Medical consumables and dressings are the single-use and fast-moving supplies, such as gauze, bandages, tapes, syringes, needles, infusion sets, drapes, splints and body bags, that wards, dressing rooms, labour rooms and health programmes reorder regularly. Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, supplies them alongside the instruments and devices in its hospital range. A clinic or programme can therefore restock from the same lab consumables supplier in India that it uses for its other equipment.
| Type | What it covers | Example products |
|---|---|---|
| Dressings and bandaging | Gauze compresses and rolls, a paraffin compress, cotton wool, bandages and adhesive tape | Compress, Paraffin, 10x10cm, Sterile; Gauze, Roll, 90cmx100m, Non-Sterile; Bandage, Elastic, 7.5cmx5m, Roll; Medical Tape, Perforated, 10cmx5m, Roll |
| Injection and sampling | Disposable syringes from 1 ml to 20 ml, an insulin syringe, needles and blood lancets | Syringe, Disposable, 10ml, Sterile; Syringe, Insulin, 1ml, U-100; Needle, Disposable, 21G, Sterile; Lancet, Blood, Sterile, Disposable |
| Infusion | Infusion giving sets with and without burette | Infusion Giving Set, W/Burette, Sterile |
| Maternity and newborn | Umbilical cord clamp and tape, newborn identification bracelet and an anti-shock garment | Clamp, Umbilical Cord, Sterile; Tape Umbilical, 3mmx50m, Non-sterile; Bracelet, Identification, Newborn; Non-Pneumatic Anti-Shock Garment |
| Theatre and ward | Woven surgical drape, single-edge razor, and adult and child body bags | Drape, Surgical, Woven; Razor, Single Edge, Plastic |
| Product | Product Code | Typical Use |
|---|---|---|
| Compress, Gauze, 10x10cm, Sterile | SLE/DDS/01 | Folded gauze compresses, pack of 5 |
| Cotton Wool, 500g, Roll, Non-Sterile | SLE/DDS/013 | Ward and dressing-room stock |
| Syringe, Disposable, 5ml, Sterile | SLE/HLI/012 | General-purpose disposable syringe |
| Infusion Giving Set, Sterile | SLE/HLI/010 | IV giving set with a drip chamber calibrated at 20 drops/ml |
| Infusion Arm Splint, Foldable, Adult | SLE/DDS/08 | Holding the arm in place during continuous IV infusion |
| Drape, Surgical, Woven | SLE/MR/04 | Multiple-use woven drape in blue or green |
| Blanket, Survival, 220x140cm | SLE/DDS/07 | Single-use blanket, silver-coated on one side |
Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies these consumables to hospitals, clinics, health programmes, NGOs, dealers and importers in India and abroad. Sterile or non-sterile status and size appear in each product name, and quotations, which come directly from the company, follow those listings. Tender documents can cite the company's CIN U29309HR2020PTC087597, and export consignments are handled under DGFT Importer-Exporter Code AAECJ8618A.
What is in the Medical Consumables & Dressings range?
The Medical Consumables & Dressings range covers gauze compresses and rolls, bandages, tape and cotton wool, disposable syringes, needles and lancets, infusion giving sets and an arm splint, umbilical clamps and tape, newborn ID bracelets, a surgical drape, a razor, a survival blanket and body bags.
How can I tell sterile and non-sterile items apart?
In the Medical Consumables & Dressings range, sterile or non-sterile status is part of each product name, for example Compress, Gauze, 10x10cm, Sterile against Gauze, Roll, 90cmx100m, Non-Sterile. Quote the exact name and code when ordering.
Can consumables be quoted together with kits?
Yes. Medical Consumables & Dressings can be quoted with Medical Kits, instruments and furniture on one enquiry. The first aid and periphery kits contain several of the same items, so loose consumables are a practical way to restock kits already in use.
Does ScienceLab make these consumables?
No. Medical Consumables & Dressings are supplied, not manufactured, by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, which quotes them directly to hospitals, clinics, programmes, dealers and importers in India and international markets.
What should a quotation request include?
A Medical Consumables & Dressings quotation request should list product names and codes, quantities with the pack size where one applies (for example pack, box or roll) and the delivery destination, so each line matches its listing.
Send your consumables list through the contact page, or add items to the enquiry cart and submit it for a quotation or catalogue.
