This Beaker is a 100 ml vessel of clear borosilicate glass with a pouring spout and indelible graduations. It resists heat and chemicals, so biology students use it to mix small batches of stain, warm liquids gently over a spirit lamp, hold a hot-water bath for test tubes and soak tissue samples in test solutions.
| Parameter | Detail |
|---|---|
| Capacity | 100 ml |
| Material | Borosilicate glass |
| Graduations | Indelible |
| Spout | Yes, for controlled pouring |
| Properties | Heat resistant, chemical resistant |
| Colour | Clear |
| Product code | SCL1427/012 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Water bath for food tests. Half fill the beaker with water and stand it on gauze wire over a tripod, above a spirit lamp. Bring the water to the boil gradually, then stand test tubes of food extract and Benedict's reagent in it for the timed heating. Put out the flame and let the beaker cool before moving it.
Osmosis in potato strips. Fill a row of beakers with distilled water and with sucrose solutions of rising strength. Weigh matched potato strips on a digital analytical balance, soak one strip in each beaker, then blot and reweigh them after a set time. Plot the change in mass against sugar strength to find where the tissue neither gains nor loses water.
Making up a small batch of solution. Measure distilled water in a measuring cylinder, pour it into the beaker and dissolve the solid with a glass stirring rod. Pour the finished solution through the spout, down the rod, into a labelled amber dropper bottle for the bench.
Borosilicate glass copes with heating, but a sudden change of temperature still strains it. Heat it gradually on a gauze, never heat it empty, and do not put a hot beaker on a cold, wet bench or plunge it into cold water. Let it cool slowly at room temperature before washing.
Check each beaker against the light before use. Chips, deep scratches and small star cracks weaken the glass, and a damaged beaker can split when it is heated. Take it out of use at once and put it in a box kept for broken glass, not in the ordinary bin.
Keep the liquid well below the brim, about half full or less, when it is to be boiled. That leaves room for bubbling and stirring, so the contents do not boil over onto the flame. For larger volumes, move up to a bigger beaker rather than filling a small one to the top.
Use a conical flask whenever the liquid must be swirled, as in a titration, because its sloping sides and narrow neck keep the liquid in and cut evaporation. A beaker's wide mouth suits other jobs: adding solids, stirring with a rod, standing test tubes in a water bath and pouring.
The spout lets the liquid leave in a controlled stream. For a neater pour, hold a glass rod against the spout and let the liquid run down it. When a watch glass covers the beaker, the spout leaves a small gap for steam to escape, and it gives a stirring rod somewhere to rest.
Choose a beaker that holds well over the volume you need, so there is space to stir and heat. The 100 ml size suits small amounts of stain or test solution, a water bath for a few test tubes, or soaking tissue samples. Bigger batches need a larger beaker.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 15 November 2026