Balance, Portable is an electronic student balance offered in 500 g, 1000 g and 2000 g capacities, each reading to 0.1 g. It runs from the included DC mains supply or from 4 AA batteries bought separately, so groups can carry it outdoors. A spill-resistant ABS body, a 130 mm stainless steel pan and a backlit LCD suit daily class use.
| Parameter | Detail |
|---|---|
| Capacity options | 500 g, 1000 g, 2000 g |
| Readability | 0.1 g |
| Pan | 130 mm, stainless steel |
| Body | ABS, spill-resistant design to keep liquid out |
| Display | Backlit LCD |
| Weighing units and functions | kg, g, lb, oz, ozt, ct, dwt; counting function |
| Levelling | 4 adjustable feet |
| Power | Mains or batteries; DC mains power supply included; 4 x AA batteries supplied separately |
| Dimensions | 170 x 210 x 65 (W x D x H, as listed) |
| Product code | SLE/LB/20 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Supplied by | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Water content of garden soil. Take the balance outdoors on battery power and weigh a fresh soil sample in a tared plastic weighing boat. Back in the lab, spread the soil thinly and leave it to dry in air for several days, then weigh it again on mains power. The loss in mass divided by the fresh mass estimates the water content, as air-dried soil still holds a little water.
Water uptake by seeds. Weigh a counted batch of dry bean or pea seeds, then soak them in a vented petri dish of water. Each day, blot the seeds dry on paper towel and weigh them again. A graph of mass against time shows how fast seeds take up water before they start to germinate.
Conservation of mass. Pour copper sulfate solution into a conical flask and stand a small tube of dilute sodium hydroxide solution upright inside it, so the two liquids stay apart. Weigh the whole set, tilt the flask until a blue precipitate forms, and weigh it again. Wear goggles, as the alkali harms the eyes.
Each model reads to 0.1 g, so the choice rests on the loads your groups handle. The 500 g model suits salts, seeds and density blocks. The 1000 g model also takes small beakers of solution. The 2000 g model weighs a tray of soil or a beaker of water in biology and fieldwork.
Use the included DC mains supply on the bench, where a socket is close and the session is long. Fit 4 AA batteries, bought separately, for the school garden, a field trip or a room with no socket. Switch the balance off between groups outdoors so the batteries last the whole trip.
Put the empty container, such as a weighing boat or small beaker, on the pan and press tare so the display returns to zero. Add the sample, wait for the figure to settle and read the mass of the sample alone. Write it straight into the notebook before anyone presses tare again.
Switch off, lift the container clear and wipe the stainless steel pan and the ABS body with a soft damp cloth, then dry them. The spill-resistant body keeps splashes out, but it is not meant to stand in liquid. Always weigh into a container instead of pouring onto the pan.
Place a set number of identical items, such as washers or paper clips, on the pan as a sample. The balance works out the mass of one item and then shows how many items lie on the pan as more are added. Counting works well only when the items are close in mass.
Turn the 4 adjustable feet until the balance sits level and stands firm, with no rocking when a corner is pressed. Check it with a small spirit level on the pan each time the balance moves to a new bench or goes outdoors. A tilted balance can give one group a different reading from the next for the same object.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026