Last updated: 24 September 2026
Body Bag, Infection Control, Child (Product Code: SLE/MR/01) is a single-use, zippered bag used to contain and transport the body of a deceased child safely and with dignity in hospitals, mortuaries and emergency response settings. Its unfolded size is 150 x 100 cm, with a prefixed absorbent pad inside, at least four padded carry handles and a white material 300 to 400 microns thick. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India that also sources hospital consumables.
| Parameter | Detail |
|---|---|
| Unfolded size (with pad) | 150 x 100 cm (l x w), ±10% |
| Use | Single use, disposable |
| Absorbent pad | Prefixed inside the bag |
| Carry capacity | Up to 160 kg |
| Thickness / colour | 300 to 400 microns / white |
| Strength | Tear proof and puncture resistant |
| Seams | Entirely heat-sealed, minimum 5 mm wide; 100% leak proof |
| Material | Special linear reinforced material; chloride and carbon free; non-porous and non-degradable; buried in soil, remains solid for a minimum of 5 years |
| Carry handles | Minimum of 4 padded, non-splintering handles, reinforced and integrated into the bag material |
| Zipper | Black or white, nylon teeth, smooth running; double-stitched into the fabric; full-length U shape with 25 cm return to show the face; double runner with large plastic or sturdy cloth loops; reinforced, heat-sealed stop |
| Label pouch | Integrated transparent pouch, 10 x 15 cm (length x width), for an identification tag |
| Packing | Individually packed, folded in a transparent plastic bag; label shows short description and size in cm and inch |
| Product code | SLE/MR/01 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Paediatric wards, maternity units, mortuaries and disaster-response teams keep child-size body bags so that a young patient who has died can be moved without an oversized adult bag. The smaller 150 x 100 cm format means less loose material to fold and handle, which makes transfer more careful and respectful for staff and families alike.
The U-shaped zip with a 25 cm return lets staff open the top section to show the face for identification without fully unzipping the bag. Place the identification tag in the transparent label pouch before moving the bag, use the padded handles rather than lifting by the material, and follow your facility's procedures for handling and protective equipment throughout.
Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies this child body bag for hospitals, health programmes and emergency organisations. It is a sourced medical consumable, quoted against the specification above and dispatched to buyers in India and international markets. See the ScienceLab profile page for more about the company.
Teams handling the deceased usually order these items at the same time:
View all Medical Consumables & Dressings.
What size is the Body Bag, Infection Control, Child?
The Body Bag, Infection Control, Child measures 150 x 100 cm unfolded, including its prefixed absorbent pad, with a tolerance of ±10%. It is sized for children, so there is less excess material than when an adult bag is used.
How much weight can the child body bag carry?
The Body Bag, Infection Control, Child has a carry capacity of up to 160 kg and at least four padded, non-splintering handles that are reinforced and integrated into the bag material, so it can be lifted evenly by several people.
How does the zipper on the child body bag work?
The Body Bag, Infection Control, Child has a full-length U-shaped zip with nylon teeth, double stitching and a double runner with loops. A 25 cm return lets the face be shown for identification without opening the whole bag.
Is the Body Bag, Infection Control, Child reusable?
No. The Body Bag, Infection Control, Child is single use and disposable. Each bag comes individually packed and folded in a transparent plastic bag, with a label that gives a short description and the size in centimetres and inches.
Who supplies the Body Bag, Infection Control, Child?
The Body Bag, Infection Control, Child is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. It can be quoted with adult body bags, gloves and waste bags for hospitals and emergency response organisations.
Can child body bags be supplied in bulk for emergency stock?
Yes. The Body Bag, Infection Control, Child can be quoted in bulk for hospitals, health programmes and relief agencies in India and international markets. Tell us the quantity, any adult bags required and the delivery destination when you enquire.
Send the quantity and delivery address for the Body Bag, Infection Control, Child through the contact page, or add it to the enquiry cart together with the adult size and protective items you need.
Last updated: 24 September 2026
Body Bag, Infection Control, Adult (Product Code: SLE/MR/02) is a single-use, heat-sealed bag used to contain, carry and transport an adult body in hospitals, mortuaries, epidemic response and mass-casualty settings. It unfolds to 230 x 110 cm, carries up to 270 kg on at least six padded handles, and has a prefixed absorbent pad rated to absorb a minimum of 5 litres. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a supplier of disposable lab and hospital consumables in India.
