Hazard Warning Tape: Biohazard Manufacturer,Supplier and Exporter in India

Hazard Warning Tape: Biohazard (Product Code: SLE/CH/210) is a self-adhesive vinyl labelling tape printed with the biohazard warning pictogram, used to mark containers, shelves, cupboards, bins and equipment that hold biological material. The white tape is hard wearing, 25 mm wide and supplied as a 66 m roll, so one roll labels a large number of items. Microbiology, biotechnology and clinical teaching labs use it alongside other microbiology lab equipment in India, and it is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

Cut a length of tape covering one or two symbols and apply it to the lid and side of a culture waste container, the door of an incubator or a refrigerator holding cultures, or the edge of a shelf reserved for contaminated items. Because the pictogram repeats every 75 mm with a blank gap in between, the tape can be cut in the gap without slicing through a symbol, and each piece carries a complete warning. The white background keeps the symbol easy to see on dark or metal surfaces.

Apply the tape to clean, dry, grease-free surfaces and smooth it down from one end to avoid trapped air. Consistent biohazard labelling is part of good lab waste disposal practice: students and cleaning staff can recognise at a glance which containers must go for decontamination rather than into general waste. Replace labels that become worn, and remove old tape when a container is taken out of biohazard service.

Supplier

This tape is supplied by Jain Scientific Equipments Private Limited, the incorporated company behind the ScienceLab name, based in Ambala, Haryana. For vendor registration, its details are CIN U29309HR2020PTC087597 and GSTIN 06AAECJ8618A1ZT. See our company profile for more.

Related Laboratory Equipment

Items used with biohazard tape in the handling and disposal of biological waste:

• Biohazard Bag — collects contaminated waste in the area the tape marks out.
• Autoclave Bag Disposable — for sterilising waste before it leaves the lab.
• Autoclave Tape — shows that a bag or pack has been through the autoclave.
• Hazard Warning Tape: Corrosive — matching symbol tape for areas holding corrosive chemicals.

Explore more items in Chemistry Lab Equipment.

Frequently Asked Questions

How much tape is on a roll?
Each roll carries 66 m of 25 mm wide tape.

How often is the symbol printed?
The biohazard pictogram repeats every 75 mm, with a blank area between symbols.

Is the tape suitable for curved surfaces such as bins and bottles?
The vinyl tape is self-adhesive and hard wearing. For tightly curved or very cold surfaces, test a short piece first, and contact us if you need advice.

Will it survive autoclaving?
Autoclave resistance is not stated for this tape. For items that go into the autoclave, use autoclave tape and ask us through the contact page about suitability.

Can I order other hazard symbols?
Yes. Separate hazard warning tapes are listed for other hazard types, including corrosive, explosive, flammable and irritant.

Do you supply in quantity for institutions or export?
Yes. Tell us how many rolls you need and where they should be delivered; we serve buyers in India and international markets.

Request a Quote

For pricing on the Hazard Warning Tape: Biohazard, contact us through our contact page or add it to the enquiry cart.

Last updated: 24 September 2026