Riser pipes convey media under pressure. As a result, they need to be pressure-tight in accordance with the requirements of the local installation conditions and the pumps. Pump Riser Pipe Manufacturers, Suppliers and Exporters in Ambala India, Pump Riser Pipe Manufacturers in Ambala India, Water and Sanitation Manufacturer in Ambala India.

Pump Centrifugal, Diesel 50cbm/hr

Product Code : SLE/PRP/01

Specifications:-
Mounted on a trolley with 2 wheels and a handlebar, it can also be mounted on a sturdy steel skid with carrying handles (field office must specify choice).
Self-priming centrifugal pumping set, capacity 50 Cubic Metres per hour at around 2900 RPM, at 20 metre TMH (Total Manometric Head) for 1-m suction head.

The pump casing, shaft and impeller are made from cast iron, and the water seal on the shaft is mechanical.
The skid has pre- drilled holes to facilitate bolting it to a foundation.
The pump is coupled directly to a diesel engine of matching power requirement.
The suction inlet and discharge outlets are available in various diameters depending on the pumping capacity of the pump; these vary in size such as: 50, 65, 75, 100 and 150 mm.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific laboratory equipments manufacturer, scientific laboratory equipments supplier, technical educational equipment exporter, technical educational equipment manufacturer, technical educational equipment supplier, technical educational equipments exporter.

Pump Electric sbmr bh 18cbm/hr

Product Code : SLE/PRP/02

Specifications:-
Complete Electrical submersible borehole pump, for pumping non-aggressive water without solid particles, all materials approved for use with drinking water. The pump is provided with a priming screw, top non-return valve, bottom inlet strainer and water lubricated bearings.

The standard pump is directly coupled and equipped with a 3-phase submersible motor, suitable for power supply of 380 V/400 V - 50 Hz - 3-phase. The motor is expected to be of maximum 7.5 kW. The embedded stator winding in the submersible motor is hermetically enclosed in stainless steel. Enclosure class IP 58. Built-in protection device dry running, including level relay electrodes.
Pump and motor are supplied with body and shaft, impeller/diffuser assemblies stainless steel, water lubricated bearings in Noril glass fiber impregnated thermoplastic resin/stainless steel, and complete with electric cabling.
Complete with motor cable.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific laboratory equipments manufacturer, scientific laboratory equipments supplier, technical educational equipment exporter, technical educational equipment manufacturer, technical educational equipment supplier, technical educational equipments exporter.

Handpump Variant 3 Norm

Product Code : SLE/PRP/03

This hand pump package Variant 3 does not comprise riser pipes or connecting rods. This package is foreseen combined with Risers and Rods. 
SS connecting rods with threaded couplers.
65mm ND riser pipe with Stainless Steel Couplings,

The hand pump features essentially the same above-ground equipment as the pump type, hot dipped galvanized , complete with head assembly, water tank, Normal Stand, but adapted for below ground 65mm riser pipes, equipped with Open Top Cylinder, to use with 65mm riser pipe with Stainless Steel couplings and with Stainless Steel (connecting) pump rods.

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational instruments supplier, technical institute lab equipments, technical lab equipments manufacturers, top lab equipments manufacturers, tvet lab equipment manufactruers, vocational training lab equipments exporter, vocational training lab equipments manufacturers.

Handpump SS-Riser 32ND

Product Code : SLE/PRP/04

Specifications:-
Riser pipe, made of stainless steel conforming to Nominal diameter 32mm (1"1/4), both ends male threaded, one end fitted with one female threaded coupling the other end protected with a HDPE thread protector covering the entire length of the thread. In length of 3 metres. Nominal diameter: 32mm.

Each riser pipe comes complete with:-
SS Rod Diameter: 10.8mm
One Connecting Rod
Made of Stainless Steel 304 grade, with M12 rolled male thread at one end, and M12 SS female threaded coupling welded at the other end 
Length of 3 meters (+10/-0mm).

Contact Science Lab for your Educational School Science Lab Equipments. We are best school lab equipment suppliers, lab equipment suppliers near me, laboratory equipment manufacturers in india, scientific equipment manufacturing company, educational equipments for science labs, educational lab equipment manufacturers in india.
 

Handpump DA 9-15m Variant

Product Code : SLE/PRP/05

Specifications:-
Complete assembly of handle assembly with rubber cushions
Complete assembly bottom flange assembly with bolts, with intermediate conical flange and suitable for bolting on to concrete platform
Direct Action (lowlift/shallow well) hand pump, for cylinder installation depths 9 to 12 meters, with glued (solvent cemented) PVC riser main and pump rods), complete as per below specifications:
Complete set of pump body with handle retainer and HDPE top bush
Conical rubber grommet modified
PVC pump rod with threaded joints cemented, 42mm OD x 3 meters
Complete assembly of 60mm OD x 2 meters long PVC cylinder pipe assembly with one complete foot valve assembly and one rubber seat
PVC top raising main with threaded joint cemented, 60mm OD x 3 meters
PVC well screen assembly, 2 meters long
PVC reducer (1 pc. PVC reducing socket 88.5mm ID and max. 93mm OD at the top side to fit with PVC casing pipe 89 mm OD x 60mm OD at the bottom side to fit with PVC cylinder reducer of 60mm ID & 1 pc. PVC cylinder reducer 60mm ID at the top side to fit with PVC reducing socket 60mm OD x 48mm ID at the bottom side to fit with 48 mm OD PVC lower casing)
Double ended spanner
Combination spanner
MS retrieving rod, 2.20 meter long, electro galvanized
Solvent cement 250mt in aluminium extruded bottle
with PE stopper and sealed with plastic cap
Piston Rod and Piston Assembly
PVC top pump rod with threaded joints cemented, 42mm OD x 3 meters
PVC raising mains with threaded joints cemented, 60mm x 3 meters
PVC lower casing 48mm OD x 3 meters with bell connectors to fit item 15
PVC sand trap complete assembly with end cap 48mm OD x 1 meter with ball connector to fit item 15

Contact Science Lab for your Educational School Science Lab Equipments. We are best educational lab equipments manufactruers, educational lab instruments manufacturer, educational laboratory glassware exporter, educational laboratory microscopes, educational laboratory suppliers, educational scienitific lab equipments.

Request A Catalogue

Request A Catalogue

Request Now for a Catalogue and Get best deals for your Products

Request Now