Skulls

Human Skull Bones Model (Product Code: SLE/BL/77) is a highly detailed anatomical skull, disarticulated into many sections, used to teach cranial bones, sinuses and skull structure in biology, anatomy and medical education. Its base is sectioned sagittally to display the sinuses, the calvarium is cut horizontally and the lower jaw is hinged, making it a thorough biology teaching aid for advanced classes. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is a Disarticulated Skull Model Used For?

Teachers use the model to show how the skull is built from separate bones and how they fit together, then take it apart so students can study each section closely. The sagittal cut through the base exposes the sinuses, while the horizontal cut through the calvarium lets students look into the cranial cavity.

The hinged lower jaw demonstrates the opening and closing movement used in chewing and speech. As a human biology model for senior school, nursing, dental and medical classes, it should be handled over a padded tray, reassembled after each lesson and stored covered.

What to Specify When Ordering

• The number of models needed for your anatomy or biology classes.
• Whether a storage case should be quoted with the model.
• Whether a simpler three-part skull would suit junior classes alongside this detailed model.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, an anatomical models manufacturer and the OEM of this skull model. The model is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to medical and nursing colleges, universities, schools, dealers and importers. Replacement sections or repeat orders can be discussed directly with the maker — ask us. See the ScienceLab profile.

Related Skulls

Other skull models and anatomy items that support the same lessons.

• Human Skull Model, Plastic — an economical life-size skull that opens into 3 parts.
• Human Skull Model, Life Size Colored — a skull with bones painted in different colours.
• Human Skull Model, Fetal Child — to compare fetal and adult skull bones.
• Human Skull Storage Case, Black Plastic — a storage case for skull models; confirm the fit with us.
• Human Skeleton Model, Disarticulated — to place the skull in the context of the whole skeleton.

See all skull models in the Skulls category.

Frequently Asked Questions

What does the Human Skull Bones Model show?
The Human Skull Bones Model is a highly detailed skull disarticulated into many sections. Its base is sectioned sagittally, displaying all 3 sinuses, the calvarium is cut horizontally, and the lower jaw is hinged to demonstrate movement.

How is the skull model taken apart?
The Human Skull Bones Model separates into many sections: the calvarium comes away along its horizontal cut, the base is divided along a sagittal cut and the jaw is hinged. Lay the sections out on a tray in order so students can reassemble the skull easily.

Who is the Human Skull Bones Model suitable for?
The Human Skull Bones Model suits senior school biology, nursing, physiotherapy, dental and medical anatomy classes, where students need to study individual skull sections and the sinuses rather than only the outside of the skull.

Who manufactures the Human Skull Bones Model?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Human Skull Bones Model as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Colleges, schools, dealers and importers buy direct from the maker and can ask about replacement sections.

What material and size is the model?
The current listing for the Human Skull Bones Model does not state its material or dimensions. Please ask through the contact page before ordering, and we will confirm the details you need for your tender or purchase file.

Can I order several skull models for a college anatomy lab?
Yes. The Human Skull Bones Model can be ordered in the quantity your anatomy or biology lab needs, for delivery across India and to international markets. Send the number of models and the delivery location for a quotation direct from the manufacturer.

Request a Quote

To request a quotation for the Human Skull Bones Model, use the contact page or add it to the enquiry cart together with any other anatomy models. ScienceLab quotes directly as the manufacturer.

Last updated: 24 September 2026

Human Skull Model, Plastic (Product Code: SLE/BL/81) is an economical life-size adult skull replica used to teach skull bones, sutures and teeth in school biology and introductory anatomy classes. It is dissectible into 3 parts, with a moveable jaw, a cut calvarium, visible suture lines and 3 removable lower teeth: an incisor, a cuspid and a molar. This piece of school biology lab equipment is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Plastic Human Skull Model Used For?

Students use the model to identify the main skull bones and follow the suture lines where they meet, then lift off the cut calvarium to view the inside of the cranium. The removable incisor, cuspid and molar let teachers compare the three tooth types and explain their roles in biting, tearing and grinding food.

Because it is an economical plastic model, a school can issue one to several groups at once for hands-on identification practice, making it a practical biology teaching aid. Work the moveable jaw gently, keep the removable teeth in a small labelled box when not in use and clean the surface with a damp cloth.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM manufacturer of this plastic skull and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Buyers receive the model straight from the factory rather than through a trader, and can ask the manufacturer about replacement teeth or repeat orders for new class groups. More about the company is on the ScienceLab profile.

Related Skulls

Other skulls and accessories that teachers often compare with this model.

• Human Skull Model, Life Size Colored — a 3-part skull with each bone painted a different colour.
• Human Skull Bones Model — a detailed skull disarticulated into many sections for advanced study.
• Economy Human Skull — another budget skull option in the range.
• Human Skull Storage Case, Black Plastic — for keeping a skull model protected between lessons.

Compare every model in the Skulls range.

Frequently Asked Questions

How many parts does the Human Skull Model, Plastic separate into?
The Human Skull Model, Plastic is dissectible into 3 parts. The calvarium is cut so the top of the skull lifts away, and the lower jaw is moveable, letting students view the cranial cavity and demonstrate jaw movement.

Which teeth are removable?
The Human Skull Model, Plastic has 3 removable lower teeth: an incisor, a cuspid (canine) and a molar. Students can take them out to compare the three tooth types, then refit them in the jaw after the lesson.

Is the plastic skull life-size?
Yes. The Human Skull Model, Plastic is a life-size adult skull, so students study the bones and suture lines at their real scale. Exact dimensions are not listed; ask us through the contact page if your tender needs them.

Who manufactures the Human Skull Model, Plastic?
The Human Skull Model, Plastic is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order directly from the maker.

Is this skull suitable for school use?
Yes. The Human Skull Model, Plastic is an economical model suited to school biology labs and introductory anatomy classes, where several groups need a skull at the same time to identify bones, sutures and teeth.

How do I request a quotation?
For the Human Skull Model, Plastic, send the number of models, any storage cases needed and the delivery location through the contact page or enquiry cart. The quotation comes directly from ScienceLab as the manufacturer.

Request a Quote

Get a quotation for the Human Skull Model, Plastic by writing through the contact page or adding it to the enquiry cart with the quantity you need.

Last updated: 24 September 2026

Human Skull Model, Life Size Colored (Product Code: SLE/BL/82) is a life-size skull model with its bones painted in different colours, used to help students identify individual cranial and facial bones in biology and anatomy classes. It disassembles into 3 parts, so learners can study the outer bone boundaries and then look inside the skull. One of the human anatomical models made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, it is produced at the company's own factory in Ambala, India.

