Circuit Board Worcester (Product Code: SCI-1479/026) is a Worcester-type circuit-building kit used to assemble and test simple electric circuits quickly in school physics and general science laboratories. Clip-on phosphor-bronze strips spring over metal pillars on a baseboard, and each board comes with 18 flash lamp bulbs, lamp-holder connectors, a rheostat unit, bell pushes and wires. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
| Parameter | Detail |
|---|---|
| Board | Baseboard with terminals and a set of metal connection pillars |
| Connection strips | Clip-on flexible phosphor-bronze strips that slip over the pegs and are held by their natural spring for good electrical contact |
| Lamps | 18 flash lamp bulbs, 1.25 V |
| Connectors | 9 connectors with lamp holder; 12 plain connectors; 1 connector with rheostat |
| Components | 1 rectifier; 1 resistor; 2 mounted bell pushes |
| Leads and clips | 2 flexible leads with 4 mm plug and crocodile clips; 2 flexible leads with crocodile clips; 2 crocodile clips |
| Wires | 1 length bare copper wire, 20 s.w.g.; 1 length bare eureka wire, 34 s.w.g.; 1 length plastic-covered wire, 0.6 mm |
| Other items | 2 soft iron nails, 50 mm, square head; 1 hardboard disc, drilled; 4 pencil leads; 1 piece copper foil; 1 piece steel wool |
| Product code | SCI-1479/026 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
A Worcester circuit board lets a whole class build real circuits in minutes without soldering or loose wires sliding off terminals. Students flex a strip slightly, drop it over two pillars and let it spring into place, so series and parallel lamp circuits, switch circuits with the bell pushes and variable-brightness circuits with the rheostat can be set up, changed and taken apart during one lesson.
The extra materials widen the range: the eureka and copper wires compare resistance of different conductors, pencil leads show that graphite conducts, the soft iron nails and covered wire make a simple electromagnet, and the rectifier introduces one-way current flow. That breadth makes it a practical electricity experiment kit for school middle and secondary classes.
The Circuit Board Worcester is made by Jain Scientific Equipments Private Limited, the OEM that trades as ScienceLab, at its own licensed factory at Saha, Ambala, Haryana. The company is a registered MSME enterprise (Udyam UDYAM-HR-01-0003714) and ships export orders under Importer-Exporter Code AAECJ8618A (DGFT). Schools and dealers deal with the maker directly, so repeat kits or replacement parts can simply be requested from us. See the ScienceLab profile.
Items that support circuit practicals on the Circuit Board Worcester:
Browse Electricity & Magnetism or the full Laboratory Equipment section.
What components come with the Circuit Board Worcester?
Each Circuit Board Worcester comes with 18 flash lamp bulbs, 9 lamp-holder connectors, 12 plain connectors, a rheostat connector, a rectifier, a resistor, two bell pushes, leads, crocodile clips, three types of wire, soft iron nails, pencil leads, copper foil, steel wool and a drilled hardboard disc.
How do the connection strips on the Circuit Board Worcester work?
The Circuit Board Worcester uses phosphor-bronze connection strips. When flexed a little they slip over the pegs, and their natural spring then holds them in place and keeps a good electrical contact, so circuits can be built and changed quickly.
What experiments can be done with the Circuit Board Worcester?
The Circuit Board Worcester supports series and parallel lamp circuits, switching with bell pushes, brightness control with the rheostat, comparing resistance of copper and eureka wire, testing graphite conduction with pencil leads and building a simple electromagnet with the soft iron nails.
Is a battery or power supply included with the Circuit Board Worcester?
A battery or power supply is not listed among the Circuit Board Worcester components. Let us know which low-voltage source your lab uses, or ask us to quote a suitable one, when you request a quotation through our contact page.
Who manufactures the Circuit Board Worcester?
The Circuit Board Worcester is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own licensed factory in Ambala, Haryana, India. Quotations, repeat orders and questions about spare parts are all handled by the manufacturer.
Can the Circuit Board Worcester be supplied for a whole class?
Yes, the Circuit Board Worcester can be quoted in class quantities for schools, colleges, tenders and dealers across India and international markets. State how many boards you need and your delivery location for an accurate quotation.
Send your Circuit Board Worcester requirement through the contact page or add it to the enquiry cart. Quotations come straight from the manufacturer.
Last updated: 24 September 2026