The Portable Precision Balance weighs up to 1000 g with a readability of 0.01 g, on mains power or on an internal battery rated for 24 hours. It calibrates internally without external weights, sends results over USB or RS-232 and has a hook for below-balance weighing, so it works at a field station as well as on a lab bench.
| Parameter | Detail |
|---|---|
| Capacity and readability | 1000 g x 0.01 g |
| Repeatability / linearity | 0.01 g / 0.02 g |
| Calibration | Internal manual calibration or external calibration |
| Pan | 120 mm diameter, grade 304 stainless steel |
| Weighing units | g, lb, oz, N, GN, ct, dr, dwt, mm, ozt, T, tl.H, tl.S, tl.T |
| Display | Backlit LCD, 18 mm display height, programmable backlight, built-in capacity tracker |
| Interfaces | RS-232 and USB |
| Power | 12V DC 50/60Hz 800mA adapter or internal rechargeable battery, both included; battery life 24 hours |
| Housing | ABS plastic, 174 x 252 x 80 mm (W x D x H), 2 kg net; operating temperature 0° to 40°C |
| Product code | SLE/LB/24 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Supplied by | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Volume of a stone by displacement. Stand a glass beaker of water on the pan and tare it. Hang a stone on cotton thread from a retort stand and lower it until it is fully under water without touching the glass. The rise in grams equals the stone's volume in cubic centimetres, and its mass in air divided by that volume gives its density.
Suspended solids in pond water. Weigh a dry filter paper before the trip. At the pond, filter a measured volume of water through it in a glass funnel and carry the paper back in a labelled petri dish. Dry the paper, weigh it again on the same balance, and the gain is the mass of solids in that volume.
Mass and weight on one display. Weigh an object in grams, then switch the display unit to newtons and note the value. Hang the same object from a force meter, compare the two readings, and discuss why the balance can show newtons only by assuming a value for the pull of gravity.
Software functions include parts counting with preset sample sizes, memory accumulation, selectable digital filtering, zero tracking, an audible overload alarm and a programmable auto power-off.
On the hardware side there are dual tare keys for left or right hand, colour-coded keys, three-point shock protection against overload, a level indicator with adjustable feet and an included hook for below-balance weighing. Balances with the 120 mm pan stack for storage, and a slot takes an optional Kensington-type lock and cable.
Yes. Its internal manual calibration is started by the user and needs no external weights, so none have to travel. Run it whenever a check reading looks wrong. External calibration is also listed, for labs that want to adjust the balance against their own weights back at base.
Set the balance on a firm surface and turn the adjustable feet until the level indicator is centred. Shield the pan from wind with a cardboard box open on one side, and raise the digital filter setting so the display ignores small movements. Readings then take a little longer to settle.
Position can change the reading. A load near the edge may read slightly differently from the same load at the centre, an effect called off-centre loading error. Place samples and containers in the middle of the pan, and keep the same position when readings are compared.
The water pushes up on the object, and the object pushes down on the water with an equal force. The balance feels that extra push through the beaker. The rise equals the mass of water the object displaces, which is why a tared beaker can measure an object's volume.
Not quite. The balance is set up to read mass, and in newton mode it multiplies that mass by a standard value of the pull of gravity. A spring force meter responds to the actual pull, so the two readings can differ slightly.
Charge it fully from the included adapter before a field day, since the 24 hour rating assumes a full charge. Turn on the programmable auto power-off to save charge between weighings. If the battery stops holding charge as long as it did, run the balance from the adapter and have the battery checked.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 15 November 2026