Key Details

What Is a Colour-Coded Skull Model Used For?

Colour-coding makes the boundaries between bones obvious, so students can quickly pick out bones such as the frontal, parietal, temporal and occipital and see where each one ends. Teachers often use a coloured skull for the first introduction to skull anatomy, then move to a plain skull where bones must be identified by their sutures alone.

Taking the model apart into its 3 parts lets students see the inner surface of the skull as well as the exterior. Handle painted surfaces with clean, dry hands, avoid solvent cleaners that could lift the paint and store the model covered between lessons.

What to Specify When Ordering

• How many colour-coded skulls you need, for example one per demonstration bench or per student group.
• Whether a plain skull is also needed for suture-based identification tests.
• Any storage cases or related anatomy models to include in the same quotation.

OEM Manufacturer

The model is manufactured by ScienceLab, the trading name of Jain Scientific Equipments Private Limited, which is the OEM and makes and assembles its anatomical models at its own licensed factory at Saha, Ambala, Haryana, India. Institutional and tender buyers can register the company as a vendor using GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Colleges, schools, dealers and importers get quotations straight from the manufacturer. Read the company profile.

Related Skulls

Skulls and head models that extend lessons with this colour-coded skull.

• Human Skull Model, Plastic — an economical plain skull with removable teeth.
• Human Skull Bones Model — a skull disarticulated into many sections with a sectioned base.
• Human Skull with Facial Muscles — to connect skull bones with the facial muscles.
• Human Brain Model in Head — to relate the skull to the brain it protects.

The Skulls category lists the full set of skull models.

Frequently Asked Questions

Why are the bones on the Human Skull Model, Life Size Colored painted?
On the Human Skull Model, Life Size Colored, the bones are painted in different colours so that each bone and its boundaries can be identified precisely. This makes the model easier for beginners than a plain skull, where the sutures are the only guide.

How many parts does the coloured skull come apart into?
The Human Skull Model, Life Size Colored disassembles into 3 parts, allowing students to examine both the outer surface and the inside of the skull. Reassemble the parts after each lesson so that none are misplaced.

Is the coloured skull life-size?
Yes. The Human Skull Model, Life Size Colored is made at life size, so the bones, openings and proportions are studied at real scale. Exact dimensions and material are not listed; ask us if your purchase file needs them.

Who manufactures the Human Skull Model, Life Size Colored?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Human Skull Model, Life Size Colored as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Colleges, schools, dealers and importers buy directly from the maker.

How should the painted model be cleaned?
Clean the Human Skull Model, Life Size Colored with a soft, slightly damp cloth and dry it straight away. Avoid solvents, abrasive pads and strong disinfectants, which can dull or lift the painted colours that make the bones identifiable.

Can the model be supplied for a tender or bulk order?
Yes. The Human Skull Model, Life Size Colored can be quoted in bulk for schools, colleges, tenders and dealers across India and international markets. Send the quantity, delivery location and any vendor-registration requirements through the contact page.

Request a Quote

Request a manufacturer-direct quotation for the Human Skull Model, Life Size Colored through the contact page, or add it to the enquiry cart with other anatomy models.

Last updated: 24 September 2026

Human Skull Model, Fetal Child (Product Code: SLE/BL/84) is a lifelike PVC model of a fetal skull used to teach how the separate bones of a developing skull are arranged in biology, nursing, midwifery and medical classes. Measuring 10 x 8 x 10 cm, it shows the major structure of the different skull bones and has a spring-hinged mandible that opens to show the mouth's bone structures. The model is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Fetal Skull Model Used For?

A fetal skull looks very different from an adult one: the bones of the vault are still separate plates, and the face is small compared with the cranium. Teachers use this model beside an adult skull to explain skull growth, the role of sutures and fontanelles during birth, and how the jaw develops.

In nursing and midwifery training it supports lessons on the fetal head during delivery, and in school biology it works as a teaching aid for human development. Open the spring-hinged mandible gently to show the mouth region, and wipe the PVC surface with a damp cloth after handling.

OEM Manufacturer

ScienceLab, the trade name of Jain Scientific Equipments Private Limited, is the OEM and anatomical models maker that produces this fetal skull model at its own licensed factory at Saha, Ambala, Haryana, India. Nursing schools, medical colleges, schools, dealers and importers can buy it factory-direct and ask the manufacturer about repeat orders or matching anatomy models. The ScienceLab profile has more about the company.

Related Skulls

Models that pair with the fetal skull in development and childbirth lessons.

• Fetal Skull — another fetal skull model in the range.
• Human Skull Model, Plastic — a life-size adult skull for comparing adult and fetal bones.
• Human Birth Demonstration Model — to show the fetal head in relation to the birth process.
• Human Fetal Circulation Model — for related lessons on fetal development.

More adult and fetal skulls are listed under Skulls.

Frequently Asked Questions

What size is the Human Skull Model, Fetal Child?
The Human Skull Model, Fetal Child measures 10 x 8 x 10 cm and is made of PVC plastic. Its compact, lifelike form shows the major structure of the different bones of a fetal skull for close study on the bench.

Does the mandible move?
Yes. The mandible of the Human Skull Model, Fetal Child is spring-hinged, so it can be opened to view the bone structures of the mouth. Open and close it gently to protect the hinge.

Who uses a fetal skull model?
The Human Skull Model, Fetal Child is used in nursing, midwifery, medical and senior biology classes to explain how a fetal skull differs from an adult skull and how its separate bones relate to growth and childbirth.

Who manufactures the Human Skull Model, Fetal Child?
The Human Skull Model, Fetal Child is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), acting as the OEM, at its licensed factory in Saha, Ambala, Haryana, India. Institutions and dealers order directly from the maker.

How should the PVC model be cleaned?
Wipe the Human Skull Model, Fetal Child with a soft cloth lightly dampened with water and mild soap, dry it well, and keep it away from heat sources and direct sunlight while it is stored.

How do I order the fetal skull model?
To order the Human Skull Model, Fetal Child, send the quantity and delivery location in India or abroad through the contact page or add it to the enquiry cart. ScienceLab will send a quotation direct from the manufacturer.

Request a Quote

Place an enquiry for the Human Skull Model, Fetal Child through the contact page or the enquiry cart; the manufacturer replies with a quotation.

Last updated: 24 September 2026

Human Vertebral Column Model With Skull (Product Code: SLE/BL/97) is an anatomical teaching model used to show the skull, spine and pelvis as one connected axial skeleton in biology, nursing and physiotherapy classrooms. It comes with an entire skull and pelvis on the vertebral column, and the skull has a calvaria cut and a spring-held lower jaw. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its human biology model set range.

