- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P
Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P (Product Code: SLE/WDF/25) is a uPVC reducing tee used to split a PVC water line into a branch of a different size, for pipes of 110 mm and 90 mm outside diameter. Network planners use it where a sub-main leaves the main supply at a smaller bore; every end is a female socket joined by solvent cement, rated 10 bar at 20°C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Tee, reducing |
| Ends | Female on all ends (fxf) |
| Joint | Solvent cement jointing |
| Pipe outside diameters | 110 x 90 mm |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/25 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110 x 90mm PVC Reducing Tee Used For?
In a distribution network the flow shrinks as water is drawn off, so branch lines are often a size smaller than the main. A reducing tee makes that step at the junction itself, which avoids adding a separate equal tee and reducer and cuts the number of joints. Typical uses are feeding a school block, a hostel or a group of stand posts from a 110 mm supply.
A reducing tee normally carries the larger size on the straight run and the smaller size on the branch; check the fitting on receipt and plan the layout accordingly. Solvent-cement each socket after cleaning and deburring, and anchor the branch near the tee so pipe movement does not load the junction. Keep pressures within 10 bar at 20°C.
What to Specify When Ordering
- Sizes: 110 mm and 90 mm outside-diameter uPVC pipe.
- Configuration: tell us which size your run and branch need so we can confirm the fitting matches.
- Quantity: one tee per branch take-off on the network plan.
- Matching items: 110 mm and 90 mm couplers, reducers or unions for the same job.
Supplier
This reducing tee is supplied by Jain Scientific Equipments Private Limited, trading as ScienceLab, from Ambala, Haryana. The company sources pipe fittings for water-supply and sanitation work so that institutions and contractors can combine them with laboratory purchases. For vendor registration, the supplying company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. See the ScienceLab profile for more.
Related Water, Sanitation & Hygiene Supplies
Fittings used alongside a 110 x 90 mm branch junction:
- Reducing Coupler PVC skt scj 110x90mm-P — steps the same sizes down in a straight line with no branch.
- Coupler Reducing PP Comp, HDPE 110x90mm OD-P — the equivalent reduction for HDPE pipe with compression joints.
- Union Equal PVC, fxf, scj 10Bar 110mm OD-P — adds a removable joint on the 110 mm main.
- Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P — a tee whose branch connects to threaded G.I. pipe.
Browse the full Water, Sanitation & Hygiene Supplies range for more fittings.
Frequently Asked Questions
What pipe sizes does the Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P join?
The Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P joins uPVC pipes of 110 mm and 90 mm outside diameter. All ends are female sockets fixed with solvent cement; tell us your run and branch sizes so we can confirm the configuration.
Why use the 110 x 90mm PVC reducing tee instead of an equal tee?
The 110 x 90mm PVC reducing tee branches and reduces in one fitting, so a separate reducer is not needed. Fewer joints mean less cementing work and fewer possible leak points on the network.
What is the pressure rating of the 110 x 90mm PVC reducing tee?
The 110 x 90mm PVC reducing tee is rated 10 bar at 20°C and is suitable for water from 0 to 50°C. Because PVC loses pressure capacity as temperature rises, confirm the design pressure for the actual water temperature.
Is the Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P for drinking water?
Ask us to confirm drinking-water suitability of the Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P for your network before ordering. Where a tender or project needs this point answered in writing, raise it through the contact page when you request the quotation.
Who supplies the 110 x 90mm PVC reducing tee?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110 x 90mm PVC reducing tee to schools, WASH programmes, contractors and importers in India and international markets, together with other PVC fittings.
Request a Quote
Send the quantity of product code SLE/WDF/25 and your delivery location via the contact page, or add the tee to the enquiry cart with the other items on your network bill of materials.
Last updated: 24 September 2026
