a quotation request?
Product names or codes (for example SLE/ETC/03 for the Ball and Beam Apparatus), quantities, the department or course the equipment is for, the delivery location and any tender specification.
Request a Quote
Send product names or codes and quantities through the contact page, or add items to your enquiry cart and submit it.
ScienceLab (Jain Scientific Equipments Pvt Ltd)
1226/1-5, Bengali Mohalla, Science Market, Ambala Cantt, Haryana 133001, India
Phone: +91-7082934803
Email: sales@scilabexport.com
