Computerized Gear Pump Test Rig Manufacturer,Supplier and Exporter in India

Computerized Gear Pump Test Rig (Product Code: SLE/MCE/47) is a bench-top positive displacement pump trainer used to measure gear pump flow, shaft power and efficiency with computer software in fluid mechanics laboratories. Its motor-driven gear pump has a clear acrylic pump head, runs at inverter-controlled speeds up to 1,800 rpm and circulates water from an acrylic reservoir on a stainless steel plinth. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Gear Pump Test Rig Used For?

Gear pumps move oil in hydraulic power packs, lubrication systems and fuel transfer because they deliver a fixed volume per revolution and cope well with high-viscosity fluids. Inside this rig, one gear is driven and the other turns in mesh with it; liquid is carried round in the spaces between consecutive teeth and forced out as the teeth re-engage, all clearly visible through the acrylic pump head.

Students set a series of speeds on the inverter and follow the software as it logs flow rate, motor shaft power, pump speed and the two efficiencies at each operating point. The results show classic positive displacement behaviour: flow stays close to proportional to speed, while volumetric efficiency reveals how much liquid leaks back internally. It is compact engineering educational equipment in India's mechanical labs, and its output is noticeably smoother than a reciprocating pump's.

What to Specify When Ordering

• Whether a computer for the display software should be included, or will be provided by your laboratory.
• Electrical supply at the bench: 230 V, single phase for the 250 W motor.
• Number of rigs for the student groups in each practical session.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of the Computerized Gear Pump Test Rig. The stainless steel plinth, acrylic reservoir and pump head, and pipework are made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India.

Colleges, dealers and importers therefore get quotations, support and replacement acrylic parts from the manufacturer itself — ask us when you need them. Details of the company are on the ScienceLab company profile.

Related Fluid Mechanics Equipment

Other pump trainers for comparing positive displacement and rotodynamic machines:

• Computerized Reciprocating Pump Test Apparatus — a piston pump rig that shows the pulsating flow a gear pump avoids.
• Gear Pump — an oil gear pump for use with a positive displacement pump module.
• Vane Pump — a balanced vane pump, another fixed-displacement design.
• Axial Flow Pump Test Rig — a high-flow, low-head rotodynamic pump for contrast.

More pump and hydraulics trainers are in the Fluid Mechanics category.

Frequently Asked Questions

What does the Computerized Gear Pump Test Rig measure?
The Computerized Gear Pump Test Rig shows flow rate, motor shaft power, pump speed, pump efficiency and volumetric efficiency on its computer software, using sensor conditioning electronics built into the rig.

What is the maximum performance of the gear pump?
The Computerized Gear Pump Test Rig delivers a typical maximum flow rate of 6.5 L/min and a maximum head of 25 m, with a maximum pump speed of 1,800 rpm from its 250 W, 230 V single-phase motor.

Can students see the gears working?
Yes. On the Computerized Gear Pump Test Rig, both the pump head and the water reservoir are made from clear acrylic, so students can watch the meshing gears carry water around the casing while the rig is running.

Why does the gear pump have no valves?
The pump in the Computerized Gear Pump Test Rig is a positive displacement gear pump: liquid trapped between the teeth is carried round and pushed out as the gears mesh, so no valves are needed and it can deliver against high pressures.

Is a computer supplied with the rig?
The Computerized Gear Pump Test Rig displays its readings on computer software. Whether a computer is included in the supply should be confirmed at quotation, so please state your requirement on the contact page.

Who manufactures the Computerized Gear Pump Test Rig?
The Computerized Gear Pump Test Rig is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Ambala, Haryana, India, and is supplied factory-direct to colleges, dealers and importers.

Request a Quote

For a quotation on the Computerized Gear Pump Test Rig (SLE/MCE/47), write to us on the contact page or add it to the enquiry cart. The manufacturer quotes directly for laboratories in India and international markets.

Last updated: 24 September 2026