| Parameter | Detail |
|---|---|
| Unfolded size (with pad) | 230 x 110 cm (length x width), ±10% |
| Carry capacity | Up to 270 kg |
| Carry handles | Minimum of 6 padded, non-splintering handles, reinforced and integrated into the bag material |
| Use | Single use, disposable; tear proof and puncture resistant |
| Thickness / colour | 300 to 400 microns / white |
| Seams | Entirely heat-sealed, minimum width 5 mm; 100% leak proof |
| Bag material | Special linear reinforced material; chloride and carbon free; non-porous and non-degradable; buried in soil, remains solid for a minimum of 5 years |
| Zipper | Black or white, nylon teeth, smooth running, double-stitched; full-length U shape with 25 cm return to show the face; double runner with large plastic or sturdy cloth loops; reinforced, heat-sealed stop |
| Label pouch | Integrated transparent pouch, 10 x 15 cm (l x w), for an identification tag |
| Absorbent pad | Integrated and prefixed inside with water-resistant double-sided tape; two layers of padding; absorbs a minimum of 5 litres; resistant to 0.5% chlorine solution; single use; size 160 x 70 cm (±15%) |
| Pad material | Thick cotton lining on a polyethylene base; chloride free |
| Shelf life (as listed) | Minimum 5 years |
| Packing | Individually packed, folded in a transparent plastic bag; label shows short description and size in cm and inch |
| Product code | SLE/MR/02 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Hospitals, mortuaries, epidemic treatment centres and disaster-response teams use adult body bags to move the deceased while keeping body fluids contained. The pre-fitted absorbent pad is intended for use in the context of infection control: it soaks up fluids inside the bag, while the heat-sealed, leak-proof seams and non-porous material keep them from escaping during transport.
The pad withstands a 0.5% chlorine solution, so the bag suits settings where chlorine is part of the disinfection routine. Six padded handles spread the load among several carriers, and the material stays solid for at least five years when buried, which matters where burial follows directly. Always use the protective equipment and handling procedures your organisation specifies.
This adult body bag comes from Jain Scientific Equipments Private Limited, the Ambala firm that trades as ScienceLab. The company supplies it to hospitals, public-health programmes and relief organisations as a sourced medical consumable, matched to the specification on this page and shipped within India and to international markets. Visit the ScienceLab profile page to learn about the company.
These products support safe handling and transfer:
Browse all Medical Consumables & Dressings.
What are the dimensions of the Body Bag, Infection Control, Adult?
The Body Bag, Infection Control, Adult measures 230 x 110 cm unfolded, including the prefixed absorbent pad, with a ±10% tolerance. The pad inside measures 160 x 70 cm (±15%) and covers the main area where fluids collect.
How much can the adult body bag carry?
The Body Bag, Infection Control, Adult has a carry capacity of up to 270 kg. It has at least six padded, non-splintering handles reinforced into the bag material, so the load can be shared between several carriers.
What does the absorbent pad in the adult body bag do?
The absorbent pad in the Body Bag, Infection Control, Adult absorbs at least 5 litres of fluid. It has two layers of padding, a thick cotton lining on a polyethylene base, and is fixed inside with water-resistant double-sided tape.
Can the Body Bag, Infection Control, Adult be used with chlorine disinfectant?
The absorbent pad of the Body Bag, Infection Control, Adult is listed as resistant to 0.5% chlorine solution, and both bag and pad are chloride free. Follow your organisation's own disinfection protocol when chlorine is used during handling.
What is the shelf life of the adult body bag?
The listing for the Body Bag, Infection Control, Adult gives a shelf life of a minimum of 5 years, stated with the absorbent pad specification. Store the individually packed bags in a cool, dry place and rotate stock so older bags are used first.
Who supplies the Body Bag, Infection Control, Adult?
The Body Bag, Infection Control, Adult is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) in Ambala, Haryana, India, for hospitals, health programmes and relief agencies in India and international markets. It can be quoted together with the child size.
For pricing, send the number of adult bags and your delivery location through the contact page, or place the Body Bag, Infection Control, Adult in the enquiry cart with stretchers, gowns and gloves for one quotation.
Last updated: 24 September 2026
Drape, Surgical, Woven (Product Code: SLE/MR/04) is a reusable square fabric drape used to mark out and cover the working zone around a patient during medical and surgical procedures in operating theatres, clinics and delivery rooms. It measures 1 m x 1 m (±10%), has four hemmed borders and comes in blue or green polyester/cotton or 100% cotton fabric weighing 135 to 175 g per m². It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India.
| Parameter | Detail |
|---|---|
| Type | Surgical drape: square of fabric with 4 hemmed borders |
| Size | 1 m x 1 m (±10%) |
| Material | Polyester/cotton fabric (50/50% or 65/35%) or 100% cotton fabric |
| Fabric weight | 135 g to 175 g per m² |
| Colours | Blue or green |
| Use | Multiple use |
| Washing and reprocessing | Normal washing; withstands boiling and autoclaving; resists chlorine 0.1% |
| Instructions for use | Disinfect in a chlorine solution, wash and autoclave in a steam steriliser; used sterile for aseptic medical/surgical procedures |
| Product code | SLE/MR/04 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A drape defines the zone where a medical or surgical procedure takes place on the patient, covering the surrounding skin and surfaces so that instruments and gloved hands work within a clean field. The one-metre square format suits minor surgery, suturing, catheter insertion, delivery-room procedures and dressing changes, and several drapes can be arranged together to frame a larger area.