Specifications

What Is the Vertebral Column Model With Skull Used For?

Most spine models stop at the neck or the sacrum. This one keeps the whole chain together: the skull resting on the top of the column and the pelvis at its lower end, so a teacher can trace the load path from head to hips in a single demonstration. Students name the cervical, thoracic, lumbar, sacral and coccygeal regions in order, point out the natural curves, and see where the spine meets the pelvis at the sacroiliac joints.

The calvaria cut lets the class open the cranium during the same lesson, and the spring-held lower jaw shows how the mandible opens without coming loose. Physiotherapy and posture sessions use the model to explain why a change in one region of the spine affects the others. When moving it between rooms, support the column with both hands rather than lifting it by the skull. Schools planning biology teaching aids in India often choose it as a compact companion to a full skeleton.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM (original equipment manufacturer) of this spine-and-skull model. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, so schools, medical and physiotherapy colleges, dealers and importers buy it from the maker itself rather than through a trading house.

If a jaw spring or another part needs replacing after years of classroom use, ask us: spares and repeat orders are handled by the manufacturer directly. Learn more about the company on the ScienceLab company profile.

Related Skulls

These models extend a spine and skeletal-system unit built around the vertebral column with skull:

• Human Skull with Cervical Spine Model — a closer look at the atlas, axis and neck region.
• Human Cervical Spinal Column Model — the neck vertebrae on their own for detailed identification.
• Human Vertebral Model With Pelvis & Femur Heads — carries the study on to the hip joints.
• Economy Human Flexible Vertebral Column, Color Coded — a flexible alternative for showing spinal movement.
• Human Adult Male Pelvis Structural Model — the pelvis as a separate model for closer study.

Browse the full Skulls category for more skull and cranium models.

Frequently Asked Questions

What does the Human Vertebral Column Model With Skull include?
The Human Vertebral Column Model With Skull comes with an entire skull and pelvis joined to the vertebral column, so the axial skeleton can be shown as one piece. The skull has a calvaria cut and a spring-held lower jaw for classroom demonstrations.

What size is the Human Vertebral Column Model With Skull?
The Human Vertebral Column Model With Skull measures 44 × 18 × 12 cm overall. If you need to confirm its scale or check cabinet space before ordering, send your question through our contact page and we will answer with your quotation.

Can the skull of the Human Vertebral Column Model With Skull be opened?
Yes. The skull on the Human Vertebral Column Model With Skull has a calvaria cut, so the top of the cranium can be opened to show the inside, and its spring-held lower jaw lets students open the mouth without the mandible falling away.

Which courses use the Human Vertebral Column Model With Skull?
The Human Vertebral Column Model With Skull is used in school biology, nursing, physiotherapy and anatomy teaching wherever the link between skull, spine and pelvis must be explained, including lessons on spinal regions, spinal curves and posture.

Who manufactures the Human Vertebral Column Model With Skull?
The Human Vertebral Column Model With Skull is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and spare-part questions are all handled by the manufacturer.

Can the Human Vertebral Column Model With Skull be ordered in bulk or for export?
Yes. The Human Vertebral Column Model With Skull is supplied in quantity to schools, colleges, dealers and importers in India and international markets. Share the number of units and the delivery location so we can prepare a quotation.

Request a Quote

To price the Human Vertebral Column Model With Skull, send the quantity and delivery location through our contact page or add it to the enquiry cart. Quotations come direct from the manufacturer, with no trader in between.

Last updated: 24 September 2026

Human Skull (Product Code: SLE/A/08) is a life-sized, colour-coded plastic skull model used to teach the names and boundaries of the cranial and facial bones in school and college anatomy lessons. Each bone is coloured differently and a key to the bones and structures is included, while the jaw and skull cap both come off. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Colour-Coded Human Skull Used For?

Beginners often struggle to see where one skull bone ends and the next begins, because on real bone the sutures are faint. Colour coding solves that: the frontal, parietal, temporal and occipital bones of the vault, and facial bones such as the maxilla, zygomatic and nasal bones, stand out as separate blocks of colour. A typical lesson has students name each coloured region, then cover the key and quiz each other until they can identify every bone without help.

Lifting off the skull cap moves the class from the outside of the cranium to the floor inside it, and removing the jaw exposes the mandible for separate study. Because the model is unmounted, it can be turned upside down to examine the base of the skull and the large opening where the spinal cord passes. It is a staple of school biology lab equipment in India, from secondary classes to first-year nursing and paramedical courses.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) that makes this colour-coded skull at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, distributors and importers buy it factory-direct, and every quotation is prepared by the maker rather than a reseller.

Purchase departments that need vendor registration details can record the company's GSTIN 06AAECJ8618A1ZT and its Legal Entity Identifier 3358004HRD1JIVXKYX49. If a skull cap or jaw is lost, ask us about a replacement part. Read more on the ScienceLab company profile.

Related Skulls

Teachers building a skull-identification station often add these items:

• Human Skull Model — a 3-part skull with number-coded bones for numbered identification tests.
• Economy Human Skull — a detailed plastic skull showing sutures, foramina and processes, useful once students know the bones.
• Human Skull Bones Model — for studying the skull bones in more detail.
• Human Skull Storage Case, Black Plastic — keeps the skull, jaw and cap together between lessons.
• Human Brain Model in Head — shows what sits inside the cranium.

The Skulls category lists every human and animal skull model in the range.

Frequently Asked Questions

What makes the Human Skull easy to learn from?
The Human Skull is colour-coded, so each bone is a different colour and its edges are easy to follow. A key to identify the bones and structures is included, which lets students check their own answers during revision or self-study.

Which parts of the Human Skull are removable?
Both the jaw and the skull cap of the Human Skull are removable. Taking off the skull cap shows the inside of the cranium, and removing the jaw lets students examine the mandible separately from the rest of the skull.

Does the Human Skull come on a stand?
No. The Human Skull is an unmounted, life-sized model without a stand, so it can be picked up, turned over and passed along a bench to examine the base of the skull as well as the face and the top of the cranium.

How should the Human Skull be cleaned and stored?
The plastic Human Skull can be wiped with a soft, damp cloth; avoid solvents that could dull the colour coding. Store it away from direct sunlight, with the jaw and skull cap kept together, ideally in a closed case on a low shelf.

Who manufactures the Human Skull?
The Human Skull (SLE/A/08) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Buyers deal directly with the manufacturer for quotations and repeat orders.

What should a quotation request for the Human Skull include?
A quotation request for the Human Skull should give the product code SLE/A/08, the number of skulls needed and the delivery city or country. List any other models you need, such as a storage case, so everything can be quoted together.

