Glassware Beaker

Glass Beaker (Product Code: SLE/GB/01) is a graduated laboratory beaker made of borosilicate glass, offered in nine capacities from 50 ml to 2000 ml. It is heat resistant and chemical resistant, can be heated directly in an open flame, and withstands the heating and cooling cycles common in chemistry work. Schools, colleges, research and quality-control laboratories use it every day for mixing, dissolving, heating and holding liquids. This borosilicate glassware is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

In school and college practicals the beaker is the everyday vessel for preparing solutions, dissolving salts, warming liquids, running simple reactions and collecting filtrate. Smaller sizes such as 50 ml and 100 ml suit student benches and small-scale reactions, while the 1000 ml and 2000 ml sizes serve as water baths, stock containers or preparation vessels for a whole class. The graduations give a quick guide to volume while filling; for exact measurement, transfer the liquid to a measuring cylinder or volumetric flask.

Because the glass is heat and chemical resistant, the beaker handles most routine chemistry lab glassware tasks, from boiling water to holding dilute acids and alkalis. Good practice still matters: heat gradually, never heat an empty beaker, stir with a glass rod rather than a metal spatula, and lift hot beakers with tongs. Many teachers also place the beaker on a wire gauze over the burner to spread the flame evenly. Inspect each beaker for chips or star cracks before heating and set aside any damaged piece.

Manufacturer

Jain Scientific Equipments Private Limited, the company behind the ScienceLab brand, manufactures laboratory glassware and teaching apparatus in Ambala, Haryana. Its glass beakers go to schools, colleges, laboratories and distributors across India and international markets. Learn more about the company on our profile page.

Related Laboratory Equipment

These items are commonly used with the Glass Beaker in heating and solution work:

• Beaker Tong — for lifting hot beakers safely off the flame.
• Gauze Wire — spreads burner heat evenly under the beaker.
• Stirring Rod, Glass — mixes solutions without scratching the beaker.
• Glass Measuring Cylinder — for measuring volumes more precisely before pouring into the beaker.
• Beaker Brush — for cleaning residue from the inside walls after use.

See every beaker and accessory in our Glassware Beaker category.

Frequently Asked Questions

Which capacities are available?
50 ml, 100 ml, 150 ml, 250 ml, 400 ml, 500 ml, 600 ml, 1000 ml and 2000 ml. State the sizes and quantities you need when you enquire.

Can the beaker be heated over a Bunsen burner?
Yes. It is made of heat-resistant borosilicate glass that can be heated directly in an open flame. Heat gradually and never heat it empty.

Are the graduations accurate enough for measuring?
Beaker graduations are intended as an approximate guide. Use a measuring cylinder, pipette or volumetric flask when an exact volume matters.

Is a calibration certificate available?
If your laboratory needs documentation of volume accuracy, please discuss the requirement with us through the contact page before ordering.

How should the beakers be cleaned?
Rinse promptly after use, scrub with a soft beaker brush and mild laboratory detergent, and rinse with distilled water. Avoid abrasive powders that can scratch the glass.

Do you offer a tall form or a ready-made set?
Yes, we also list a Tall Form Beaker and a Glass Beaker Set of 5 for schools that prefer a pre-assembled set.

Can you supply beakers in bulk or for export?
Yes. ScienceLab supplies glassware in quantity to institutions and distributors in India and international markets; share your size-wise quantities and delivery location.

Request a Quote

Request a size-wise quotation for Glass Beakers through our contact page, or add them to the enquiry cart with the rest of your glassware list.

Last updated: 24 September 2026

Glass Beaker Set of 5 (Product Code: SLE/GB/02) brings together five graduated borosilicate glass beakers spanning 50 ml to 1000 ml, so a student bench or teaching lab gets a small vessel for dissolving a sample and a large one for a hot-water bath or bulk solution in a single order. Beakers are the everyday containers for mixing and heating, and this is a practical beaker set for school labs in India as well as college practicals and general prep rooms. The set is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

In a routine chemistry practical the smaller beakers hold weighed solids while they dissolve or collect a filtrate, while the 1000 ml beaker works as a water bath for warming test tubes or as the container for a stock solution. Because borosilicate glass copes with the swing from heating to cooling, the same beaker can go from the burner to the bench for crystallisation without being swapped for another vessel. Schools building up their borosilicate glassware in India often start with a set like this because it covers most bench tasks with one purchase.