Because the drape is woven linen rather than a disposable sheet, it is reprocessed between uses: disinfect it in a chlorine solution, wash it, then autoclave it in a steam steriliser before any aseptic procedure. The listing does not state that it is delivered sterile, so treat new stock as needing the same reprocessing. Blue and green are the usual theatre colours because they reduce glare under bright lights.
Jain Scientific Equipments Private Limited supplies the woven surgical drape under its ScienceLab trading name from Ambala, Haryana. Theatre linen of this kind is a sourced medical textile, and the fabric blend and colour are confirmed on each quotation so hospitals, clinics and health programmes in India and international markets receive what they specify. More about the company is on the ScienceLab profile page.
These items are used in the same procedures and reprocessing cycle:
See the full Medical Consumables & Dressings range.
What size and fabric is the Drape, Surgical, Woven?
The Drape, Surgical, Woven is a 1 m x 1 m square (±10%) with four hemmed borders. It is made in polyester/cotton (50/50% or 65/35%) or 100% cotton, with a fabric weight of 135 g to 175 g per square metre.
Is the Drape, Surgical, Woven supplied sterile?
The listing does not state that the Drape, Surgical, Woven is delivered sterile. It is reusable linen that is used sterile, so disinfect, wash and autoclave it under your facility's procedures before any aseptic medical or surgical use.
How is the woven drape reprocessed?
The Drape, Surgical, Woven is disinfected in a chlorine solution, washed normally and autoclaved in a steam steriliser. The fabric withstands boiling and autoclaving and resists 0.1% chlorine, which makes it suitable for repeated reprocessing cycles.
Which colours are available for the surgical drape?
The Drape, Surgical, Woven is available in blue or green. Both colours are common in theatres; state your preference when ordering, especially if you want drapes to match existing gowns and linen already in circulation.
How many times can the drape be reused?
The Drape, Surgical, Woven is listed for multiple use, but the number of cycles is not stated. Inspect each drape after reprocessing and withdraw any with holes, thin areas or damaged hems; ask us through the contact page for further detail.
Who supplies the Drape, Surgical, Woven?
The Drape, Surgical, Woven is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. It can be quoted in your chosen fabric and colour, alongside gowns and dressings, for buyers in India and international markets.
State the fabric, colour and quantity of the Drape, Surgical, Woven through the contact page, or add the drape to the enquiry cart with the theatre linen and dressings you are ordering.
Last updated: 24 September 2026
Sachet, Tablet, Plastic, 10x16cm (Product Code: SLE/CPG/011) is a transparent, resealable polyethylene bag used to dispense and label tablets for patients in pharmacies, clinics, dispensaries and health posts. It has an interlock-type self-sealing closure, three white write-on stripes for patient and dosage details, and a 0.05 mm (50 micron) film, and it comes in packs of 100. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India.
| Parameter | Detail |
|---|---|
| Description | Plastic tablet bag, sealable with interlock-type closure, 10 x 16 cm |
| Pack size | Pack of 100 |
| Material | Transparent, virgin polyethylene |
| Closure | Self-sealing interlock type on 1 short side; securely sealed along the 2 long sides |
| Active length | 150 mm (below the base of the seal) |
| Length above the seal | 10 mm |
| Width | 100 mm |
| Film thickness | 0.05 mm (50 microns) |
| Write-on area | Three white horizontal stripes printed on one side, each approx. 100 mm across x 15 mm wide |
| Product code | SLE/CPG/011 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Dispensing staff count out a patient's tablets, place them in the sachet and press the interlock closure shut, so the medicine stays together, dry and visible through the clear film until it is taken. The three white stripes give room to write the patient's name, the medicine and strength, and the dose instructions, which reduces mix-ups when several patients are served from the same counter.
Write on the stripes with a ballpoint or fine permanent marker before filling, so the pen does not press on the tablets. Do not overfill: tablets should sit below the seal so the closure locks along its full width. Keep packs sealed in a cool, dry store until use, away from direct sunlight.
ScienceLab, the trade name of Jain Scientific Equipments Private Limited in Ambala, supplies these tablet sachets for pharmacies, hospitals and health programmes. Dispensing consumables of this kind are sourced to the listed specification and quoted by the pack, with dispatch arranged to buyers across India and international markets. Read about the company on the ScienceLab profile page.
These items are handy at a dispensing counter:
Browse all Medical Consumables & Dressings.
What size is the Sachet, Tablet, Plastic, 10x16cm?
The Sachet, Tablet, Plastic, 10x16cm is 100 mm wide, with an active length of 150 mm below the base of the seal and a further 10 mm above the seal. That space holds a typical course of tablets for one patient.
How many sachets are in a pack?
The Sachet, Tablet, Plastic, 10x16cm comes in packs of 100. Order by the number of packs, basing the quantity on how many prescriptions your pharmacy or clinic dispenses each week and the time between deliveries.