Request a Quote

Ask for a price on the Human Skull through our contact page, or add it to the enquiry cart with any other models you need. The quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Human Skull with Cervical Spine Model (Product Code: SLE/A/15) is an approximately life-size plastic model of the skull joined to the neck vertebrae, used to explain how the head sits on the atlas and axis in anatomy, physiotherapy and dental training. It dissects into 3 pieces on a blue base and also shows the basilar artery, spinal cord and nerve branches, with a laminated key included. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Skull with Cervical Spine Model Used For?

The junction between head and neck is hard to picture from diagrams. The skull rests on the atlas, which carries the nodding movement, and the atlas turns around the axis when the head rotates from side to side. With both vertebrae in place beneath the skull and the rest of the cervical spine below them, a teacher can show these two movements in context before following the neck down vertebra by vertebra.

Because the spinal cord and nerve branches are shown with the bones, students link the cervical vertebrae to the structures they protect, a useful lead-in to lessons on neck injury and posture. The calvarium lifts off, the basilar artery is shown at the base of the skull, and the spring-held jaw lets dental students open and close the mouth. It fits well into a human biology model set in India for colleges teaching the head and neck as one unit.

OEM Manufacturer

This model comes from Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, which acts as its OEM (original equipment manufacturer) and makes and assembles it at its own licensed factory in Saha, Ambala, Haryana, India. Anatomy departments, schools, dealers and importers therefore receive quotations and delivery arrangements from the source, not from a trader.

Should the jaw spring or the laminated key need replacing, ask us, as the manufacturer handles such requests itself. Company background is on the ScienceLab profile page.

Related Skulls

For a complete head-and-neck teaching unit, these models work alongside the skull with cervical spine:

• Human Cervical Spinal Column Model — the neck vertebrae without the skull, for close identification work.
• Human Vertebral Column Model With Skull — continues the spine down to the pelvis.
• Human Brain Model with Arteries — follows the arterial supply on the brain itself.
• Human Brain Stem Model — shows where the brain continues into the spinal cord.
• Human Skull — a colour-coded skull for learning the individual bones.

More options are listed in the Skulls category.

Frequently Asked Questions

Which structures does the Human Skull with Cervical Spine Model show?
The Human Skull with Cervical Spine Model shows the skull and facial bones together with the atlas, axis and cervical spine. The basilar artery is visible at the base of the skull, and the spinal cord and nerve branches are shown as well.

How many pieces does the Human Skull with Cervical Spine Model dissect into?
The Human Skull with Cervical Spine Model dissects into 3 pieces and is mounted on a blue base. The calvarium is removable, while the jaw is held to the skull by a spring so it can move without being detached.

Can jaw movement be demonstrated on the Human Skull with Cervical Spine Model?
Yes. On the Human Skull with Cervical Spine Model a spring attaches the jaw to the skull, so a teacher can open and close the mouth to demonstrate jaw movement while the lower jaw stays connected.

Is a key included with the Human Skull with Cervical Spine Model?
Yes. A laminated key comes with the Human Skull with Cervical Spine Model to help students identify its bones and structures. The laminated finish lets the key be handled at the bench and wiped clean between groups.

Is the Human Skull with Cervical Spine Model life size?
The Human Skull with Cervical Spine Model is approximately life size. Exact measurements and the packed size for shipping are confirmed with each quotation, so please ask through our contact page if you need them before ordering.

Who manufactures the Human Skull with Cervical Spine Model?
The Human Skull with Cervical Spine Model is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and replacement-part requests come directly from the manufacturer.

Request a Quote

For a quotation on the Human Skull with Cervical Spine Model, write to us through the contact page or place it in the enquiry cart with your quantity. You will receive the price directly from the manufacturer.

Last updated: 24 September 2026

Loose Human Skull Bone, Ethmoid (Product Code: SLE/A/31) is a single life-size PVC replica of the human ethmoid bone, used to study this small, deeply placed skull bone on its own in anatomy, dental and ENT teaching. It is cast from a natural specimen, so its form follows real bone rather than a simplified drawing. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is the Loose Ethmoid Bone Used For?

In an assembled skull the ethmoid is almost out of sight, tucked between the eye sockets behind the nose, so students usually see only a thin strip of it in the orbit wall. Holding it as a loose bone changes that. A student can turn it in the hand and look for the parts every anatomy course names: the horizontal cribriform plate, the crista galli rising above it, the perpendicular plate that forms the upper nasal septum, and the labyrinths on either side that contain the ethmoidal air cells and carry the superior and middle nasal conchae.

Teachers use it to explain how smell reaches the brain through the cribriform plate, how the nasal septum is built, and why the ethmoidal sinuses matter to ENT and dental students. Keep a label card next to it during practicals, and store it in a small closed box so it is not mislaid among larger models. For departments comparing anatomical model manufacturers in India, a single cast bone like this is a practical way to fill a gap that complete skulls leave.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known to customers as ScienceLab, is the OEM (original equipment manufacturer) of this ethmoid replica and produces it at its own licensed factory in Saha, Ambala, Haryana, India. Colleges, schools, dealers and importers order it straight from the maker, which keeps quotations and follow-up orders simple.

The company is GST-registered in Haryana under GSTIN 06AAECJ8618A1ZT and holds the Legal Entity Identifier 3358004HRD1JIVXKYX49, two details that college purchase offices commonly request. For repeat orders, ask the manufacturer directly. Background on the company is on the ScienceLab profile.

Related Skulls

These items put the loose ethmoid in context during a skull or nasal-cavity practical:

• Human Skull Bones Model — shows how the ethmoid fits among the other skull bones.
• Anatomical Human Nasal Cavity Model — places the nasal conchae in the lateral nasal wall they help to form.
• Human Skull Model, Life Size Colored — a coloured whole skull for locating the ethmoid between the orbits.
• Human Skull Storage Case, Black Plastic — a case for small laboratory items such as loose bones.

Find more skull models in the Skulls category.

Frequently Asked Questions

What is the Loose Human Skull Bone, Ethmoid made of?
The Loose Human Skull Bone, Ethmoid is made of PVC and is cast from a natural specimen, so its shape follows a real human ethmoid. A PVC replica lets students handle the bone in practical classes where a natural ethmoid would be too delicate to pass around.

What size is the Loose Human Skull Bone, Ethmoid?
The Loose Human Skull Bone, Ethmoid is human life size, matching the natural bone it was cast from. Exact measurements are not listed on this page; if you need them for a display or storage plan, ask us through the contact page before ordering.

