Bend 90º equal fxf GI 4" ND 14 Bar Manufacturer,Supplier and Exporter in India

Bend 90º equal fxf GI 4" ND 14 Bar (Product Code: SLE/WDF/06) is a right-angle galvanised iron pipe bend used to turn a 4-inch threaded water line through 90° in pressurised supply and distribution systems. Both ends are female-threaded (fxf) to the same 4" nominal diameter, so site crews can route mains around corners, walls and tank connections without a change of size. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, together with related water-supply fittings.

Specifications

What Is the 4-Inch GI 90° Bend Used For?

Pipe routes rarely run straight from source to outlet. The Bend 90º equal fxf GI 4" ND 14 Bar lets a 4-inch galvanised main turn a corner — up a wall from a pump, across to an overhead tank or around a building footing — while keeping the same bore on both sides of the turn. Compared with a short elbow, a bend generally sweeps through a gentler curve, which helps water change direction more smoothly in larger lines.

Each end takes a male-threaded 4" GI pipe or a threaded nipple. Seal the male threads with tape or jointing compound, screw each pipe fully home, and set the bend's alignment before the final turn, because a threaded fitting cannot be backed off without loosening the joint. Anchor the pipes close to the turn, where line forces act, and check the finished run against the 14 bar rating during pressure testing.

What to Specify When Ordering

• Quantity of 4" bends for each route or site.
• Confirmation that the line is 4" nominal diameter GI pipe with male-threaded ends.
• Whether a bend or a short elbow suits the space available at each corner.
• Other fittings needed on the same line, such as crosses, nipples or plugs.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab and is known to many buyers as a laboratory equipment exporter from India, also supplies water-supply fittings such as this 4" bend. The company sources the item and handles quotation, packing and dispatch from Ambala, Haryana, so a buyer can combine pipe fittings with other water, sanitation and hygiene supplies in one order. Company background is available on the ScienceLab profile page.

Related Water, Sanitation & Hygiene Supplies

Fittings that are usually planned on the same galvanised line as this bend:

• Cross equal fthd GI 4" ND 14 Bar — a four-way junction in the same size for branching the main before or after the turn.
• Elbow 90º equal fthd GI ND 14 Bar — the tighter-turn alternative where corner space is limited.
• Nipple Taper mthd Hex GI 14 Bar — a male-threaded connector for joining the bend directly to another female fitting; confirm the size with us.
• Cap fthd GI 14 Bar — a female-threaded cap for closing a male pipe end at the end of a run.

Browse all items in the Water, Sanitation & Hygiene Supplies category.

Frequently Asked Questions

Are both ends of the Bend 90º equal fxf GI 4" ND 14 Bar the same?
Yes. Both ends of the Bend 90º equal fxf GI 4" ND 14 Bar are internal (female) threads of the same 4-inch nominal diameter, which is what "fxf" and "equal" mean in the name. Each end accepts a male-threaded 4" GI pipe or nipple.

How is this bend different from a 90° elbow?
The Bend 90º equal fxf GI 4" ND 14 Bar and a 90° elbow both turn a line through a right angle, but a bend generally follows a longer, gentler curve while an elbow is more compact. Choose the bend where there is room and the elbow where space is tight.

What pressure can the 4" GI bend handle?
The Bend 90º equal fxf GI 4" ND 14 Bar is rated for 14 bar (200 lb per square inch). Size pumps and set test pressures so the line stays within this rating, and make sure every other fitting on the line meets it as well.

What material and finish does the bend have?
The Bend 90º equal fxf GI 4" ND 14 Bar is malleable cast iron, hot-dip galvanised to protect it against corrosion in water service. Threading is done after galvanising, leaving clean threads that engage GI pipe without scraping through built-up zinc.

Who supplies the Bend 90º equal fxf GI 4" ND 14 Bar?
ScienceLab, the trading name of Jain Scientific Equipments Pvt Ltd in Ambala, Haryana, supplies the Bend 90º equal fxf GI 4" ND 14 Bar. It sources the fitting and quotes it with other water-supply items for projects in India and international markets.

How do I get a price for a quantity of these bends?
To price the Bend 90º equal fxf GI 4" ND 14 Bar, send the quantity, delivery location and any other fittings on your list through the contact page. A quotation is then prepared for the complete order, including bulk or export quantities.

Request a Quote

Send your requirement for the Bend 90º equal fxf GI 4" ND 14 Bar through the ScienceLab contact page with quantity and destination, or place it in the enquiry cart while you browse the other GI fittings. One enquiry can cover every fitting on your pipe schedule.

Last updated: 24 September 2026