The Balance, High Range is an electronic balance for heavy loads, offered in 16000 g and 32000 g versions that both read to 0.1 g. A high-resolution load cell carries the 175 x 195 mm pan. The balance has a backlit LCD, external calibration, an RS232 interface and functions such as animal weighing, add weighing and piece counting.
| Parameter | Detail |
|---|---|
| Capacity options | 16000 g, 32000 g |
| Resolution | 0.1 g |
| Weighing system and calibration | High-resolution load cell; external calibration |
| Pan size | 175 x 195 mm |
| Display and interface | LCD with backlight; RS232 |
| Housing | Double case structure; ergonomic keypad; plastic protection cover |
| Settings | Selectable filter level; selectable measuring units |
| Units of measure | Grams, milligrams, carats, ounces, pounds, pennyweights, ounce troy, grain, pieces |
| Application functions | Add weighing; animal weighing; piece counting; checkweighing; percentage weighing; density; peak hold; under hook |
| Product code | SLE/LB/19 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Supplied by | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Body weight before dosing. Tare a ventilated container on the pan, put the rat inside and switch to animal weighing so the moving load gives a steady averaged value. Record the mass in grams, convert it to kilograms and work out the dose and volume to draw up. Clean and dry the container between animals.
Sieve analysis of soil. Weigh an oven-dried soil or aggregate sample in a tared tray, shake it through a nest of test sieves and weigh the fraction held on each sieve. Percentage weighing shows each fraction against the whole sample, and the fractions should add back close to the starting mass.
Making up a large batch. Tare a widemouthed polyethylene bottle and use add weighing to put several ingredients into it one after another with a running total. Weigh any ingredient needed in milligram amounts on a precision balance instead, then add it to the batch.
Both versions read to 0.1 g, so choose by the heaviest load you will place on the pan, counting the bucket, tray or cage as well as the sample. The 16000 g version suits most bench work, while the 32000 g version leaves room for bulky containers of soil, grain or water.
Set the balance level in its working place and let it warm up. With the pan empty, start calibration from the keypad as the operating instructions describe, place the calibration mass it asks for at the centre of the pan and remove it when prompted. A calibration weight is not listed with the balance, so check that one is available.
The load cell measures by flexing very slightly, so a heavy object dropped on the pan or a load above capacity can bend it for good. Lower loads gently, never lean on or stand anything heavy on the pan between weighings, and follow the operating instructions before moving the balance.
It shows 0.1 g at any load, but a small sample carries a large relative error at that step, and repeatability matters more as the sample gets lighter. For a few grams or less, a precision balance with finer readability gives a far more reliable result.
A rat seldom keeps still, so a normal reading keeps changing. The animal weighing function takes many readings over a short period and shows their average as one steady value. Tare the container first, place the animal gently and record the averaged mass straight away.
Dose rates are usually given in milligrams per kilogram, while this balance shows grams and has no kilogram unit in its list. Divide the reading in grams by a thousand, multiply by the dose rate, then divide by the drug concentration to get the volume. Check the units at every step.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026