Why study the ethmoid as a loose bone?
The Loose Human Skull Bone, Ethmoid shows a bone that is mostly hidden inside an assembled skull. Held on its own, its plates, the crista galli and the air-cell labyrinths can be viewed from every side, which a complete skull does not allow.

Is the Loose Human Skull Bone, Ethmoid a single bone or a set?
The Loose Human Skull Bone, Ethmoid is a single loose bone: the ethmoid only. For the rest of the skull, choose one of the whole-skull models in our Skulls category, or ask us which items suit your syllabus.

Who manufactures the Loose Human Skull Bone, Ethmoid?
The Loose Human Skull Bone, Ethmoid is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Orders and quotations are handled by the manufacturer without an intermediary.

What information does a quotation for the Loose Human Skull Bone, Ethmoid need?
A quotation for the Loose Human Skull Bone, Ethmoid needs the product code SLE/A/31, the number of pieces and the delivery location. If each practical group needs its own bone, give the number of groups so the quantity is right.

Request a Quote

Request a price for the Loose Human Skull Bone, Ethmoid on our contact page or add it to the enquiry cart. Quotations are issued directly by the manufacturer.

Last updated: 24 September 2026

Human Skull Storage Case, Black Plastic (Product Code: SLE/A/54) is a carry case used to store and move human skull models, and other small laboratory items, in school and college labs. Made of black corrugated plastic with a carrying handle, it measures 10-1/4 in L × 7-1/4 in W × 8-1/4 in H and is designed for both articulated and disarticulated human skulls. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Skull Storage Case Used For?

A skull model left on an open shelf gathers dust, and its loose parts, such as a detachable jaw, a skull cap or the pieces of a disarticulated skull, tend to drift apart between terms. This case keeps one skull and all of its parts in a single closed box, and the carrying handle makes the trip from the preparation room to the classroom easier and safer than carrying the model in the hands.

Before ordering, compare the listed size with the model you plan to store so it sits without being squeezed. Label the outside of each case with the model name and code so the right skull reaches the right bench. Between uses the corrugated plastic can simply be wiped with a damp cloth. Labs that keep several skulls often give each model its own case so sets never get mixed.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies this storage case together with the skull models in its anatomy range, so a school or college can arrange models and storage in one enquiry. As a biology lab equipment supplier in India, it serves schools, colleges, dealers and importers in India and international markets. More about the company is on the ScienceLab profile.

Related Skulls

Skull models and storage items often ordered with this case:

• Human Skull — an unmounted, colour-coded skull with removable jaw and cap that benefit from being kept together.
• Human Skull Model — a 3-part skull whose separate parts store neatly in one case.
• Economy Human Skull — a plastic skull with a removable skull cap and mandible.
• Loose Human Skull Bone, Ethmoid — a small loose bone that is easily mislaid without a case.
• Human Skeleton Storage Case, Black Plastic — the larger case in the same black plastic storage line.

See all models in the Skulls category.

Frequently Asked Questions

What size is the Human Skull Storage Case, Black Plastic?
The Human Skull Storage Case, Black Plastic measures 10-1/4 in long, 7-1/4 in wide and 8-1/4 in high, which is about 26.0 × 18.4 × 21.0 cm. Compare these figures with your skull model before ordering to be sure it fits.

Which skulls does the Human Skull Storage Case, Black Plastic hold?
The Human Skull Storage Case, Black Plastic is designed for both articulated and disarticulated human skulls. If you are unsure whether a particular model fits, send its dimensions through our contact page and we will advise before you order.

What is the Human Skull Storage Case, Black Plastic made of?
The Human Skull Storage Case, Black Plastic is made of black corrugated plastic and has a carrying handle. The plastic surface can be wiped clean with a damp cloth, and the handle lets one person carry a skull between rooms safely.

Can the Human Skull Storage Case, Black Plastic store other items?
Yes. Besides skulls, the Human Skull Storage Case, Black Plastic works as a simple storage case for small laboratory items, such as loose model parts, identification keys and labels that need to stay together between classes.

Who supplies the Human Skull Storage Case, Black Plastic?
The Human Skull Storage Case, Black Plastic is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. It can be quoted on its own or together with skull models from the same range in a single enquiry.

Can the Human Skull Storage Case, Black Plastic be ordered in bulk?
Yes. The Human Skull Storage Case, Black Plastic can be supplied in quantity to schools, colleges, dealers and importers in India and international markets. State the number of cases and the delivery location when you request a quotation.

Request a Quote

To receive a price for the Human Skull Storage Case, Black Plastic, contact us through the contact page or add it to the enquiry cart, together with any skull models you need.

Last updated: 24 September 2026

Economy Human Skull (Product Code: SLE/A/55) is an economy-range plastic reproduction of a life-size human skull, used for hands-on skull anatomy practice in schools, nursing colleges and paramedical institutes. It shows the skull's structural details, including joints, sutures, fissures, foramina and processes, and has a removable skull cap and an articulated, removable mandible. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Economy Human Skull Used For?

Skull practicals run more smoothly when every group has a skull on its own bench rather than crowding round one demonstration model. For a school laboratory setup in India that needs several skulls, this economy model makes that possible. Groups trace the coronal, sagittal and lambdoid sutures, find foramina such as the foramen magnum and the mental foramen, and locate processes like the mastoid and styloid processes, then compare answers across benches.

With the skull cap lifted away, the class can look down into the cranial cavity and see the stepped floor on which the brain rests. The articulated mandible first shows how the jaw hinges against the skull; removing it then lets students study its body, ramus and condyle on their own. Keep a padded tray under the skull during practicals so parts are not dropped on hard benches.

OEM Manufacturer

The Economy Human Skull is produced by Jain Scientific Equipments Private Limited, trading as ScienceLab, which is the OEM (original equipment manufacturer) and makes it at its own licensed factory at Saha, Ambala, Haryana, India. As an anatomical models manufacturer selling direct, it gives schools, colleges, dealers and importers a factory-direct quotation, whether for a single skull or a full class set.

If a mandible or skull cap is damaged after heavy use, ask us about a replacement from the maker. Company details are on the ScienceLab profile page.

Related Skulls

Items that pair well with the Economy Human Skull in a skull or skeletal practical:

• Human Skull — a colour-coded skull with an identification key for first learning the bone names.
• Human Skull Model — a 3-part skull with number-coded bones and a key.
• Human Skull Storage Case, Black Plastic — keeps the skull, its cap and mandible together.
• Economy Human Spine (vertebrae) and Thorax — an economy model that continues the axial skeleton below the skull.

Compare more models in the Skulls category.

Frequently Asked Questions

What details does the Economy Human Skull show?
The Economy Human Skull reproduces the structural details of a life-size human skull, including its joints, sutures, fissures, foramina and processes. These are the landmarks that skull-identification practicals usually ask students to locate and name.