What is the tablet sachet made of?
The Sachet, Tablet, Plastic, 10x16cm is made of transparent, virgin polyethylene film 0.05 mm (50 microns) thick. It is sealed along both long sides and closes with a self-sealing interlock on one short side.
Can I write on the Sachet, Tablet, Plastic, 10x16cm?
Yes. The Sachet, Tablet, Plastic, 10x16cm has three white write-on horizontal stripes printed on one side, each approximately 100 mm across and 15 mm wide, for the patient's name, medicine and dosage instructions.
Who supplies the Sachet, Tablet, Plastic, 10x16cm?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Sachet, Tablet, Plastic, 10x16cm. It is quoted by the pack of 100 for pharmacies, hospitals and health programmes in India and international markets.
What does a quotation for tablet sachets need?
For a quotation on the Sachet, Tablet, Plastic, 10x16cm, give the number of packs of 100, any related counter items you want priced, and the delivery address. Send the details through the contact page.
Request pricing for the Sachet, Tablet, Plastic, 10x16cm on the contact page, or add the packs you need to the enquiry cart with other pharmacy consumables.
Last updated: 24 September 2026
Tourniquet, Latex-Free, 50cm (Product Code: SLE/CPG/012) is a reusable, latex-free elastic strip used to apply temporary pressure around a limb so that veins are easier to locate for blood collection, cannulation and injections in clinics, wards and laboratories. The solid elastic strip is 50 to 75 cm long and 1.8 to 2.5 cm wide, and it is non-sterile. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India for hospitals and diagnostic labs.
| Parameter | Detail |
|---|---|
| Type | Elastic strip, solid |
| Length | 50 to 75 cm |
| Width | 1.8 to 2.5 cm |
| Material | Latex free |
| Use | Reusable |
| Sterility | Non-sterile |
| Estimated gross weight / volume (as listed) | 0.540 kg / 0.001 m³ |
| Product code | SLE/CPG/012 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Phlebotomists, nurses and laboratory staff wrap the strip around the upper arm or forearm above the planned puncture site and tuck or hold the end so it stays in place. The pressure slows venous return, the veins fill and stand out, and it becomes easier to insert a needle or cannula. The strip is released as soon as blood flows or the line is secured, and it should not be left on longer than needed.
Being latex free, the tourniquet can be used with patients and staff who are sensitive to natural rubber latex. It is reusable but non-sterile, so clean it between patients according to your facility's infection-prevention procedures, keep it away from the puncture site itself, and replace it once the elastic loses its stretch or becomes soiled.
The latex-free tourniquet is supplied by Jain Scientific Equipments Private Limited, which operates as ScienceLab from Ambala, Haryana. It is a sourced medical consumable, offered to hospitals, blood-collection centres and teaching laboratories alongside syringes, needles and other clinical items, with delivery across India and to international markets. See the ScienceLab profile page for company details.
These items are used together with a tourniquet during blood collection and cannulation:
View the complete Medical Consumables & Dressings range.
How long is the Tourniquet, Latex-Free, 50cm?
The Tourniquet, Latex-Free, 50cm is a solid elastic strip listed at 50 to 75 cm long and 1.8 to 2.5 cm wide. That length wraps around most adult upper arms and forearms with enough spare strip to grip or tuck in.
Is the tourniquet really latex-free?
Yes. The Tourniquet, Latex-Free, 50cm is listed as latex free, which makes it suitable where patients or staff have a sensitivity to natural rubber latex. Check your own allergy protocols for any other materials that must be avoided.
Is the Tourniquet, Latex-Free, 50cm sterile?
No. The Tourniquet, Latex-Free, 50cm is non-sterile and reusable. It is applied above the puncture site rather than on it, and it should be cleaned between patients according to your facility's infection-prevention procedures.
What does the listed weight of 0.540 kg refer to?
The Tourniquet, Latex-Free, 50cm listing gives an estimated gross weight of 0.540 kg and a volume of 0.001 m³, figures normally used for shipping. Ask us through the contact page how many pieces that quantity covers.
Who supplies the Tourniquet, Latex-Free, 50cm?
The Tourniquet, Latex-Free, 50cm is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. It can be quoted with syringes, needles and other blood-collection items for hospitals and laboratories.
Can tourniquets be ordered in bulk or for export?
Yes. The Tourniquet, Latex-Free, 50cm can be quoted in bulk for hospitals, health programmes and teaching laboratories in India and international markets. State the quantity and the delivery destination when you send your enquiry.
Ask for a price on the Tourniquet, Latex-Free, 50cm through the contact page, or add it to the enquiry cart together with the syringes and needles for your collection room.
