- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Rods For Stand Bases
Rods For Stand Bases (Product Code: SLE/LR/14) are unthreaded 18/10 stainless steel support rods used to build retort stands and clamp set-ups on bases, feet, frames and table clamps in school, college and research laboratories. They are listed in lengths from 500 to 1500 and in three diameters, D/Ø 12, 13 and 16, giving fifteen size combinations to match the fitting and the height of the apparatus. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and serve as new or spare rods for labs across India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Support rods for stand bases, without thread |
| Material | 18/10 stainless steel |
| D/Ø 12 — lengths (A, as listed) | 500, 600, 750, 1000, 1250, 1500 |
| D/Ø 13 — lengths (A, as listed) | 500, 600, 750, 1000, 1250, 1500 |
| D/Ø 16 — lengths (A, as listed) | 1000, 1250, 1500 |
| Product code | SLE/LR/14 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Rods for Stand Bases Used For?
The rod is the backbone of every retort stand: bossheads slide onto it and carry clamps, rings and holders at whatever height the experiment needs. Because these rods have no thread, they are made for fittings that grip or seat a plain rod, such as rod sockets, table clamps and frames, and they can be moved between set-ups without screwing or unscrewing anything.
Short rods (500 or 600) keep test-tube and titration work compact, while the 1000 to 1500 lengths give room for distillation columns, long condensers and pendulums. Pick 12 or 13 for general teaching work and 16 when several heavy clamps will share one rod. Stainless steel stays smooth and rust-free, so bossheads grip evenly; wipe off spills and avoid bending a rod by overloading its top end.
What to Specify When Ordering
- The diameter, D/Ø 12, 13 or 16, matched to your base, socket or clamp.
- The length from the listed options for that diameter.
- The quantity of each size.
- The base or fitting the rods will be used with, so we can check the fit.
OEM Manufacturer
These rods are made by Jain Scientific Equipments Private Limited, the company that trades as ScienceLab, which is the OEM (original equipment manufacturer) and produces them at its own licensed factory at Saha, Ambala, Haryana, India. Labs topping up their stock, dealers and importers order the exact lengths and diameters they need direct from the factory.
Mixed orders across several sizes are common, so just list what you need and ask us. See the ScienceLab profile for company details.
Related Stand Bases, Rods and Rings
Fittings that take these rods and parts that go on them:
- Table Clamp For Rods — fixes a D/Ø 12/13 rod to a bench edge.
- Sockets For Rods Without Thread — a fixed seat for an unthreaded rod.
- H-Frame MINI — a small cast iron frame for 8 and 12 mm rods, sold without a rod.
- Bossheads 18/10 Stainless Steel — stainless bossheads to mount clamps on the rod.
All bases and supports are in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What sizes are the Rods For Stand Bases available in?
Rods For Stand Bases come in D/Ø 12 and 13 with lengths of 500, 600, 750, 1000, 1250 and 1500, and in D/Ø 16 with lengths of 1000, 1250 and 1500. That makes fifteen listed sizes in all.
Are the Rods For Stand Bases threaded?
No. Rods For Stand Bases are made without a thread, for sockets, clamps and frames that hold a plain rod. If your base needs a screw-in rod, tell us through the contact page before ordering.
Which rod diameter should I choose?
For Rods For Stand Bases, match the diameter to the base or clamp you already use. D/Ø 12 and 13 suit general teaching set-ups, while 16 is the stiffer choice for long rods carrying several heavy clamps.
What material are the Rods For Stand Bases made from?
Rods For Stand Bases are made from 18/10 stainless steel. It does not rust in normal lab use and keeps a smooth surface, so bossheads can be moved and tightened evenly along the full length of the rod.
Who manufactures the Rods For Stand Bases?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Rods For Stand Bases as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and supplies them factory-direct in India and international markets.
What should I include in a quotation request for rods?
A quotation request for Rods For Stand Bases should list each diameter and length with its quantity, the base or clamp the rods will go into, and the delivery location. The manufacturer will then confirm prices and fit.
Request a Quote
Send your size list through the contact page or the enquiry cart for a quotation straight from the manufacturer.
Last updated: 24 September 2026