Can the Economy Human Skull be taken apart?
Yes. On the Economy Human Skull the skull cap is removable to show the internal structure, and the mandible is articulated and removable, so the lower jaw can be demonstrated in place and then studied on its own.

How does the Economy Human Skull differ from the colour-coded Human Skull?
The Economy Human Skull concentrates on structural detail such as sutures, foramina and processes, while the Human Skull (SLE/A/08) is colour-coded bone by bone and comes with an identification key. Teachers can introduce bone names on the colour-coded model and practise on the economy skull.

How should the Economy Human Skull be looked after?
The Economy Human Skull is made of plastic, so it can be cleaned with a damp cloth. Use a padded tray during practicals and store the skull cap and mandible with the skull so that no part goes missing between classes.

Who manufactures the Economy Human Skull?
The Economy Human Skull is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Schools and dealers receive quotations and repeat supplies directly from the manufacturer.

Can the Economy Human Skull be ordered as a class set?
Yes. The Economy Human Skull can be ordered in quantity for class sets, dealers and importers in India and international markets. Tell us how many skulls you need and the delivery location, and the manufacturer will prepare a quotation.

Request a Quote

Get a price for the Economy Human Skull by writing through our contact page or adding it to the enquiry cart. Quotations for single pieces and class sets come straight from the manufacturer.

Last updated: 24 September 2026

Sheep Skull, Plastic (Product Code: SLE/A/114) is a plastic replica of a sheep skull, complete with mandible, used for comparative anatomy and herbivore-adaptation lessons in zoology, veterinary and school biology labs. It is faithfully reproduced and anatomically accurate, featuring almost all the detail found in natural bone without the preparation a real skull needs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is the Plastic Sheep Skull Used For?

Setting a sheep skull beside a human skull is one of the clearest ways to show how diet and lifestyle shape anatomy. Students notice the long face, the eye sockets placed at the sides of the head for a wide field of view, and the long gap between the front of the jaws and the cheek teeth. They can then examine the broad, ridged cheek teeth used for grinding plants, and see that a sheep has no upper incisors, cropping grass against a firm dental pad instead.

In college practicals it serves as zoology lab equipment in India for mammalian skull identification, and in introductory veterinary and animal-husbandry anatomy it gives students a reference skull they can handle freely. A useful exercise is to have groups draw up a two-column table of differences between the sheep and human skulls, then explain each difference in terms of feeding and senses.

OEM Manufacturer

Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, is the OEM (original equipment manufacturer) of this sheep skull replica and makes it at its own licensed factory in Saha, Ambala, Haryana, India. Zoology departments, veterinary and agricultural colleges, schools, dealers and importers are served factory-direct rather than through a distributor chain.

For repeat orders, quote the product code SLE/A/114 when you ask us, and the manufacturer will handle the request itself. More about the company appears on the ScienceLab profile.

Related Skulls

Skulls that make useful comparisons with the sheep skull:

• Human Skull — a colour-coded human skull for side-by-side comparison with a herbivore.
• Economy Human Skull — a detailed human skull with removable cap and mandible for group comparisons.
• Anthropology Cranium Set — five early hominid-type crania for extending comparisons into human evolution.
• Human Skull Model, Life Size Colored — a coloured human skull for matching equivalent bones between species.

Browse the Skulls category for human and animal skull models.

Frequently Asked Questions

Does the Sheep Skull, Plastic include the lower jaw?
Yes. The Sheep Skull, Plastic is complete with its mandible, so students can study the upper skull and the lower jaw together and see how the cheek teeth of both jaws meet during chewing.

How realistic is the Sheep Skull, Plastic?
The Sheep Skull, Plastic is faithfully reproduced and anatomically accurate, featuring almost all the detail found in natural bone. That makes it suitable for identification practicals in which students would otherwise need a prepared natural sheep skull.

Why choose a plastic sheep skull over a natural one?
A Sheep Skull, Plastic avoids the sourcing, cleaning and preparation that a natural skull requires, and it can be wiped clean after each class. Being plastic, it can also be passed to every student during comparative anatomy practicals.

Which courses use the Sheep Skull, Plastic?
The Sheep Skull, Plastic is used in school biology lessons on herbivore adaptations, in BSc and MSc zoology practicals on mammalian skulls, and in introductory veterinary and animal-husbandry anatomy, often placed beside a human skull for comparison.

Who manufactures the Sheep Skull, Plastic?
The Sheep Skull, Plastic is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Enquiries, quotations and repeat orders are handled by the manufacturer itself.

What should I include when asking for a Sheep Skull, Plastic quotation?
For a Sheep Skull, Plastic quotation, send the product code SLE/A/114, the quantity and the delivery location. If you also need human skulls or the cranium set for comparison, list them in the same enquiry so they are priced together.

Request a Quote

Send your Sheep Skull, Plastic enquiry through our contact page or add the item to the enquiry cart. The quotation is prepared directly by the manufacturer.

Last updated: 24 September 2026

Human Skull with Facial Muscles (Product Code: SLE/A/123) is a life-size plastic skull model used to teach the muscles of facial expression and mastication in anatomy, dental and physiotherapy classrooms. Its facial and masticatory muscles are colour-differentiated, the masseter is removable, the left side is painted with muscle origins (red) and insertions (blue), and a moveable jaw on the right demonstrates chewing. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Skull with Facial Muscles Used For?

Learning a muscle means knowing where it starts, where it ends and what it does when it contracts. This skull covers all three: the red and blue painted points on the left side show origin and insertion, while the flexible muscles and moveable jaw on the right let a student open and close the mouth and watch the chewing muscles respond. Removing the masseter exposes the deeper structures beneath it, a common step in dental anatomy practicals.

Reflecting the occipitofrontalis and temporalis and lifting off the skull cap takes the class from the muscles to the cranial cavity in one demonstration. Colour differentiation between the facial and masticatory groups helps beauty-therapy and physiotherapy learners separate expression muscles from jaw muscles. Among biology lab equipment in India it is a compact choice, at 1.1 kg, that is easy to pass around a class.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of this muscle skull and produces it at its own licensed factory at Saha, Ambala, Haryana, India. As an anatomical models manufacturer selling factory-direct, it supplies medical, dental and nursing colleges, schools, dealers and importers in India and international markets without a trading middleman.

Repeat orders and questions about replacement parts, such as a lost masseter piece, go straight to the maker – just ask us. For vendor registration, the company's GSTIN is 06AAECJ8618A1ZT and its Legal Entity Identifier is 3358004HRD1JIVXKYX49. Read the company profile for more.

