Barium Sulphate is a dense white salt that is practically insoluble in water, supplied as an analytical reagent in a 500 gm pack with an MSDS. Teachers keep it as a known sample for the sulphate test, so students can set their own white precipitate beside it, and for insolubility and filtration exercises.
| Parameter | Detail |
|---|---|
| Product | Barium Sulphate |
| Form | Dense white, practically insoluble salt |
| Grade | Analytical reagent |
| Pack capacity | 500 gm |
| Supplied with | MSDS (Material Safety Data Sheet) |
| Product code | SCL368/086 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Supplied by | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Sulphate test beside a known sample. Dissolve a little magnesium sulphate in water in a test tube, add a few drops of dilute hydrochloric acid and then barium chloride solution. A white precipitate appears. In a second tube, shake a pinch of barium sulphate from the pack with water and the same acid, and compare the two solids.
Acid behaviour of white solids. Put a pinch of barium sulphate in one tube and a pinch of calcium carbonate powder in another, then add dilute hydrochloric acid to each. The carbonate fizzes and dissolves, while the sulphate stays as a white solid. Students learn why a sulphate precipitate must survive the acid before it counts.
Filtering an insoluble salt. Stir barium sulphate into water, let it settle and pour the mixture through Whatman's filter paper in a glass funnel. Rinse the last solid out of the beaker with distilled water from a wash bottle, wash the residue on the paper and leave it to dry. A clear filtrate shows the paper held the fine solid back.
Carbonate and sulphite ions also form white barium precipitates, so a neutral sample can give a false positive. Dilute hydrochloric acid removes carbonate as carbon dioxide and stops sulphite from precipitating. A white precipitate that still forms in the acidified solution is then barium sulphate, which shows sulphate ions.
Sulphuric acid adds sulphate ions of its own. Every tube would then give a white barium sulphate precipitate, whether or not the sample contained sulphate. Use dilute hydrochloric acid, or nitric acid if the same sample will later be tested for chloride with silver nitrate.
Both are white, so the look of the solid is not enough. Add dilute hydrochloric acid. Barium carbonate fizzes as carbon dioxide escapes and then dissolves, while barium sulphate stays undissolved. Shaking a little of the reagent from this pack with the acid shows students what a persistent precipitate looks like.
Freshly formed barium sulphate is made of very small particles. Keeping the mixture warm, without boiling, for a while lets the particles grow before filtering. If the filtrate still looks cloudy, pass it through the same paper again. Pour the liquid down a glass rod and never fill the paper above its rim.
Collect a few drops of the latest washings in a clean tube and add silver nitrate solution. A white cloudiness means chloride from the barium chloride is still present, so keep washing with warm distilled water. When the washings stay clear, the precipitate is clean enough to dry and weigh.
No. It is supplied as an analytical reagent for laboratory teaching and analysis, not as a medical or pharmaceutical product. Keep it to bench work: weigh it in a clean, dry area, avoid raising the fine dust and follow the supplied MSDS for storage and disposal.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 15 November 2026