For even heating, stand the beaker on a wire gauze over a tripod rather than in the bare flame tip, heat gradually and never heat a beaker empty. Lift hot beakers with tongs, and treat the graduations as a guide only — when an exact volume matters, measure it in a cylinder or pipette first.

Manufacturer

The Glass Beaker Set of 5 is produced by Jain Scientific Equipments Private Limited, the Ambala, Haryana company behind the ScienceLab brand. Incorporated under CIN U29309HR2020PTC087597, the company manufactures at its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414). More background is available in our company profile.

Related Laboratory Equipment

Items usually set out on the same bench when these beakers are heated, handled and cleaned:

• Glass Beaker — single borosilicate beakers to replace or add one particular size
• Bunsen Burner — the flame source for direct heating
• Gauze Wire — spreads the flame under the beaker when it sits on a tripod
• Beaker Tong — lifts the larger hot beakers from the set safely
• Beaker Brush — scrubs dried residue from beaker walls after the practical

See the full Glassware Beaker range for single beakers, plastic options and handling accessories.

Frequently Asked Questions

What sizes are in the set?
Five beakers ranging from 50 ml to 1000 ml. If you need a specific combination of intermediate sizes, contact us and we will confirm the set make-up on the quotation.

Can these beakers be heated directly over a Bunsen flame?
Yes. They are made of borosilicate glass that can be heated directly in an open flame. Heating gradually, ideally on a wire gauze, and never heating a beaker dry will extend its life.

Are the graduations accurate enough for volumetric work?
No. Beaker graduations give an approximate volume for mixing and dilution; use a measuring cylinder, pipette or burette when an accurate volume is required.

Why choose a set instead of individual beakers?
A set equips a bench with a spread of sizes in one order. If you only need extra units of one size, the Glass Beaker page lists single beakers.

Is a calibration certificate available?
These are general-purpose beakers rather than volumetric glassware. If your purchase requires any documentation, please discuss it with us through the contact page before ordering.

Can schools order many sets, including for export?
Yes. We supply schools, colleges and distributors in India and international markets; share the number of sets and the delivery location and we will quote accordingly.

Request a Quote

To price this beaker set for your lab, contact us or add it to your enquiry cart with the quantity you need.

Last updated: 24 September 2026

Pyrex Beaker, Low Form (Product Code: SLE/GB/03) is a Griffin-pattern low-form beaker in low-expansion Pyrex glass, offered from a compact 30 ml size up to 4000 ml. It can be heated directly in an open flame, and its single metric scale in white enamel plus an extra-large marking spot make it a routine vessel for mixing, heating and cooling in professional, college and school laboratories. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, within its chemistry lab glassware range for India and international markets.

Specifications

Typical Use

With eleven capacities to choose from, a lab can match the beaker to the job: the 30 ml and 50 ml sizes for small reagent portions or indicator solutions, the middle sizes for dissolving, neutralising and warming samples, and the 2000 ml to 4000 ml beakers for making up larger batches of solution or holding a cooling bath. The low, wide shape sits steadily on a gauze, hot plate or bench and leaves room to stir.

The extra-large marking spot takes pencil or marker, so several beakers of similar-looking solutions on one bench are not confused — handy during titration preparation or salt analysis sessions in chemistry lab equipment setups for schools in India. Because the enamel graduations are approximate, measure volumes in a cylinder or pipette first and use the beaker scale only as a quick visual check.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies this Pyrex low-form beaker together with the laboratory apparatus it manufactures, so institutions can combine glassware and equipment in a single enquiry. Company background is on our profile page.

Related Laboratory Equipment

Other items that pair with low-form beakers during heating and measuring work:

• Pyrex Beaker Set of 5 — the same Pyrex glass in a ready-made set
• Tall Form Beaker — a taller, narrower alternative where splashing or electrode immersion matters
• Glass Measuring Cylinder — measures volumes more precisely than beaker graduations allow
• Gauze Wire, Ceramic Centre — spreads burner heat evenly under the beaker
• Beaker Tong — grips a hot beaker for moving or pouring

Browse the Glassware Beaker category for glass and polypropylene beakers, sets and accessories.

Frequently Asked Questions

Which capacities can I order?
Eleven sizes: 30, 50, 100, 150, 250, 400, 600, 1000, 2000, 3000 and 4000 ml. Mention each size and quantity in your enquiry.

What does low form mean?
A low-form (Griffin) beaker is wider and shorter than a tall-form beaker of similar capacity, which gives a stable base and easy access for stirring. If you need a deeper vessel, compare our Tall Form Beaker.

