Liebig Condenser Manufacturer,Supplier and Exporter in India

Liebig Condenser (Product Code: SLE/CH/148) is a straight, water-cooled condenser in borosilicate glass, with the inner tube integral with the body and a 200 mm jacket length. Its narrow jacket keeps the cooling water flowing close to the inner tube for efficient cooling, so hot vapour passing through is turned back into liquid quickly during distillation or reflux. School chemistry labs, college practical rooms and teaching laboratories use it as a standard part of their glassware, and it is a common requirement for buyers looking for a Liebig condenser in India. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

In a simple distillation the condenser is clamped at a downward slope between the still head and the receiver, so condensed liquid runs out of the lower end into the collecting flask. Cooling water goes in at the lower connection and out at the upper one, which keeps the jacket completely full and gives the best cooling along the full 200 mm length. Because the inner tube is integral with the body, there is no separate seal between tube and jacket that could loosen or leak with repeated heating.

Clamped vertically above a boiling flask, the same unit works as a reflux condenser in the lab, returning condensed solvent to the reaction so it can be heated for longer without boiling dry. Start the water flow before switching on the heat, keep the flow steady rather than fierce, and hold the condenser with a clamp around the middle of the jacket. Let the glass cool before draining and dismantling, and never run cold water through a condenser that has been heated while dry.

Manufacturer

ScienceLab is the name under which Jain Scientific Equipments Private Limited, an Ambala, Haryana manufacturer of laboratory glassware and teaching apparatus, is known to customers. A Liebig condenser is also part of the company’s Fractional Distillation Assembly, so labs using that set can order a spare from the same source after checking the joint size with us. Institutions in India and international markets can find more on our company profile.

Related Laboratory Equipment

A condenser is one part of a distillation or reflux set-up; these items make up the rest of that workflow.

• Fractional Distillation Assembly — a complete set with a Vigreux column for separating close-boiling liquids.
• Distillation Apparatus — a ready-made simple distillation set.
• Round Bottom Flask — the boiling flask for distillation or reflux.
• Rubber Tubing — water connections to the condenser jacket.
• Universal Clamp — holds the condenser securely at the right angle.

Find more glassware and supports in our Chemistry Lab Equipment category.

Frequently Asked Questions

What is the jacket length?
The jacket is 200 mm long.

What joints or end fittings does it have?
End fittings are not specified on this page. Tell us the joint size of your flask and still head through our contact page and we will confirm a match.

Can it be used for reflux as well as distillation?
Yes. Clamp it at a downward slope for distillation, or vertically above the flask for reflux.

Why is a narrow jacket better?
It keeps the cooling water close to the inner tube, which gives efficient cooling without needing a large volume of water in the jacket.

How should it be cleaned?
Rinse the inner tube with a suitable solvent or water after use and let it drain. Avoid sudden temperature changes, such as cold water on hot glass.

Can you replace condensers across a whole lab?
Yes. Send the product code SLE/CH/148, the quantity and your delivery address; we supply institutions in India and international markets.

Request a Quote

For a quotation on the Liebig Condenser, contact us via the contact page or add it to the enquiry cart together with flasks, clamps and tubing.

Last updated: 24 September 2026