Related Skulls

These skull and head models are commonly used with the muscle skull in the same course:

• Human Skull Model, Life Size Colored — bones painted in different colours for learning where these muscles attach.
• Human Skull Bones Model — sectioned into many parts for studying the individual cranial and facial bones.
• Human Skull with Cervical Spine Model — shows how the skull joins the upper spine, with a spring-mounted jaw.
• Head and Neck Model — continues the muscle and vessel study down into the neck.

See the full Skulls category for more human and animal skull models.

Frequently Asked Questions

Which muscle can be removed from the Human Skull with Facial Muscles?
On the Human Skull with Facial Muscles, the masseter muscle is removable. The occipitofrontalis and temporalis are reflected rather than removed, which frees the skull cap so students can move from the facial muscles to the cranial cavity in one demonstration.

Does the jaw of the Human Skull with Facial Muscles move?
Yes. The Human Skull with Facial Muscles has a moveable jaw and flexible muscles on its right side, so students can open and close the mouth and demonstrate the basic chewing motion while watching the masticatory muscles respond.

What do the red and blue markings on the muscle skull mean?
On the left side of the Human Skull with Facial Muscles, red paint marks the points where muscles originate and blue marks where they insert, helping students learn each muscle's attachments before studying what it does.

How large and heavy is the Human Skull with Facial Muscles?
The Human Skull with Facial Muscles is a life-size plastic replica measuring 18 × 18 × 25 cm and weighing 1.1 kg, light enough to pass around a class or carry between teaching rooms.

How should the flexible muscles on the skull be cared for?
Move the jaw of the Human Skull with Facial Muscles gently and avoid over-stretching its flexible parts. Clean the model with a slightly damp cloth, keep it away from heat and direct sun, and do not use solvents on the painted surfaces.

Who manufactures the Human Skull with Facial Muscles?
The Human Skull with Facial Muscles is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Colleges, schools, dealers and importers buy it factory-direct, with quotations sent by the manufacturer.

Is the Human Skull with Facial Muscles supplied outside India?
Yes. The Human Skull with Facial Muscles is supplied to institutions across India and international markets. Share the quantity and delivery location through the contact page, and the quotation will come directly from the manufacturer.

Request a Quote

Request pricing for SLE/A/123 through our contact page, or add the skull to the enquiry cart if you are building a list of several models. Quotations are issued direct by the manufacturer.

Last updated: 24 September 2026

Fetal Skull (Product Code: SLE/A/126) is a fetal skull model used to teach fontanelles, sutures and the moulding of a baby's head during birth in midwifery, nursing and obstetrics training. It has a moveable spring-held jaw and is rod-mounted on a durable polymer base, from which the skull detaches for examination; without the stand it measures 11 × 11 × 20 cm. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Fetal Skull Model Used For?

At birth the bones of a baby's skull have not yet fused. The soft gaps between them, the fontanelles, and the sutures that join them are the landmarks a midwife feels for during examination to judge how the head is lying in the birth canal. With this model, students learn to find the diamond-shaped anterior fontanelle and the smaller triangular posterior fontanelle, and to trace the sagittal, coronal and lambdoid sutures that connect them.

Lifting the skull off its rod lets each learner hold it the way it would be felt during a delivery, while the tutor explains how unfused bones allow the head to mould and pass through the pelvis. Placed beside an adult skull, it also shows how large the cranium is compared with the face at this stage of life. Return it to the polymer base after the session so it stays on display and ready for the next group. As one of the human anatomical models made in India for maternal-health teaching, it is a core item for midwifery skills labs.

OEM Manufacturer

Jain Scientific Equipments Private Limited operates under the ScienceLab name and is the OEM (original equipment manufacturer) of this fetal skull, which it makes at its own licensed factory in Saha, Ambala, Haryana, India. Nursing schools, midwifery programmes, medical colleges, dealers and importers receive it directly from the maker.

For a replacement base or rod, or for repeat orders, ask us, as the manufacturer deals with these requests itself. The ScienceLab profile has more about the company.

Related Skulls

Models that complete a childbirth and fetal-development teaching station:

• Human Birth Demonstration Model — a female pelvis with a miniature skull for showing passage through the birth canal.
• Human Adult Female Pelvis Structural Model — the bony pelvis the fetal head must pass through.
• Fetal Positions Before Birth — shows how the baby may lie before delivery.
• Human Fetal Circulation Model — explains blood flow before birth.
• Human Skull Model, Fetal Child — another fetal skull, in PVC with a spring-hung mandible.

See the Skulls category for adult, fetal and animal skull models.

Frequently Asked Questions

Can the Fetal Skull be removed from its stand?
Yes. The Fetal Skull is rod-mounted on a durable polymer base, and the skull detaches from the stand for examination, so students can hold it in the hand to find the fontanelles and sutures, then return it to the stand for display.

What size is the Fetal Skull?
Without its stand, the Fetal Skull measures 11 × 11 × 20 cm. The stand adds to the overall height, so if you need the displayed or packed size for a cabinet, ask us through the contact page before ordering.

Does the jaw of the Fetal Skull move?
Yes. The Fetal Skull has a moveable, spring-held jaw. The spring keeps the lower jaw attached while still letting it move, so it stays in place when the skull is lifted off the stand and turned during examination.

Who uses the Fetal Skull?
The Fetal Skull is used by nursing and midwifery schools, obstetrics departments and biology teachers to explain fontanelles, sutures and how a baby's skull bones can overlap during birth, often alongside a pelvis or birth demonstration model.

Who manufactures the Fetal Skull?
The Fetal Skull is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come straight from the manufacturer, not a trader.

How can I order the Fetal Skull in quantity?
The Fetal Skull can be ordered singly or in quantity by nursing colleges, dealers and importers in India and international markets. Send the product code SLE/A/126, the number of models and the delivery location to receive a quotation.

Request a Quote

Ask for a Fetal Skull quotation through our contact page, or add it to the enquiry cart with any pelvis or birth models you need. Prices are quoted directly by the manufacturer.

Last updated: 24 September 2026

Human Skull Model (Product Code: SLE/A/128) is a life-size, 3-part human skull replica used to teach skull bones, sutures and teeth in school, dental and medical anatomy classes. Its sutures are coloured and its bones are number-coded against a comprehensive key, and it has full dentition, a spring-held lower jaw and a removable skull cap and mandible. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 3-Part Human Skull Model Used For?

Number coding turns this skull into a ready-made test. A teacher calls out a number, a student names the bone, and the key settles the answer, which makes it well suited to viva practice and revision before practical exams. The coloured sutures show exactly where neighbouring bones meet, so students can follow the coronal, sagittal, lambdoid and squamous sutures around the skull without guessing.