Can I rely on the scale to measure volumes?
No. The white enamel graduations are approximate and not intended for accurate liquid measurement; use volumetric glassware for exact quantities.

What is the marking spot for?
It is a writable area for a sample number, reagent name or student group, so beakers can be identified without separate labels.

My tender names a particular glass brand or grade. Can you confirm it?
Yes — send the exact specification through our contact page and we will confirm what we can supply before you place the order.

What should an institutional enquiry include?
List the capacities and quantities, the delivery location in India or abroad, and any documentation your purchase process requires; we then reply with a formal quotation.

Request a Quote

For prices on one or more capacities, contact us or place the beaker in your enquiry cart.

Last updated: 24 September 2026

Pyrex Beaker Set of 5 (Product Code: SLE/GB/04) groups five Pyrex glass beakers into one pack for general laboratory work such as mixing, heating and cooling solutions. Every beaker carries a single metric scale printed in white enamel and an extra-large marking spot, so the set is easy to label and read at a glance on a busy practical bench. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, to schools, colleges and lab stores that want a lab glassware supplier in India able to combine glass and apparatus in one order.

Key Details

Typical Use

A five-beaker pack works well as a starter kit for a new practical bench or as a replacement pack when individual beakers break over a term. In a single experiment a teacher can assign one beaker to each stage — dissolving a solid, heating the solution, cooling it for crystals, holding rinse water and collecting waste — and write the stage on each marking spot so students do not mix them up. This makes the set useful chemistry lab equipment for school labs in India where several groups share the same bench.

Heat the beakers gradually on a hot plate or on a gauze over a burner, and let hot glass cool before washing it in cold water. Since the enamel scale is only approximate, measure reagents with a cylinder or pipette and use the beaker markings as a rough level guide.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, which supplies this Pyrex beaker set as part of a wider glassware and apparatus offer for teaching and testing laboratories. Read more on our company profile.

Related Laboratory Equipment

Useful additions when the set is used for heating and preparing solutions:

• Pyrex Beaker, Low Form — individual Pyrex beakers when you need one specific capacity
• Glass Beaker Set of 5 — a borosilicate glass set as an alternative
• Hot Plate General Purpose — flameless heating for the beakers
• Glass Measuring Cylinder — for accurate volumes before transferring to a beaker
• Brush, Beaker, Nylon — for cleaning the beakers after use

More beakers and handling accessories are listed in the Glassware Beaker category.

Frequently Asked Questions

Which sizes come in the set?
The individual capacities are not listed on this page. Contact us and we will confirm the five sizes before you order; single sizes are also available from the Pyrex Beaker, Low Form range.

Can the beakers be heated?
Yes, the Pyrex glass is heat resistant. Warm them gradually on a hot plate or gauze and avoid sudden temperature changes such as placing hot glass on a wet surface.

How precise are the graduations?
They are approximate and not meant for accurate liquid measurement; they help you judge fill levels while mixing or heating.

How do I label the beakers?
Each has an extra-large marking spot that accepts pencil or marker, so sample names or group numbers can be written directly on the glass.

Is a calibration certificate offered?
These are general-purpose beakers with approximate scales. If your order needs documentation of any kind, raise it with us via the contact page first.

Can you supply sets in bulk to schools or overseas buyers?
Yes, we handle orders for schools, colleges and distributors in India and international markets — tell us the number of sets and the delivery destination.

Request a Quote

For current pricing, send us your requirement or add the set to your enquiry cart.

Last updated: 24 September 2026

Beaker, Polypropylene (Product Code: SLE/GB/05) is a lightweight plastic beaker with a pouring spout and marked graduations, made in six sizes from 50 ml to 2000 ml. It handles hot liquids — though never an open flame — and is a much lower-cost option than glass, which makes it a sensible choice for classrooms, field work and routine lab chores where breakage is a worry. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as part of the range it offers as a lab plastic ware supplier in India.

Specifications

Typical Use

Polypropylene beakers earn their place wherever glass would be at risk: middle-school practicals where younger students carry solutions between benches, collecting rinse water at a sink, preparing salt or sugar solutions for demonstrations, or holding water for floating-and-sinking and density activities. Hot water can be poured in straight from a kettle or a glass beaker, so they also serve as warm-water containers for dissolving experiments. For schools stocking school chemistry lab equipment in India on a tight budget, a few sizes of plastic beaker cover many non-heating tasks.

