- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Elbow 90º equal fthd GI ND 14 Bar
Elbow 90º equal fthd GI ND 14 Bar (Product Code: SLE/WDF/07) is a compact galvanised iron elbow used to make a tight right-angle turn in 4-inch threaded water pipework in pumping, storage and distribution installations. Its two equal outlets carry internal parallel threads of 4" nominal diameter and the fitting is rated for 14 bar, which suits plumbers working in confined pump rooms and valve chambers. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | 90° equal elbow socket, female both ends |
| Nominal diameter | 4" (the size is not shown in the product name) |
| Thread | Internal female parallel thread |
| Material | Malleable cast iron |
| Finish | Hot-dip galvanised; threaded after galvanising |
| Pressure rating | 14 bar (200 lb/sq inch) |
| For use with | Galvanised iron water pipes |
| Product code | SLE/WDF/07 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the GI 90° Equal Elbow Used For?
An elbow is the fitting of choice where a 4-inch galvanised line has to change direction in a small footprint — at a pump outlet, where a riser leaves the floor, inside a valve pit or where pipes hug a wall. The Elbow 90º equal fthd GI ND 14 Bar turns the flow through a right angle within a short body, so the pipe can sit close to the surface it follows.
Its internal parallel threads receive male-threaded 4" GI pipe or nipples. With a parallel female thread the seal depends on careful thread preparation, so apply thread-sealing tape or jointing compound to the male thread and tighten evenly. Sharp turns add more flow resistance than a long bend, so on long pumped mains use bends where space allows and keep elbows for the tight spots.
What to Specify When Ordering
- The 4" size — the product name does not state it, so write "4 inch nominal diameter" in your enquiry.
- The quantity needed for each site or installation.
- Your system pressure, to confirm it stays within the 14 bar rating.
- Whether any corners would be better served by a longer bend.
Supplier
Buyers who know ScienceLab as a laboratory equipment supplier in India may not expect pipe fittings, but the company — the trading name of Jain Scientific Equipments Private Limited, Ambala — also supplies water, sanitation and hygiene items for institutional and project use. This elbow is sourced by the company and then quoted, packed and dispatched with the rest of an order. For more about the business, see the company profile.
Related Water, Sanitation & Hygiene Supplies
Items that work with this elbow on a 4" GI line or at a plastic-to-GI transition:
- Bend 90º equal fxf GI 4" ND 14 Bar — the gentler-curve alternative in the same size where there is room.
- Cross equal fthd GI 4" ND 14 Bar — a four-way junction for branching a 4" GI main.
- Adaptor PP Comp, HDPE 110mmxmthd GI. 4"O/ND-P — its male GI thread lets an HDPE pipe screw straight into the elbow's female outlet.
- Elbow PP Comp, HDPE 110mmxfthd 4" O/ND-P — a plastic elbow to use when the turn itself is the HDPE-to-GI change-over.
More fittings are listed in the Water, Sanitation & Hygiene Supplies category.
Frequently Asked Questions
What size is the Elbow 90º equal fthd GI ND 14 Bar?
The Elbow 90º equal fthd GI ND 14 Bar is 4-inch nominal diameter on both outlets, according to its specification, even though the size is not written in the product name. Mention "4 inch" when you enquire so the quotation matches your pipework.
What type of thread does the elbow have?
The Elbow 90º equal fthd GI ND 14 Bar has internal female parallel threads on both ends. It accepts male-threaded 4" GI pipe or nipples; seal the male threads with tape or jointing compound so the joint stays watertight under pressure.
What pressure is the 4" GI elbow rated for?
The Elbow 90º equal fthd GI ND 14 Bar carries a pressure rating of 14 bar, equal to 200 lb per square inch. Check your pump's delivery pressure and the line test pressure against this rating before installation.
Should I choose this elbow or a bend?
Choose the Elbow 90º equal fthd GI ND 14 Bar where space is tight, because its body turns the flow in a short distance. Where there is room, a 90° bend of the same size generally gives a smoother turn and less flow resistance on long mains.
Who supplies the Elbow 90º equal fthd GI ND 14 Bar?
Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana supplies the Elbow 90º equal fthd GI ND 14 Bar. The company sources it and can include it in one quotation with other GI fittings and water-supply items for buyers in India and international markets.
Can the elbow be quoted for an export project?
Yes, the Elbow 90º equal fthd GI ND 14 Bar can be quoted for export as well as domestic delivery. Share the quantity, destination and full fitting list through the contact page, and the quotation will cover the complete requirement.
Request a Quote
Ready to order? List the Elbow 90º equal fthd GI ND 14 Bar with its quantity on the contact form, or save it in the enquiry cart and send your whole list at once. Remember to state the 4" size in your message.
Last updated: 24 September 2026