Last updated: 24 September 2026
Draw Sheet, Plastic, 90x180cm (Product Code: SLE/CPG/013) is a polyethylene (PE) sheet laid across a hospital bed to keep the mattress and linen protected from body fluids in wards, delivery rooms and clinics. Nursing teams place it under the patient's hips and trunk; this sheet is 100–150 microns thick, made of opaque or translucent PE and delivered non-sterile. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals and buyers handling laboratory equipment tenders in India.
| Parameter | Detail |
|---|---|
| Type | Plastic draw sheet (bed protection) |
| Material | Opaque or translucent plastic, polyethylene (PE) |
| Nominal size | 90 x 180 cm |
| Width | 90–110 cm |
| Length | 150–180 cm |
| Thickness | 100–150 microns (0.10–0.15 mm) |
| Sterility | Non-sterile |
| Product code | SLE/CPG/013 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A draw sheet covers only the central part of the bed, where spills, urine, wound drainage or delivery fluids are most likely to reach the mattress. The plastic layer acts as a barrier, and a cotton sheet is usually placed over it so the patient does not lie directly on the plastic. After soiling, staff change the draw sheet instead of stripping the entire bed.
Typical settings include general wards, maternity and labour rooms, elderly care and field clinics. The long side of the sheet is laid across the bed so that both ends can be tucked under the mattress and the sheet stays in place. Hospitals ordering ward items as a scientific equipment bulk supply can add the draw sheet to the same enquiry as their dressings and drainage bags.
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a company based in Ambala, Haryana. For this plastic draw sheet the company acts as supplier: it sources the item and ships it with other hospital consumables to clinics, hospitals and aid programmes in India and international markets. Company background is on the ScienceLab company profile.
Bed-protection sheets are usually ordered together with other ward and delivery-room items:
See the full range in Medical Consumables & Dressings.
What size is the Draw Sheet, Plastic, 90x180cm?
The Draw Sheet, Plastic, 90x180cm is listed with a width of 90–110 cm and a length of 150–180 cm. If your tender or ward standard names one exact size within that range, state it in your enquiry and we will confirm what can be supplied.
What material is the plastic draw sheet made of?
This plastic draw sheet is made of polyethylene (PE), either opaque or translucent, with a thickness of 100–150 microns (0.10–0.15 mm). Mention whether you prefer the opaque or the translucent version when you request a quotation.
Is the Draw Sheet, Plastic, 90x180cm sterile?
No. The Draw Sheet, Plastic, 90x180cm is supplied non-sterile, because it is a bed-protection item rather than a sterile-field product. If your facility needs a sterile sheet or drape for procedures, contact us before ordering so we can suggest a suitable item.
Who supplies the Draw Sheet, Plastic, 90x180cm?
The Draw Sheet, Plastic, 90x180cm is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the sheet and delivers it with its wider range of hospital consumables to buyers in India and international markets.
What information does a quotation for plastic draw sheets need?
A quotation for plastic draw sheets needs the quantity, the width and length you require within the listed ranges, the thickness, your opaque or translucent preference and the delivery destination. Send these details through the contact page and ScienceLab will reply with price and availability.
Can ScienceLab handle large hospital or programme orders for draw sheets?
Yes, ScienceLab accepts enquiries for plastic draw sheets from hospitals, NGOs, distributors and procurement agencies in India and international markets. Share the total quantity and destination on the contact page and we will confirm availability and packing for your order.
To get prices for the Draw Sheet, Plastic, 90x180cm, send your quantity and size details through the ScienceLab contact page, or add the item to the enquiry cart together with other hospital supplies.
Last updated: 24 September 2026
Bag, Urine, Collecting, 2000ml (Product Code: SLE/CPG/014) is a single-use drainage bag used to collect and measure urine from a catheterised patient in hospital wards, clinics and home-care settings. Its 2000 ml bag is marked every 100 ml and connects through an 85–95 cm kink-resistant, transparent inlet tube with a universal connector. The bag is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which works as a lab consumables supplier in India for hospitals and health centres.
| Parameter | Detail |
|---|---|
| Type | Urine collection bag |
| Capacity | 2000 ml |
| Graduations | Every 100 ml, for reading the collected volume |
| Inlet tube | Transparent, kink-resistant plastic, 85–95 cm long |
| Connector | Universal connector with protective cap |
| Hanging | Reinforced eyelets |
| Bag material | Medical-grade plastic: polyvinyl chloride (PVC) or ethylene vinyl acetate (EVA) |
| Tube, connector and cap material | Polyvinyl chloride (PVC) |
| Use | Single-use |
| Sterility | Non-sterile |
| Product code | SLE/CPG/014 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A urine collecting bag receives drainage from a urinary catheter so that staff can monitor output without disturbing the patient. The universal connector on the inlet tube joins the outlet of the catheter, and the protective cap keeps the connector covered until it is attached. The 100 ml markings let nurses read and record the volume collected during a shift.