Keep them well away from burners and do not heat them directly; when a solution must be boiled, do it in glass and let it cool slightly before transferring. The spout helps pour cleanly into a funnel or cylinder.

Manufacturer

ScienceLab is the brand name used by Jain Scientific Equipments Private Limited of Ambala, Haryana, which makes this polypropylene beaker together with a broad catalogue of plastic and glass labware for teaching and testing labs. Background on the company is in our company profile.

Related Laboratory Equipment

Plasticware and tools that work alongside these beakers:

• Plastic Beaker Set of 5 — several polypropylene sizes packed together
• Beaker, Polypropylene, Set of 4 — another ready-made plastic beaker set
• Measuring Cylinder, Polypropylene — measures volumes more exactly before mixing in the beaker
• Stirring Rod, Polypropylene — stirs without scratching the plastic
• Pitcher, Polypropylene, 500 ml — a handled vessel for pouring into several beakers

The Glassware Beaker category lists glass and plastic beakers side by side.

Frequently Asked Questions

Can I put this beaker on a burner or hot plate?
No. Polypropylene beakers can hold hot liquids but must not be used in an open flame, and we do not recommend direct heating on a hot plate either. Choose a glass beaker for heating.

Which sizes are available?
Six capacities: 50, 100, 250, 500, 1000 and 2000 ml. Tell us the mix of sizes you need when you enquire.

What graduation steps do the beakers have?
The beaker described in our listing is marked in 10 ml graduations and measures about 6 cm tall by 5 cm across. Graduation steps and dimensions for the larger sizes can be confirmed through our contact page.

Why choose plastic instead of glass?
Polypropylene is much less expensive than glass, lighter to handle and less likely to break if knocked over, which suits classrooms and field use where no heating is needed.

How should the beakers be cleaned?
Wash with warm water and a mild laboratory detergent using a soft brush, then rinse; avoid abrasive pads that scratch the surface and make the graduations harder to read.

Do you take bulk orders from institutions and distributors?
Yes. We quote for schools, colleges and distributors in India and international markets; include the sizes, quantities and delivery location in your request.

Request a Quote

Ask for a price on any size via our contact form, or collect several items in the enquiry cart and send them together.

Last updated: 24 September 2026

Plastic Beaker Set of 5 (Product Code: SLE/GB/06) is a group of five spouted polypropylene beakers in different sizes, running from 50 ml up to 1000 ml. The set is meant for mixing and holding solutions, including hot liquids, in places where glass is a liability — junior science classes, outreach demonstrations or shared preparation areas. Made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it is a low-risk addition to any junior science lab equipment list.

Specifications

Typical Use

Teachers use a graded plastic set for activities where students mix, observe and compare rather than heat: dissolving salt or sugar in cold versus warm water, watching colour changes when an indicator is added to household liquids, building simple density layers, or sorting soluble and insoluble substances. Because every size is shatter-resistant plastic, the set can travel to a classroom trolley or a science fair table without the packing that glass needs.

When a practical needs warm water, heat it in a glass vessel first and then pour it into the polypropylene beaker, since the set must not go over a flame or onto a hot plate. Use a measuring cylinder when quantities matter, as the beaker markings only give an approximate level.

Manufacturer

Jain Scientific Equipments Private Limited manufactures this plastic beaker set in Ambala, Haryana, and sells it under its ScienceLab trade name to schools, colleges and distributors. Visit the company profile to learn how the business is organised.

Related Laboratory Equipment

Pair the set with these items for complete non-heating practicals:

• Beaker, Polypropylene — single polypropylene beakers, including a larger size than the set offers
• Glass Beaker Set of 5 — the borosilicate glass set for experiments that need a flame
• Stirring Rod, Polypropylene — stirring without scratching the beakers
• Wash Bottle LDPE with Narrow Mouth — rinsing beakers and topping up with distilled water
• Measuring Cylinder Set of 5 — measuring liquids accurately before they go into the beakers

Explore more options in the Glassware Beaker category.

Frequently Asked Questions

Which capacities make up the set?
Five sizes between 50 ml and 1000 ml. The exact intermediate capacities are confirmed on the quotation; ask us if your syllabus needs particular sizes.

Can the beakers be heated?
No. They can hold hot liquids, but they must not be used over an open flame or on an electric hot plate. Heat liquids in glass and pour them in afterwards.

Are the scales precise?
No — the graduations are approximate and not intended for accurate liquid measurement.

Is the set suitable for younger students?
Yes. Polypropylene is light and far less likely to break than glass, which is why plastic beakers are popular for primary and middle-school activities that involve no heating.

