- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Handpump DA 9-15m Variant
Handpump DA 9-15m Variant (Product Code: SLE/PRP/05) is a direct action (low-lift, shallow-well) hand pump set used to draw water from shallow boreholes at community, school and camp water points. Its specification covers cylinder installation depths of 9 to 12 metres, with a glued (solvent-cemented) PVC riser main, PVC pump rods, well screen, sand trap and installation tools in the set. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Pump type | Direct action (low-lift / shallow well) hand pump |
| Cylinder installation depth | 9 to 12 metres (as specified) |
| Riser main and rods | PVC, glued (solvent-cemented) threaded joints |
| Handle | Complete handle assembly with rubber cushions |
| Pump body | Complete set with handle retainer and HDPE top bush; conical rubber grommet (modified) |
| Mounting | Bottom flange assembly with bolts and intermediate conical flange, for bolting onto a concrete platform |
| Pump rods | PVC pump rod and PVC top pump rod, threaded joints cemented, 42 mm OD x 3 metres |
| Piston | Piston rod and piston assembly |
| Raising main | PVC top raising main and PVC raising mains, threaded joints cemented, 60 mm OD x 3 metres |
| Cylinder | PVC cylinder pipe assembly, 60 mm OD x 2 metres, with one complete foot valve assembly and one rubber seat |
| Well screen | PVC well screen assembly, 2 metres long |
| Reducers | PVC reducing socket (88.5 mm ID, max. 93 mm OD at top, to fit 89 mm OD casing pipe; 60 mm OD at bottom) and PVC cylinder reducer (60 mm ID at top; 48 mm ID at bottom, to fit 48 mm OD lower casing) |
| Lower casing | PVC, 48 mm OD x 3 metres, with bell connectors |
| Sand trap | PVC sand trap complete assembly with end cap, 48 mm OD x 1 metre, with connector |
| Tools | Double ended spanner; combination spanner; MS retrieving rod, 2.20 metres long, electro-galvanized |
| Solvent cement | 250 ml in an aluminium extruded bottle with PE stopper, sealed with a plastic cap |
| Product code | SLE/PRP/05 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Direct Action Handpump Used For?
A direct action hand pump has no lever mechanism: the user lifts and pushes the handle, which moves the pump rod and piston straight up and down inside the cylinder. That makes it well suited to shallow water tables, where the lift is short and the pump can be installed and maintained by a small trained team. The Handpump DA 9-15m Variant arrives as a complete set, from the handle and pump body at the surface down to the well screen and sand trap at the bottom of the borehole.
During installation, the PVC raising mains and pump rods are joined with the supplied solvent cement, the reducers step the casing down to the 48 mm lower casing, and the bottom flange is bolted to a concrete platform around the well head. The two spanners and the retrieving rod stay with the caretaker for routine maintenance of the below-ground parts.
What to Specify When Ordering
- Planned cylinder setting depth for each borehole (the listed specification covers 9 to 12 metres).
- Number of pump rod and raising main lengths needed beyond the standard set for that depth.
- Casing pipe size at the site, so the 89 mm OD reducing socket matches it.
- Number of complete pump sets required.
Supplier
Jain Scientific Equipments Private Limited, known to customers as ScienceLab, supplies this direct action pump set from Ambala, Haryana, India, sourcing it for water-supply projects run by NGOs, contractors, schools and public bodies in India and international markets. For vendor registration, the supplying company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Read more on the ScienceLab profile page.
Related Water, Sanitation & Hygiene Supplies
Compare this shallow-well pump with other water-lifting options in the range:
- Handpump Variant 3 Norm — a galvanized hand pump package for 65 mm riser pipes and stainless steel rods.
- Handpump SS-Riser 32ND — stainless steel riser pipe and rod lengths for steel rising mains.
- Pump Electric sbmr bh 18cbm/hr — an electric borehole pump where mains or generator power is available.
- Pump Centrifugal, Diesel 50cbm/hr — a diesel pump for high-volume surface water transfer.
All water-point items are listed under Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What depth is the Handpump DA 9-15m Variant designed for?
The listed specification of the Handpump DA 9-15m Variant covers cylinder installation depths of 9 to 12 metres. For a setting closer to the 15 metres in the product name, confirm the extra pipe and rod lengths with us through the contact page before ordering.
What is included in the Handpump DA 9-15m Variant set?
The Handpump DA 9-15m Variant set includes the handle and pump body assemblies, bottom flange, PVC pump rods and raising mains, piston assembly, cylinder with foot valve, well screen, reducers, lower casing, sand trap, two spanners, a retrieving rod and a bottle of solvent cement.
How are the pipes of the Handpump DA 9-15m Variant joined?
The PVC raising mains and pump rods of the Handpump DA 9-15m Variant have threaded joints that are glued with solvent cement; a 250 ml bottle of cement in an aluminium extruded bottle with PE stopper is part of the set. Joints should be clean and dry before cementing.
How is the Handpump DA 9-15m Variant mounted?
The Handpump DA 9-15m Variant is mounted with a bottom flange assembly, bolts and an intermediate conical flange that bolt onto a concrete platform built around the well head. The concrete platform itself is prepared on site and is not among the listed items.
Which casing does the Handpump DA 9-15m Variant reducer fit?
The reducing socket of the Handpump DA 9-15m Variant has an 88.5 mm inside diameter at the top to fit an 89 mm OD PVC casing pipe, and the cylinder reducer steps down to fit the 48 mm OD PVC lower casing supplied in the set.
Who supplies the Handpump DA 9-15m Variant?
The Handpump DA 9-15m Variant is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. The company sources the pump set and quotes it for WASH projects, contractors and institutional buyers in India and international markets.
Request a Quote
Send the number of pump sets, your borehole depths and the delivery location through the contact page, or place the Handpump DA 9-15m Variant in the enquiry cart to receive a quotation.
Last updated: 24 September 2026
