Benedicts Reagent (Test Of Glucose) is a blue, copper-based analytical reagent in a 500 ml pack with an MSDS. Despite its name, it detects every reducing sugar, including glucose, fructose, maltose and lactose. Heated with a sample in a boiling water bath, it turns from blue through green, yellow and orange to a brick-red precipitate as the sugar content rises.
| Parameter | Detail |
|---|---|
| Product | Benedict's reagent for the test of glucose (reducing sugars) |
| Appearance | Blue, copper-based solution |
| Grade | Analytical reagent |
| Pack capacity | 500 ml |
| Documentation | Supplied with MSDS |
| Product code | SCL370/088 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Supplied by | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Food test for reducing sugar. Mash or grind each food with a little distilled water and pour the liquid into labelled test tubes. Add an equal volume of the reagent, stand the tubes in a copper water bath of boiling water for a few minutes, then lift them out with a test tube holder and record each colour.
Controls beside the samples. Run a tube of glucose solution as the positive control and a tube of distilled water as the negative control. Add a tube of sucrose solution too. It stays blue, which shows students that not every sugar reduces the reagent.
Ranking samples by colour. Make a set of glucose solutions of known strength, heat each with the same volume of reagent for the same time, and line the tubes up as a colour scale. Fruit juices, milk or extracts of germinating seeds ground in a pestle and mortar can then be placed on the scale.
Test for non-reducing sugar. If a sample stays blue, boil a fresh portion with dilute hydrochloric acid in the water bath, cool it and add sodium bicarbonate until the fizzing stops. Check it with pH paper, then repeat the test. A colour change now shows a non-reducing sugar such as sucrose.
No. It detects any reducing sugar, meaning a sugar with a free aldehyde or ketone group that can give electrons to the copper ions. Glucose, fructose, galactose, maltose and lactose all give a positive result. Sucrose has no free group of this kind, so it leaves the reagent blue until it has been hydrolysed.
The sugar reduces the blue copper(II) ions to copper(I) oxide, which comes out as a brick-red precipitate. A little precipitate mixed with the remaining blue solution looks green, and more turns the mixture yellow, then orange. Note that the sugar reduces the copper, not the other way round, and write brick red rather than red.
A direct flame heats the tube unevenly, so the mixture can bump and spit out of the mouth. Boiling water holds every tube at the same temperature for the same time. That keeps the colours fair to compare, provided the heating time is noted and kept the same for all tubes.
Sucrose gives no colour change on its own. Boil a fresh sample with dilute hydrochloric acid to split it into glucose and fructose, cool it, then neutralise it with sodium bicarbonate and check the pH. Leftover acid stops the alkaline reagent from working, so skipping this step gives a false negative.
Only roughly. The test is semi-quantitative, and the shade also depends on heating time, volumes used and the person judging it. Compare samples against glucose standards heated in the same way. For actual figures, filter and weigh the precipitate, or measure the remaining blue colour in a colorimeter.
Rinse and brush the tubes as soon as the test is finished, before the copper oxide deposit dries onto the glass. A film that remains can be loosened by a teacher or technician with a little dilute acid swirled round the tube, followed by a thorough rinse with water. Keep the reagent bottle capped between sessions.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 15 November 2026