Which liquids can I use in them?
The beakers are chemical resistant and suit common aqueous solutions used in school practicals. For strong solvents or unusual reagents, check compatibility with us before use.

What warranty applies?
Warranty and replacement terms are stated with each quotation; please contact us for the current terms.

Can you supply class sets in quantity?
Yes. We supply schools, colleges and distributors in India and international markets; share the number of sets needed and the delivery address.

Request a Quote

For a price on class quantities, contact us or use the enquiry cart to list everything your lab needs.

Last updated: 24 September 2026

Pitcher, Polypropylene, 500 ml (Product Code: SLE/GB/07) looks much like a beaker but adds a sturdy handle and a larger spout, so liquids can be poured one-handed with better control. It is graduated every 25 ml from 25 to 500 ml, stands approximately 11 cm tall with a diameter of about 9 cm, and copes with hot liquids as long as it is kept out of an open flame. Made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it is one of the everyday prep-room items that a school lab equipment supplier in India is asked for when benches are being stocked.

Specifications

Typical Use

A 500 ml pitcher is the natural tool for handing out measured portions at the start of a practical: a lab assistant can fill it with distilled water or a diluted reagent and pour a set portion into each group's beaker, reading the 25 ml marks on the way. It is equally handy for topping up a water bath, refilling wash bottles through a funnel or carrying warm water from a kettle to the bench for dissolving experiments.

The handle keeps fingers away from hot contents, and the wide spout reduces drips down the side. Treat the scale as a dispensing guide; transfer to a measuring cylinder when a precise volume is required, and keep the pitcher away from burners and hot plates.

Manufacturer

This pitcher comes from Jain Scientific Equipments Private Limited — known to customers as ScienceLab — an Ambala, Haryana maker of laboratory apparatus for education and industry. Read our profile page for details of the company.

Related Laboratory Equipment

Items commonly used with a lab pitcher when dispensing and transferring liquids:

• Pitcher, Polypropylene, 2000 ml — the larger pitcher for bulk quantities
• Beaker, Polypropylene — receiving vessels for the portions you pour out
• Measuring Jug, Polypropylene — an alternative handled jug for measuring liquids
• Measuring Cylinder, Polypropylene — for volumes that need more precision than pitcher marks
• Plastic Funnel — pouring into narrow-neck bottles without spills

Find more beakers and pitchers in the Glassware Beaker category.

Frequently Asked Questions

How is a pitcher different from a beaker?
It has a similar body but adds a sturdy handle and a larger spout, which make pouring easier and safer, especially with warm liquids.

How finely is it graduated?
In 25 ml steps from 25 to 500 ml — suitable for dispensing portions. Use a measuring cylinder for exact volumes.

Can it hold hot water?
Yes, polypropylene pitchers handle hot liquids, but they must not be placed in an open flame or heated directly.

How big is it?
About 11 cm tall and 9 cm in diameter, compact enough to store on a reagent shelf or in a sink-side rack.

Can it be autoclaved?
Autoclave suitability is not stated for this pitcher, so please contact us before using it for sterilised work.

What details do you need for a school or college quotation?
The quantity, delivery location in India or abroad, and any other labware you want quoted at the same time; we will reply with a consolidated quote.

Request a Quote

To order the 500 ml pitcher, contact our team or add it to the enquiry cart along with other items.

Last updated: 24 September 2026

Pitcher, Polypropylene, 2000 ml (Product Code: SLE/GB/08) is the large member of our lab pitcher range: a two-litre polypropylene vessel shaped like a beaker, with a sturdy handle, a large pouring spout and graduations every 50 ml from 50 to 2000 ml. At roughly 17 cm tall and 14 cm across it carries enough liquid to fill several wash bottles or a small water bath in one trip, and it tolerates hot liquids provided it never meets an open flame. Manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it suits chemistry prep rooms, biology labs and technical institutes looking for practical lab equipment for college use in India.

Specifications

Typical Use

The two-litre size is built for volume jobs: carrying distilled water from a still or carboy to the benches, making up a large batch of dilute solution that will later be divided among groups, filling aspirator bottles, or collecting used rinse water so it can be disposed of properly rather than poured at each bench. Technicians preparing media, buffers or cleaning solutions for a full class find one large pitcher quicker than several trips with small beakers.

A full pitcher is heavy, so hold it by the handle and steady the base with the other hand when pouring into a funnel. The 50 ml marks are meant for convenient dispensing; for solutions that need an exact concentration, measure the components in a cylinder or volumetric flask.

