- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Infusion Giving Set, W/Burette, Sterile
Infusion Giving Set, W/Burette, Sterile (Product Code: SLE/HLI/011) is a sterile, single-use IV giving set with a graduated burette chamber, used to measure out and slowly administer a set volume of infusion fluid or injectable medicine in hospitals and clinics. Its approximately 100-150 ml burette is graduated every millilitre and feeds a drop chamber calibrated at 60 drops/ml, with an automatic shut-off valve. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Graduated chamber (burette) | Polystyrene (PS), transparent; capacity approximately 100-150 ml; graduations every ml; connected to the perforator by a tube of approximately 15 cm |
| Security gauge | Automatic shut-off valve that stops the infusion once the pre-set volume has flowed, to prevent air entering the drop-counting chamber and/or the tube |
| Drop-counting chamber | Located under the graduated chamber; calibrated 60 drops/ml; fitted with a 15 µ polyamide filter |
| Tube | PVC (polyvinyl chloride), transparent for detecting air bubbles, resistant to kinking |
| Tube length | Approximately 150 cm (overall set length approximately 170 cm) |
| Tube internal / external diameter | Approximately 3 mm / 4 mm |
| Perforator | Plastic (polyacetate); hollow tapering tube on a base at the proximal end for a good seal with the infusion bottle or bag; fitted with a protecting cap |
| Air inlet | ABS (acrylonitrile butadiene styrene), incorporated into the perforator, fitted with an air (bacteriological) filter |
| Flow regulator | ABS; keeps the flow regular during IV administration |
| Injection portal | ABS with synthetic rubber; for introducing precise volumes of injectable medicine into the infusion flow |
| Terminal connection (stopper) | ABS |
| Connector | Luer lock |
| Condition | Sterile, single use |
| Product code | SLE/HLI/011 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Burette Infusion Set Used For?
A burette set sits between the fluid bag and the patient line and holds only the volume that is meant to run. The nurse fills the graduated chamber from the bag to the prescribed mark, closes the upper clamp, and lets that measured amount drip through. When the chamber empties, the automatic shut-off valve closes so the drip chamber and tubing do not fill with air. This makes the set a common choice for children, fluid-restricted patients and medicines that must be diluted and given slowly.
The 60 drops/ml drop chamber gives small, countable drops, which makes slow rates easier to set by hand with the flow regulator. Medicines can be added through the injection portal into the burette or line under clinical direction. Nursing schools use burette sets to teach volume-controlled infusion and drip-rate calculation, and hospitals buying from a lab consumables supplier in India often keep them alongside standard giving sets.
What to Specify When Ordering
- Number of burette sets required.
- Burette capacity you need within the listed approximately 100-150 ml range.
- Whether standard 20 drops/ml giving sets should be quoted at the same time.
Supplier
Jain Scientific Equipments Private Limited, trading as ScienceLab in Ambala, Haryana, supplies this burette giving set to hospitals, paediatric units, training colleges and distributors. Buyers can combine it with infusion stands, syringes and dressings on one quotation. Company background is available on the ScienceLab profile page.
Related Medical Consumables & Dressings
Items that support a volume-controlled infusion:
- Infusion Giving Set, Sterile — the standard set without a burette.
- Infusion Stand Double Hook On Castors — for hanging the bag and burette at the right height.
- Infusion Arm Splint, Foldable, Adult — keeps the cannulated arm steady.
- Syringe, Disposable, 5ml, Sterile — for drawing up medicine to add through the injection portal.
- Needle, Disposable, 21G, Sterile — a needle for that syringe.
Find more in the Medical Consumables & Dressings category.
Frequently Asked Questions
What is the burette capacity of the Infusion Giving Set, W/Burette, Sterile?
The Infusion Giving Set, W/Burette, Sterile has a transparent polystyrene graduated chamber of approximately 100-150 ml, marked every millilitre, so the volume to be infused can be measured before it runs.
What drop factor does the burette infusion set have?
The burette infusion set has a drop-counting chamber calibrated at 60 drops/ml, located under the graduated chamber and fitted with a 15 µ polyamide filter. The small drop size helps when slow flow rates are set by hand.
What does the automatic shut-off valve do?
The automatic shut-off valve on the Infusion Giving Set, W/Burette, Sterile stops the infusion as soon as the pre-set volume has left the burette, preventing air from entering the drop-counting chamber and the tube.
How long is the tubing on the burette giving set?
The burette giving set has kink-resistant transparent PVC tubing of approximately 150 cm, with an internal diameter of about 3 mm and an external diameter of about 4 mm. The overall set length is approximately 170 cm.
How is this set different from the standard infusion giving set?
The Infusion Giving Set, W/Burette, Sterile adds a graduated burette, a shut-off valve and a 60 drops/ml drop chamber, whereas the standard ScienceLab giving set runs directly from the bag through a 20 drops/ml chamber. Choose the burette set when measured volumes matter.
Who supplies the Infusion Giving Set, W/Burette, Sterile?
The Infusion Giving Set, W/Burette, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, colleges and distributors in India and international markets. Ask us for pack quantity and the batch expiry date when requesting a quote.
Request a Quote
For pricing on the Infusion Giving Set, W/Burette, Sterile, send your quantity through the contact page or add the set to the enquiry cart with other infusion items.
Last updated: 24 September 2026