Full dentition makes the model just as useful in a dental anatomy class: learners identify incisors, canines, premolars and molars on both jaws, then close the spring-held lower jaw to see how the teeth meet in a bite. Removing the skull cap and mandible divides the replica into its 3 parts for separate study of the cranial cavity and lower jaw. It is a versatile addition to biology lab equipment for schools in India as well as to college anatomy museums.

OEM Manufacturer

This 3-part skull is made by Jain Scientific Equipments Private Limited, the company that trades as ScienceLab and acts as the OEM (original equipment manufacturer), at its own licensed factory at Saha, Ambala, Haryana, India. Dental colleges, medical and nursing institutions, schools, dealers and importers can buy it factory-direct for India and international markets.

If the key is misplaced or a part needs replacing, ask us and the manufacturer will advise directly. Company information is on the ScienceLab profile.

Related Skulls

Other skull models and accessories often chosen alongside the 3-part skull:

• Human Skull — an unmounted skull with colour-coded bones rather than numbers.
• Human Skull Bones Model — disarticulated into many sections, with a sagittally sectioned base showing the sinuses.
• Human Skull Model, Life Size Colored — a 3-part life-size skull with bones painted in different colours.
• Human Skull Storage Case, Black Plastic — keeps the 3 parts and key together between classes.
• Human Brain Model in Head — shows the brain within the cranial cavity.

More skulls are listed in the Skulls category.

Frequently Asked Questions

How are the bones identified on the Human Skull Model?
On the Human Skull Model the bones are number-coded and the sutures are coloured. A comprehensive key explains what each number refers to, so students can name bones by number and check their own answers.

What are the dimensions of the Human Skull Model?
The Human Skull Model is life-size and measures 20.0 × 13.5 × 15.5 cm. It is a 3-part replica, so allow storage space for the removable skull cap and mandible as well as the main skull and its key.

Does the Human Skull Model include teeth?
Yes. The Human Skull Model has full dentition, so dental and biology students can identify the incisors, canines, premolars and molars on both jaws and see how the teeth meet when the spring-held lower jaw is closed.

Which parts of the Human Skull Model can be removed?
The skull cap and the mandible of the Human Skull Model are both removable. The lower jaw is also spring-held, so it can be shown opening and closing while attached, then taken off for separate study.

What is the Human Skull Model made of?
The Human Skull Model is made of hard plastic. Clean it with a soft, damp cloth, avoid solvents that could affect the coloured sutures or number codes, and keep the parts and the key together in storage.

Who manufactures the Human Skull Model?
The Human Skull Model (SLE/A/128) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders are handled by the manufacturer directly.

Request a Quote

Request a quotation for the Human Skull Model through our contact page or add it to the enquiry cart with your required quantity. The price comes straight from the manufacturer.

Last updated: 24 September 2026

Anthropology Cranium Set (Product Code: SLE/A/129) is a set of 5 cast Hydrostone replicas of early hominid-type crania used to teach human evolution in anthropology, biology and archaeology courses. It covers Australopithecus afarensis, Australopithecus africanus, Homo habilis, Homo erectus and Homo neanderthalensis, so students can compare the crania side by side. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is the Anthropology Cranium Set Used For?

Placed in the order in which the species appear in the fossil record, the five crania let students see the broad trends of human evolution for themselves. The braincase becomes larger and more rounded, the face projects less, and the jaws and teeth become smaller, while the heavy brow ridge of the Neanderthal cranium invites discussion of how closely related species differed. Students can also compare the position of the opening at the skull base where the spinal cord passes, a clue to upright walking.

A good practical asks groups to describe each cranium in their own words, then set it beside a modern human skull and list the differences. Homo habilis leads naturally into early stone-tool use, and Homo erectus into how early humans spread across continents. Hydrostone is a hard gypsum-based casting material, so handle the crania over a padded surface, keep them dry and dust them with a soft brush. For departments comparing human anatomical model manufacturers in India, the set adds evolutionary depth to a skull collection.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known to customers as ScienceLab, is the OEM (original equipment manufacturer) of the Anthropology Cranium Set and produces it at its own factory in Saha, Ambala, Haryana, India. Universities, schools, museums, dealers and importers order the set factory-direct, with no trading intermediary.

The company is incorporated under CIN U29309HR2020PTC087597, and its premises at 449, HSIIDC Industrial Area, Saha, Ambala operate under Factory Licence AMB-ONLINE-CHD-J-414. If one cranium is damaged, ask us about a replacement. More detail is on the ScienceLab profile.

Related Skulls

Skulls that give the hominid crania a point of comparison:

• Human Skull — a life-sized modern human skull with colour-coded bones.
• Economy Human Skull — a detailed modern skull showing sutures, foramina and processes.
• Human Skull Model — a 3-part modern skull with full dentition for comparing teeth and jaws.
• Sheep Skull, Plastic — a non-primate skull for wider comparative anatomy.

Explore the Skulls category for more human and animal skulls.

Frequently Asked Questions

Which crania are included in the Anthropology Cranium Set?
The Anthropology Cranium Set includes 5 cranium replicas: Australopithecus afarensis, Australopithecus africanus, Homo habilis, Homo erectus and Homo neanderthalensis. Together they represent well-known early hominid-type species used in human evolution teaching.

What material is the Anthropology Cranium Set made of?
The Anthropology Cranium Set is cast in Hydrostone, a hard gypsum-based casting material. Handle the crania over a padded surface, keep them dry, and clean them with a soft brush rather than washing them with water.

Does the Anthropology Cranium Set include a modern human skull?
No. The Anthropology Cranium Set contains the 5 early hominid-type crania only. For comparison with modern humans, add a skull such as the Human Skull or the Economy Human Skull from our range to the same enquiry.

Which courses use the Anthropology Cranium Set?
The Anthropology Cranium Set is used in physical anthropology, in the human evolution units of biology and zoology courses, in archaeology teaching and in museum education, where learners compare braincase size, brow ridges and facial projection across species.

Who manufactures the Anthropology Cranium Set?
The Anthropology Cranium Set is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and replacement questions go directly to the manufacturer.

Can a single cranium from the Anthropology Cranium Set be ordered?
Whether one cranium from the Anthropology Cranium Set can be supplied on its own is confirmed case by case. Please name the species you need on our contact page, and we will state availability in the quotation.

Request a Quote

Ask for an Anthropology Cranium Set quotation through our contact page or add the set to the enquiry cart. The quotation is issued directly by the manufacturer.

Last updated: 24 September 2026