Manufacturer

Production of this pitcher is handled by Jain Scientific Equipments Private Limited, which operates in Ambala, Haryana under the ScienceLab name and ships labware across India and to international markets. See the company profile for more.

Related Laboratory Equipment

Storage and transfer items that fit the same bulk-handling routine:

• Pitcher, Polypropylene, 500 ml — the smaller pitcher for bench-level portions
• Aspirator Bottles — polypropylene storage bottles with a spigot to fill from the pitcher
• Carboy With Stop Cock — bulk water storage to draw from
• Plastic Funnel — guides the pour into bottles and flasks
• Measuring Jug, Polypropylene, Set of 4 — handled jugs in several sizes as an alternative

The Glassware Beaker category has further beakers and pitchers.

Frequently Asked Questions

What graduation interval does it have?
Marks run every 50 ml from 50 to 2000 ml, giving a quick visual read of fill level while pouring.

Should I choose this size or the smaller pitcher?
Pick the 2000 ml size for bulk transfer and batch preparation, and the smaller polypropylene pitcher for bench-level portions with finer markings. Many prep rooms keep both.

Can I pour boiling water into it?
It is designed to handle hot liquids, but it must never be heated in an open flame. Heat water separately and pour it in.

How much shelf space does it need?
Allow for a vessel about 17 cm tall and 14 cm in diameter, plus the handle.

Can I store solutions in it long term?
It is an open pouring vessel, so for storage transfer the solution to a closed, labelled bottle such as an aspirator or reagent bottle.

Is a warranty provided?
Terms are confirmed with each quotation — please contact us for current details.

Do you ship to institutions outside India?
Yes. We supply schools, colleges and distributors in India and international markets; include the destination and quantity in your enquiry.

Request a Quote

For pricing on the 2000 ml pitcher, get in touch or add it to your enquiry cart.

Last updated: 24 September 2026

Crucible & Beaker Tongs (Product Code: SLE/GB/09) are 8 inch nickel plated steel tongs for picking up a hot crucible, evaporating dishes, flasks and small beakers during heating experiments. They keep fingers clear of the flame and of hot porcelain or glass in water-of-crystallisation practicals, evaporation to dryness and simple gravimetric work. Manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, they belong beside every Bunsen burner and are a standard line when buyers source crucible tongs for India lab benches.

Specifications

Typical Use

A classic use is heating hydrated copper sulphate in a crucible until its mass stops changing: the tongs lift the lid to check progress, move the hot crucible from the pipe-clay triangle to a heat-proof mat or desiccator to cool, and return it for another heating cycle. The same tongs take an evaporating dish off a tripod once a salt solution has been reduced, or steady the neck of a small flask while it is moved away from the burner.

Grip crucibles firmly around the body rather than by the rim, and keep the tips clean so that residues are not carried into a weighed sample. For larger hot beakers, a dedicated beaker tong with coated jaws gives a safer hold.

Manufacturer

The tongs are manufactured by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. For vendor registration, the company's Corporate Identity Number is U29309HR2020PTC087597, and its production site at 449, HSIIDC Industrial Area, Saha, Ambala operates under Factory Licence AMB-ONLINE-CHD-J-414. Our company profile gives further background.

Related Laboratory Equipment

Apparatus these tongs are most often used with during heating and weighing practicals:

• Crucible with lid — the vessel the tongs lift in and out of the flame
• Porcelain Dish (China Dish) — for evaporating solutions, moved with the tongs when hot
• Crucible Retort Ring — support ring for holding the crucible over the burner
• Vacuum Desiccator — where a hot crucible is placed to cool before weighing
• Beaker Tong — a larger tong with coated jaws for hot beakers

See the Glassware Beaker category for beakers and other handling accessories.

Frequently Asked Questions

What can these tongs pick up?
They are made for hot crucibles, evaporating dishes, flasks and small beakers — the items that are awkward or unsafe to hold by hand after heating.

How long are they?
8 inches, which keeps the hand a safe distance from the flame and the hot item while leaving good control.

Can I use them for large beakers?
They suit small beakers. For bigger, heavier beakers use our Beaker Tong, whose coated jaws are shaped to grip the beaker body.

How should I look after nickel plated tongs?
Let them cool, wipe off any spilled chemicals, and store them dry. Avoid leaving them in acid fumes, which can attack the plating over time.

