- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Lamp Holder
Lamp Holder (Product Code: SLE/PHY/77) is a bulb-holder unit used to connect a miniature screw lamp into circuits in school electricity lessons. It is fitted with an MES (miniature Edison screw) type bulb holder and terminals, so an MES bulb screws straight in and circuit leads attach to the terminals. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as junior science lab equipment for primary and secondary classes.
Key Details
| Parameter | Detail |
|---|---|
| Bulb fitting | MES (miniature Edison screw) type bulb holder |
| Connections | Terminals for circuit leads |
| Bulb | Not listed as included — ask us if you need MES bulbs quoted |
| Product code | SLE/PHY/77 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Lamp Holder Used For?
A small bulb is the simplest current indicator a class can use, and the lamp holder turns it into a part that connects cleanly into a circuit. Students use several holders to compare bulbs in series and in parallel, to build a continuity tester that sorts materials into conductors and insulators, and to show how a switch or a break in the wire stops the current.
Because the bulb screws in, a failed lamp can be replaced in seconds without rewiring, which keeps practical lessons moving. Screw the bulb in finger-tight only, match the bulb voltage to the cells in use, and tighten the leads under the terminals before switching on. It is everyday physics lab equipment in Indian school classrooms from the first circuits onwards.
What to Specify When Ordering
- Number of lamp holders per class or group
- Whether MES bulbs should be quoted with the holders, and at what voltage
- Leads or cell holders needed to complete each circuit
Supplier
ScienceLab is the trading name under which Jain Scientific Equipments Private Limited supplies this lamp holder, along with bulb holders, leads and other circuit parts, to schools and dealers from Ambala, Haryana. One enquiry can cover the holders and the accessories needed to use them. Company information is on the ScienceLab profile.
Related Physics Lab Equipment
Other holders and connectors used in the same bulb circuits:
- MES Bulb Holder — another MES holder listing for comparison
- Simple Circuit Module Lamp Holder — a lamp holder on a plug-together module board
- Lamp Holder (Economy Switch) — an economy option for large class sets
- Receptacle for Miniature Lamp — an alternative receptacle for small lamps
- Crocodile Clips & Leads — to connect the terminals into a circuit
The complete range is in Physics Lab Equipment.
Frequently Asked Questions
What bulb fits this Lamp Holder?
This Lamp Holder is fitted with an MES (miniature Edison screw) type bulb holder, so it takes MES screw-base bulbs. Choose a bulb voltage that matches the cells or supply used in the lesson so the lamp glows properly without burning out.
Is a bulb included with the Lamp Holder?
A bulb is not listed as part of the Lamp Holder, which is described as the holder with its MES fitting and terminals. If you want MES bulbs quoted along with the holders, state the quantity in your enquiry through the contact page.
How are wires connected to the Lamp Holder?
Wires connect to the Lamp Holder through its terminals. Fasten bare wire ends or leads under the terminals before switching on, and check the bulb is screwed fully into the MES holder so the circuit is complete.
Which experiments use the Lamp Holder?
The Lamp Holder is used in experiments on complete circuits, bulbs in series and parallel, conductors and insulators, and the effect of switches. Several holders on one bench let students compare bulb brightness directly as they change the circuit.
Who supplies the Lamp Holder?
The Lamp Holder is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. It is sourced as a standard circuit part and can be supplied together with bulbs, leads and cell holders for school electricity lessons.
Can schools buy the Lamp Holder in bulk?
Yes, the Lamp Holder can be ordered in bulk for class sets and dealer stock, for delivery in India and international markets. Send the quantity and your location through the enquiry cart or contact page to receive a quotation.
Request a Quote
Ask for a Lamp Holder quotation through the contact page, or add it to the enquiry cart together with any bulbs and leads.
Last updated: 24 September 2026
