- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Cap, female PVC, scj, 110mm OD-P
Cap, female PVC, scj, 110mm OD-P (Product Code: SLE/WDF/20) is a uPVC end cap used to seal the open end of a 110 mm outside-diameter PVC pipe in pressurised water-supply lines. Contractors, WASH programmes and campus maintenance teams fit it wherever a run must stop, for example during a school lab renovation or a new water main; its female socket is solvent-cemented over the pipe and it is rated 10 bar at 20°C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Cap, female socket (end closure) |
| Joint | Solvent cement joint (scj) |
| Pipe outside diameter | 110 mm |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/20 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110mm PVC End Cap Used For?
An end cap is the full stop of a pipeline. On a 110 mm uPVC main it closes the far end of a distribution line, blanks off a stub left for a later connection, or seals a finished section so it can be filled and checked before the rest of the network is joined. Because the socket is solvent-welded, the closure is permanent: to extend the line later, the pipe is cut behind the cap and a new fitting is cemented on.
For a sound joint, cut the pipe square, remove burrs, clean both surfaces, apply solvent cement to the pipe end and the socket, push the cap fully home and hold it briefly. Let the joint cure as the cement maker directs before pressurising, and keep the working pressure within the 10 bar at 20°C rating, remembering that PVC carries less pressure as water temperature rises towards the 50°C limit.
What to Specify When Ordering
- Pipe size: this cap suits pipe of 110 mm outside diameter only.
- Joint system: confirm your pipe is solvent-cement uPVC, not a rubber-ring or HDPE compression line.
- Quantity: one cap for every dead end or reserved stub on the drawing.
- Companion fittings: list any 110 mm couplers, tees or unions needed in the same order.
Supplier
Jain Scientific Equipments Private Limited trades as ScienceLab and supplies this 110 mm uPVC end cap from Ambala, Haryana. Alongside its laboratory ranges, the company sources water-supply fittings so that schools, NGOs, contractors and importers can place one consolidated order with a single laboratory equipment supplier in India. Company background is on the ScienceLab profile page.
Related Water, Sanitation & Hygiene Supplies
These fittings from the same 110 mm uPVC series are often ordered with the end cap:
- Coupler Straight/Equal PVC, skt, scj, 110mm-P — joins two pipe lengths on the run leading to the capped end.
- Union Equal PVC, fxf, scj 10Bar 110mm OD-P — fitted upstream of the cap when the line may need to be opened later.
- Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P — takes a 90 mm branch off the same main before it ends.
- Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P — branches the 110 mm line to threaded G.I. pipework.
See the full range of pipe fittings, pumps and hygiene items in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What pipe size does the Cap, female PVC, scj, 110mm OD-P fit?
The Cap, female PVC, scj, 110mm OD-P fits PVC pipe with a 110 mm outside diameter. Its female socket slides over the pipe end and is fixed with solvent cement, so the pipe OD must match exactly; for other sizes, ask us through the contact page.
What pressure and temperature is the 110mm PVC end cap rated for?
The 110mm PVC end cap (Cap, female PVC, scj, 110mm OD-P) is rated 10 bar at 20°C and suits water between 0 and 50°C. Allowable pressure is lower at warmer temperatures, so the system designer should confirm the working pressure for the actual water temperature.
Can the 110mm PVC end cap be removed and reused?
No. The 110mm PVC end cap is solvent-welded, so the joint is permanent. To extend the line, cut the pipe behind the cap and cement on a new fitting such as a straight coupler; if reopening is expected, fit a union upstream instead.
Can the Cap, female PVC, scj, 110mm OD-P be used on drinking-water lines?
Drinking-water suitability of the Cap, female PVC, scj, 110mm OD-P should be confirmed with us for your application before you order. Describe the line and what it will carry through the contact page, and ask what information is available for the batch you are quoted.
Who supplies the Cap, female PVC, scj, 110mm OD-P?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Cap, female PVC, scj, 110mm OD-P, sourcing it for schools, WASH projects, contractors and dealers in India and international markets together with its laboratory and hygiene ranges.
What should a quotation request for the 110mm PVC cap include?
A quotation request for the 110mm PVC cap should give the product code SLE/WDF/20, the quantity, the delivery location and any other 110 mm fittings needed, so ScienceLab can price the whole pipe order in one reply.
Request a Quote
Send your quantity and delivery details through the ScienceLab contact page, or add this cap to the enquiry cart with the other fittings you need and request one combined quotation.
Last updated: 24 September 2026