Are they suitable for muffle furnace work?
Furnace-temperature suitability is not listed for these tongs; please contact us with your application before ordering.

What should I include in a quotation request?
The quantity, delivery location in India or abroad, and any matching crucibles or dishes you need; we will quote them together.

Request a Quote

Request prices by contacting us or by adding the tongs to your enquiry cart.

Last updated: 24 September 2026

Beaker Tong (Product Code: SLE/GB/10) is a 25 cm (10 in) nickel-plated steel tong whose plastic coated jaws open up to 11 cm (4.5 in), sized to hold beakers from 100 ml up to 1000 ml when they are too hot to touch. It gives students and technicians a controlled way to move or pour a hot beaker instead of reaching for a cloth or bare hands. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as a basic piece of chemistry lab equipment for schools in India as well as college practical halls and research prep rooms that heat liquids in beakers.

Specifications

Typical Use

Picture a beaker of water brought to the boil on a gauze over a tripod stand, the usual heating set-up in school labs across India, for a solubility or heating-curve experiment. When the reading is done, the tong closes around the beaker body below the rim, lifts it clear of the gauze and sets it on a heat-proof mat, or tilts it to pour the hot solution into an evaporating dish for crystallisation. It is just as useful at a hot plate or when retrieving a beaker from a water bath.

Grip the beaker around its middle, keep it upright while moving and pour away from yourself and others. Keep the plastic-coated jaws out of the flame itself, and wipe them clean after each practical so they keep a good grip.

Manufacturer

ScienceLab, the trading name of Ambala-based Jain Scientific Equipments Private Limited, makes this tong alongside the beakers, burners and stands it is used with, so a complete heating station can be ordered from one Haryana supplier. Learn more on our company profile.

Related Laboratory Equipment

Complete the heating station with these items:

• Glass Beaker — borosilicate beakers to heat and handle with the tong
• Hot Plate General Purpose — a flameless heat source from which beakers are lifted
• Tripod Stand 200mm — supports the beaker and gauze above a burner
• Crucible & Beaker Tongs — for crucibles, dishes and very small beakers
• Safety Goggles — eye protection while pouring hot liquids

Browse beakers and more accessories in the Glassware Beaker category.

Frequently Asked Questions

Which beaker sizes does it hold?
Beakers from 100 ml up to 1000 ml. The jaws open to 11 cm, so check that very wide or unusually shaped vessels fit within that opening.

Why are the jaws plastic coated?
The coating gives a better grip on smooth glass and softens contact with the beaker wall. Because it is plastic, keep the jaws out of direct flame.

Can it lift crucibles too?
It is designed for beakers. For crucibles and evaporating dishes, use our Crucible & Beaker Tongs.

What is it made of?
Nickel-plated steel, 25 cm long. Rinse off any chemical splashes and dry it before storage to protect the plating.

Is a warranty offered?
Warranty terms are given with the quotation; please contact us to confirm them.

Can we order tongs for every bench in a new lab?
Yes. We supply schools, colleges and distributors in India and international markets — send the number of benches or units and your delivery address.

Request a Quote

Ask for pricing through our contact page or add the tong to your enquiry cart.

Last updated: 24 September 2026

Beaker Brush (Product Code: SLE/GB/11) is a cleaning brush for beakers, with a 4 inch section of nylon bristles on an iron body, 14 inch long overall and 20 mm in diameter. The long stem reaches the base of large and tall beakers, while the nylon bristles scrub away dried residues, precipitates and indicator stains from the walls. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as one of the everyday items it offers as a lab consumables supplier in India.

Specifications

Typical Use

Clean glassware is the starting point of reliable results, so a beaker brush sits at every lab sink. After a practical, rinse out the beaker, add warm water with a little laboratory detergent, scrub the base and walls with the brush using a twisting motion, then rinse with tap water followed by distilled water and leave the beaker upside down on a drying rack. The 4 inch bristle head covers a large area per stroke, which speeds up washing after a full class has used the glassware.

Avoid pushing the bare end of the stem against the glass, as metal can scratch or chip it. Rinse the brush after use and let it dry before storing, which keeps the iron body from rusting and the bristles in shape; replace it once the bristles splay or wear down.

Supplier

This brush is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, as part of the cleaning and consumable items it offers alongside its laboratory apparatus. For vendor registration, the company's details are GSTIN 06AAECJ8618A1ZT and Importer-Exporter Code AAECJ8618A from the DGFT, under which its export orders are handled. More is available in our company profile.