The reinforced eyelets allow the bag to hang from a bed frame or stand below the level of the bladder, so drainage runs by gravity. The 85–95 cm tube reaches from the patient to the side of the bed without pulling on the catheter. Because the bag is single-use and non-sterile, each facility follows its own protocol on changing and disposal. Health centres that buy disposable lab equipment in India together with ward items can include these bags in the same order.
Jain Scientific Equipments Private Limited trades under the name ScienceLab from Ambala, Haryana, India. The company supplies this urine collecting bag as a sourced hospital consumable and groups it with catheters, dressings and ward items when quoting for health facilities in India and international markets. More about the company is on the ScienceLab profile page.
Items that are used with a urine drainage bag at the bedside:
Browse more ward supplies in Medical Consumables & Dressings.
What is the capacity of the Bag, Urine, Collecting, 2000ml?
The Bag, Urine, Collecting, 2000ml holds up to 2000 ml and is marked with graduations every 100 ml, so staff can read the collected volume directly from the bag when they record a patient's urine output.
How long is the inlet tube on this urine collecting bag?
This urine collecting bag has a transparent, kink-resistant plastic inlet tube 85–95 cm long, ending in a universal connector with a protective cap. The tube, the connector and the cap are all made of PVC.
Is the 2000 ml urine collecting bag sterile?
No. The Bag, Urine, Collecting, 2000ml is supplied non-sterile and is intended for single use. If your protocol calls for a sterile drainage bag, tell us through the contact page before ordering so we can advise on what is available.
Which catheters can be connected to the 2000 ml urine bag?
The Bag, Urine, Collecting, 2000ml has a universal connector for joining catheters that end in a cup connector, such as the Foley and urethral catheters listed on this site. Check the catheter type your ward uses and ask us if you need confirmation.
Who supplies the Bag, Urine, Collecting, 2000ml?
The Bag, Urine, Collecting, 2000ml is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. The company sources the bag and delivers it to hospitals, clinics and procurement agencies in India and international markets.
What should a quotation request for urine collecting bags include?
A quotation request for urine collecting bags should include the number of bags, PVC or EVA preference, the delivery destination and any other catheters or ward consumables you need. Send it through the contact page for a combined reply.
For prices on the Bag, Urine, Collecting, 2000ml, write to us through the ScienceLab contact page or place it in the enquiry cart with the catheters and dressings you need.
Last updated: 24 September 2026
Tube, Suction, L50cm, Sterile, Disposable (Product Code: SLE/CPG/015) is a single-use PVC suction catheter used to clear secretions, blood or other liquids from the pharynx and airways in wards, emergency rooms and theatres. It is a CH16 tube about 50 cm long, with a conical cup connector for a suction pump and an open distal end with two side windows, sterilised with ethylene oxide gas. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospital buyers who need disposable lab equipment in India.
| Parameter | Detail |
|---|---|
| Type | Sterile suction catheter (suction tube), single channel |
| Diameter | CH16 (Charrière / French gauge) |
| Length | Approximately 50 cm |
| Material | Polyvinyl chloride (PVC) |
| Proximal end | Cup connector with conical tip, for connection to a suction pump system |
| Distal end | Open, straight, with two side windows |
| Size identification | Colour code / external diameter visible on the cup connector |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas |
| Use | Single-use, disposable |
| Estimated weight | 0.040 kg |
| Estimated volume | 0.090 dm³ |
| Product code | SLE/CPG/015 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A suction tube removes pus, blood, secretions, food or other liquids that obstruct the pharynx or the airways. It can be passed through the mouth or nose, or through the channel of an endotracheal or tracheotomy tube, while the conical cup connector is attached to the tubing of a suction pump.
CH16 is listed as the most commonly used size, which makes this tube a practical stock item for emergency trolleys, recovery rooms and wards. The colour code on the connector lets staff confirm the size at a glance before opening the pack. Because every tube is single-use, facilities usually order it in quantity as part of a scientific equipment bulk supply.
The trading name ScienceLab belongs to Jain Scientific Equipments Private Limited in Ambala, Haryana, India. It supplies this sterile suction tube as a sourced single-use item and quotes it together with suction pumps, airway devices and other theatre consumables for buyers in India and international markets. Read about the company on the ScienceLab profile page.
Equipment and consumables used with a suction catheter:
For more single-use hospital items, visit Medical Consumables & Dressings.
What size is the Tube, Suction, L50cm, Sterile, Disposable?
The Tube, Suction, L50cm, Sterile, Disposable is a CH16 tube (Charrière / French gauge) with a length of approximately 50 cm. Its colour code and external diameter are shown on the cup connector, so staff can identify the size quickly.
