- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P
Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P (Product Code: SLE/WDF/21) is a 90° transition elbow used to connect a 40 mm outside-diameter PVC pipe to a 1¼" nominal-diameter galvanised iron (G.I.) pipe in water-supply installations. Plumbers and project teams use it where a plastic line turns a corner and changes to metal in one fitting: one end is a solvent-cement socket, the other a female thread. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Elbow, 90° |
| PVC end | Socket, solvent cement joint, for PVC pipe of 40 mm outside diameter |
| G.I. end | Female threaded, for G.I. pipe of 1¼" nominal diameter |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/21 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 40mm PVC to GI Elbow Used For?
Mixed PVC and G.I. pipework is common where a buried plastic line rises to a metal riser, a stand post or a threaded valve. This elbow handles both jobs at once: it turns the flow through 90° and converts the 40 mm solvent-weld PVC pipe to a 1¼" threaded G.I. connection, saving a separate bend and adaptor and one extra joint.
Many installers make the threaded connection first and cement the PVC side afterwards, so turning the elbow on the thread does not disturb a fresh solvent joint. Seal the male G.I. thread with PTFE tape rather than a paste that may not suit PVC, and tighten by hand plus a modest turn, because over-tightening can split a plastic female thread. Keep service within 10 bar at 20°C and the 0 to 50°C range.
What to Specify When Ordering
- PVC side: 40 mm outside diameter, solvent-cement pipe.
- G.I. side: 1¼" nominal diameter pipe with a male thread to enter the female end.
- Quantity: count each point where the line both turns and changes material.
- Other sizes: if your PVC or G.I. sizes differ, ask us before ordering.
Supplier
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies this PVC-to-G.I. elbow from Ambala, Haryana, together with a wider set of water-supply and sanitation items for institutions and project buyers. For vendor registration, the supplying company's Importer-Exporter Code is AAECJ8618A (DGFT) and its GSTIN is 06AAECJ8618A1ZT. Read more on the company profile.
Related Water, Sanitation & Hygiene Supplies
Fittings that sit on either side of a PVC-to-G.I. change of direction:
- Elbow 90º equal fthd GI ND 14 Bar — an all-G.I. bend for runs that stay in metal.
- Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P — an all-PVC elbow for smaller solvent-weld branches.
- Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P — a straight PVC-to-G.I. transition for 110 mm mains.
- Cap fthd GI 14 Bar — closes a male-threaded G.I. end during staged work.
Browse all pipe fittings and hygiene products in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
Which pipes does the Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P connect?
The Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P connects a PVC pipe of 40 mm outside diameter, cemented into its socket, to a G.I. pipe of 1¼" nominal diameter, screwed into its female thread, while turning the line through 90°.
What is the pressure rating of the 40mm x 1¼" PVC elbow?
The 40mm x 1¼" PVC elbow (Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P) is rated 10 bar at 20°C and suits water from 0 to 50°C. Warmer water reduces the pressure a PVC fitting can safely carry, so design for the actual service temperature.
How should the threaded end of the 40mm PVC to GI elbow be sealed?
Seal the male G.I. thread entering the 40mm PVC to GI elbow with PTFE tape and avoid heavy wrenching, since over-tightening can crack a plastic female thread. Choose any thread compound only if its maker states it is compatible with PVC.
Is the Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P suitable for drinking water?
Please check with us before using the Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P on a drinking-water line. Tell us the application and the water source through the contact page, and ScienceLab will reply with what it can confirm for the supplied batch.
Who supplies the 40mm x 1¼" PVC to GI elbow?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 40mm x 1¼" PVC to GI elbow to schools, WASH programmes, contractors and dealers across India and international markets, alongside its laboratory equipment and hygiene ranges.
Request a Quote
Tell us the quantity of product code SLE/WDF/21 and your delivery location through the contact page, or place it in the enquiry cart with the rest of your PVC and G.I. fittings for a single quotation.
Last updated: 24 September 2026
