Rubber Pipe For Bunsen Burner Manufacturer,Supplier and Exporter in India

Rubber Pipe For Bunsen Burner (Product Code: SCL-527/013) is neoprene gas tubing with reinforced ends, used to connect a Bunsen burner securely to the gas tap in school and college laboratories. It suits natural gas and LPG burners and comes in 600 mm pre-cut lengths with an 8 mm bore. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, among the chemistry consumables it provides to labs in India and abroad.

Specifications

What Is the Bunsen Burner Rubber Pipe Used For?

Push one reinforced end fully over the gas inlet of the burner and the other over the nozzle of the bench tap, making sure each end grips firmly. Lay the tubing so it does not pass over the flame, the tripod or any hot surface, and check the joints for leaks with a little soap solution before the first lighting of the day. At the end of the practical, close the gas tap first and let the burner go out, rather than pulling the tubing off a live supply.

Tubing ages with use and heat, so it is one of the lab consumables a school should inspect and renew regularly. Look for cracks, hardening, a sticky surface or loose ends before each session, and replace any length that shows these signs. Neoprene outlasts natural rubber tubing, which means fewer changes over a school year, but a regular check remains part of good gas safety.

What to Specify When Ordering

• The number of 600 mm lengths — usually one per burner, plus spares for replacement.
• That the 8 mm bore suits the nozzles on your gas taps and burners.
• Whether your burners run on natural gas or LPG; the tubing suits both.
• Any burners, lighters or tripods to be quoted together with the tubing.

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab from Ambala, Haryana, and supplies this neoprene tubing alongside the burners and heating accessories in its Chemistry Lab range. For vendor registration, the supplying company’s GSTIN is 06AAECJ8618A1ZT, and export orders are handled under Importer-Exporter Code AAECJ8618A issued by the DGFT.

Schools, colleges and dealers in India and international markets can include the tubing on one quotation with their burners. See our company profile for more about the company.

Related Chemistry Lab Equipment

Gas tubing is ordered with the rest of the burner station. These items complete the set-up:

• Bunsen Burner — the burner this tubing feeds
• Bunsen Burner with Stopcock — a burner with its own gas control at the base
• Gas Lighter, Piezo Electric — for lighting the burner without matches
• Tripod Stand 200mm — supports the vessel over the flame
• Gauze Wire — spreads the heat under beakers on the tripod

See the Chemistry Lab category for more burners and heating accessories.

Frequently Asked Questions

Which gas supplies can the Rubber Pipe For Bunsen Burner be used with?
The Rubber Pipe For Bunsen Burner is suitable for both natural gas and LPG burners, so the same neoprene tubing can be used whichever gas supply your laboratory benches are fitted with.

What are the bore and length?
The Rubber Pipe For Bunsen Burner has an 8 mm bore and comes in 600 mm pre-cut lengths. Fit depends on the outer size of your gas tap and burner nozzles, so share those details with us if you are unsure.

Why neoprene rather than natural rubber?
The Rubber Pipe For Bunsen Burner is neoprene tubing, which lasts longer than natural rubber tubing, so each length needs replacing less often over a school year. Inspecting it before use is still part of safe gas practice.

Can I cut a length shorter?
We recommend using each Rubber Pipe For Bunsen Burner length as supplied, because cutting it removes one of the reinforced ends that give the secure connection to the burner or the gas tap.

How often should the tubing be replaced?
There is no fixed interval for the Rubber Pipe For Bunsen Burner. Inspect each length before every session, and replace it as soon as it is cracked, hardened, sticky or loose on the nozzle.

Who supplies the Rubber Pipe For Bunsen Burner?
The Rubber Pipe For Bunsen Burner is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. It can be quoted with burners, lighters and tripods, so a school’s whole gas-burner station comes from one supplier.

Can you supply enough for a whole lab or for export?
Yes. The Rubber Pipe For Bunsen Burner is supplied to schools, colleges and dealers in India and international markets; send the number of lengths and the delivery location through our contact page.

Request a Quote

Count the burners in your lab and send us the number of lengths you need via the contact page. The Rubber Pipe For Bunsen Burner (SCL-527/013) can also be added to the enquiry cart with burners and lighters for a single quotation.

Last updated: 24 September 2026