Retort Clamp Special 3-Prongs, 18/10-Stainless Steel Manufacturer,Supplier and Exporter in India

Retort Clamp Special 3-Prongs, 18/10-Stainless Steel (Product Code: SLE/RC/02) is a three-finger laboratory clamp used to hold glassware of different diameters on a support stand. Its stainless steel fingers carry a silicone coating that cushions the glass, and it comes 190 mm long on a 12 mm shaft with a span of 0–80 mm or 0–120 mm. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 3-Prong Special Retort Clamp Used For?

Three fingers close on an object from three directions, centring round-bottom flasks, separating funnels, condensers and columns more naturally than a two-jaw clamp. Because the span opens from zero, the 0–80 mm version holds slim tubes as well as medium flasks, while the 0–120 mm version reaches wider vessels. That range lets one clamp serve many setups in chemistry lab glassware work, from distillation to filtration.

The silicone coating on each finger grips without scratching and spreads the load on glass, cushioning it without extra padding. Mount the 12 mm shaft in a bosshead, position the clamp before tightening, and check that the vessel hangs straight before adding liquid or heat. Keep the coated fingers away from direct flame.

What to Specify When Ordering

• Span version — 0–80 mm or 0–120 mm, based on the widest vessel you need to hold.
• Quantity — the number of clamps per bench or per stand.
• Bossheads — confirm that yours accept a 12 mm shaft, or add stainless bossheads to the order.

OEM Manufacturer

This 3-prong clamp comes from ScienceLab, the trade name of Jain Scientific Equipments Private Limited, which is its OEM and produces it at the company's own licensed factory at Saha, Ambala, Haryana, India. Research laboratories, universities, schools, dealers and importers in India and international markets buy it direct from the manufacturer rather than through a trading house. For spare parts on clamps already in use, just ask us. Read about the company on the ScienceLab profile.

Related Retort Clamps and Stand Parts

These stainless fittings and alternative clamps complete a setup built around the 3-prong special clamp:

• Bosshead Swivel Type, 18/10 Stainless Steel — lets the clamp be set at an angle, useful for condensers.
• Bosshead Cross Type 18/10 Stainless Steel — a fixed right-angle connection to the support rod.
• Base Frame tube, 18/10 Stainless Steel — for frame setups that carry several clamps.
• Retort Clamp Standard 18/10 Stainless Steel — a round-jaw alternative in seven fixed spans.
• Retort Clamp Special 4-Prongs — adds a fourth finger for larger or heavier vessels.

See the complete Retort Clamp range for other jaw types.

Frequently Asked Questions

What sizes is the Retort Clamp Special 3-Prongs available in?
The Retort Clamp Special 3-Prongs, 18/10-Stainless Steel is available in two versions, both 190 mm long with a 12 mm shaft: one with a 0–80 mm span and one with a 0–120 mm span.

Why are the fingers of this 3-prong clamp silicone coated?
The fingers of the Retort Clamp Special 3-Prongs carry a silicone coating so they grip glassware firmly without metal-to-glass contact, which helps prevent scratches and spreads the pressure on thin-walled flasks and tubes.

How does the 3-prong special clamp differ from a standard retort clamp?
The Retort Clamp Special 3-Prongs uses three silicone-coated fingers that centre round vessels and open from zero, whereas a standard retort clamp has bare round jaws in fixed span sizes. The 3-prong design suits mixed diameters on one stand.

Who manufactures the Retort Clamp Special 3-Prongs?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Retort Clamp Special 3-Prongs, 18/10-Stainless Steel as the OEM, making it at its own licensed factory at Saha, Ambala, Haryana, India, and supplying it directly to labs, dealers and importers.

Can the 3-prong special clamp be used near a burner?
The Retort Clamp Special 3-Prongs can hold glassware in a heated setup, but keep its silicone-coated fingers out of direct flame and let hot glass cool before adjusting the clamp. Position it around the neck of the vessel, away from the hottest zone.

How do I request a quote for the 3-prong special retort clamp?
To request a quote for the Retort Clamp Special 3-Prongs, state the span version (0–80 or 0–120 mm), the quantity and any bossheads or stand parts needed, then send it through the contact page. The manufacturer replies directly.

Request a Quote

Add the Retort Clamp Special 3-Prongs, 18/10-Stainless Steel to the enquiry cart or write to us through the contact page with your span choice and quantity. Every quote comes directly from ScienceLab as the manufacturer.

Last updated: 24 September 2026