Related Laboratory Equipment

Other items for a well-equipped glassware washing station:

• Brush, Beaker, Nylon — an alternative nylon beaker brush
• Bottle Brush — for reagent and narrow-neck bottles
• Brush Test Tube — a narrower brush for test tubes
• Wash Bottle LDPE with Narrow Mouth — for the final distilled-water rinse
• Drying Rack — drains and dries glassware after washing

Find beakers and handling accessories in the Glassware Beaker category.

Frequently Asked Questions

What is it designed to clean?
Beakers. The 14 inch length and 20 mm diameter suit open-mouthed vessels; for narrow-neck bottles or test tubes a slimmer brush works better.

Will the bristles scratch glass?
Nylon bristles are the usual choice for glassware. Scratches normally come from the metal stem, so keep the tip from striking the glass.

How do I stop the brush rusting?
The body is iron, so rinse off detergent and chemicals after use and let the brush dry in the air before putting it away.

Which cleaning agent should I use with it?
Warm water with a mild laboratory detergent handles most residues. Stubborn deposits may need a specific cleaning solution chosen for that residue; ask your lab supervisor before using strong acids or solvents.

Can I order brushes in bulk for several labs?
Yes. Brushes are often ordered in quantity with other washing supplies; tell us how many you need and where they should be delivered.

Do you export cleaning consumables?
Yes, we supply institutions and distributors in India and international markets, usually as part of a wider glassware or apparatus order.

Request a Quote

For a quotation, contact us or add the brush to your enquiry cart together with other lab supplies.

Last updated: 24 September 2026

Tall Form Beaker (Product Code: SLE/GB/12) is a clear borosilicate glass beaker with a taller, narrower profile than a standard low-form beaker, available in capacities from 10 ml to 2000 ml. The extra height helps keep liquid in the beaker during vigorous stirring or boiling and gives a deeper column for immersing an electrode or thermometer. Graduated, heat resistant and chemical resistant, it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, for chemical laboratories as part of its borosilicate laboratory glassware range in India.

Specifications

Typical Use

Tall form beakers are a favourite for titrations carried out on a magnetic stirrer: the burette tip sits just inside the rim, the stir bar spins without throwing droplets over the edge, and a pH or conductivity electrode can dip well below the surface. They are equally handy in gravimetric work, where a precipitate is digested and allowed to settle, and for boiling solutions that tend to froth. In volumetric analysis practicals for college and senior-school students, a tall beaker also makes colour changes at the end point easier to see against a white tile.

Heat tall beakers gradually on a hot plate or over a burner with a wire gauze, and remember that a taller vessel is easier to tip — clamp or support larger sizes when stirring. The graduations indicate approximate volume only.

Manufacturer

Tall form beakers in this range are manufactured by Jain Scientific Equipments Private Limited, a company in Ambala, Haryana, that markets its laboratory glassware and apparatus as ScienceLab. The company profile describes the business in more detail.

Related Laboratory Equipment

Apparatus that is commonly set up with a tall form beaker for titration and stirring work:

• Glass Beaker — standard low-form beakers for general mixing and heating
• Pyrex Beaker, Low Form — a wider, lower alternative with a marking spot
• Burette, Class-B, with Glass Key — delivers titrant into the beaker
• Magnetic Stirrer — keeps the solution mixed during titration
• Stirring Rod, Glass — for manual stirring and guiding pours

See every beaker type in the Glassware Beaker category.

Frequently Asked Questions

How does a tall form beaker differ from a normal beaker?
It is taller and narrower for the same capacity. That reduces splashing, suits electrodes and stirrers, and makes it easier to see changes in the liquid, while a low-form beaker is steadier and easier to reach into.

Which capacities are available?
Eight sizes: 10, 25, 50, 100, 250, 500, 1000 and 2000 ml.

Can it be heated?
Yes. It is made of heat resistant borosilicate glass; heat it gradually on a hot plate or on a wire gauze over a burner, and do not heat it empty.

Is it suitable for use with a magnetic stirrer?
Tall form beakers are widely used on magnetic stirrers. Choose a stir bar that fits the base of the size you use and start at a low speed.

Can the graduations be used for measuring?
Only as an approximate guide. For titrations and standard solutions, measure with a pipette, burette or volumetric flask.

How should a tender or institutional enquiry be sent?
List each capacity with its quantity and the delivery location in India or abroad through our contact page; we reply with a formal quotation.

Request a Quote

For prices on any capacity, contact us or add the beaker to your enquiry cart.

Last updated: 24 September 2026