How does the sterile suction tube connect to a suction pump?
The sterile suction tube has a cup connector with a conical tip at its proximal end, which attaches to the tubing of a suction pump system. The distal end is open and straight, with two side windows.
How is the Tube, Suction, L50cm, Sterile, Disposable sterilised?
The Tube, Suction, L50cm, Sterile, Disposable is supplied sterile, and its initial sterilisation method is ethylene oxide gas. It is a single-use, disposable device, so each tube is discarded after one use.
What is the suction tube made of and how much does it weigh?
This suction tube is a single-channel tube made of polyvinyl chloride (PVC). Each piece has an estimated weight of 0.040 kg and an estimated volume of 0.090 dm³, which helps when planning the shipment of large quantities.
Who supplies the Tube, Suction, L50cm, Sterile, Disposable?
The Tube, Suction, L50cm, Sterile, Disposable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources this suction catheter for hospitals, clinics, distributors and procurement agencies in India and international markets.
What should a quote request for suction tubes include?
A quote request for suction tubes should include the quantity, confirmation of the CH16 size and approximately 50 cm length, any suction pumps you also need, and the delivery destination. Send the details through the contact page.
Request pricing for the Tube, Suction, L50cm, Sterile, Disposable on the ScienceLab contact page, or collect it in the enquiry cart with the suction pumps and airway items on your list.
Last updated: 24 September 2026
Tube, Feeding, L40cm, sterile, Disposable (Product Code: SLE/CPG/016) is a single-use PVC enteral feeding tube used to pass nutrients through the mouth or nose into the stomach, including for feeding children, in paediatric wards, neonatal units and nutrition centres. It is about 40–50 cm long, with a Luer connector and stopper, a smooth rounded tip with two side windows and a mark 20 cm from the distal end. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for scientific equipment bulk supply to hospitals and nutrition programmes.
| Parameter | Detail |
|---|---|
| Type | Sterile enteral feeding catheter (gastric tube), single channel |
| Length | Approximately 40–50 cm |
| Marking | Mark at 20 cm from the distal end |
| Proximal end | Connector with Luer tip and stopper, for Luer-tip feeding syringes |
| Distal end | Rounded, smooth, with two side windows |
| Material | Polyvinyl chloride (PVC) |
| Diameter | Expressed in Charrière (French gauge); colour code / external diameter visible on the connector |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas |
| Use | Single-use, disposable |
| Estimated weight | 0.005 kg |
| Estimated volume | 0.099 dm³ |
| Product code | SLE/CPG/016 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A feeding tube carries liquid feeds or nutrients directly into the stomach when a patient cannot take them safely by mouth. This tube is passed through the mouth or nose, and its Luer connector accepts a Luer-tip feeding syringe; the stopper closes the connector between feeds.
The mark 20 cm from the tip gives staff a visible reference point while the tube is placed and checked. The listed size is described as the one most commonly used, and the colour code on the connector shows the diameter at a glance. Buying the tubes and matching Luer-tip syringes from one lab consumables supplier in India helps keep connector types consistent on the ward.
ScienceLab is the name under which Jain Scientific Equipments Private Limited of Ambala, Haryana, is known in the market. The company supplies this sterile feeding tube as a sourced single-use device and can list it with feeding syringes and other nutrition supplies in one quotation for buyers in India and international markets. More on the company is on the ScienceLab profile.
Items that work with a Luer-connector feeding tube:
See all ward consumables in Medical Consumables & Dressings.
How long is the Tube, Feeding, L40cm, sterile, Disposable?
The Tube, Feeding, L40cm, sterile, Disposable is approximately 40–50 cm long and carries a marking 20 cm from its distal end. The rounded, smooth tip has two side windows through which the feed passes into the stomach.
Which syringe fits this sterile feeding tube?
This sterile feeding tube has a Luer-tip connector with a stopper, so it fits feeding syringes with a Luer tip, such as the 50 ml Luer tip feeding syringe listed on this site. Catheter-tip syringes need a tube with a cup (conical) connector instead.
What diameter is the sterile feeding tube?
The listing for the sterile feeding tube expresses diameter in Charrière (French gauge) and shows it by colour code on the connector, but it does not fix one CH size. State the diameter you need in your enquiry and we will confirm availability.
Is the Tube, Feeding, L40cm, sterile, Disposable single-use?
Yes. The Tube, Feeding, L40cm, sterile, Disposable is a disposable, single-use device made of polyvinyl chloride (PVC). It is supplied sterile, and ethylene oxide gas is listed as its initial sterilisation method.
Who supplies the Tube, Feeding, L40cm, sterile, Disposable?
The Tube, Feeding, L40cm, sterile, Disposable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the tube for hospitals, nutrition programmes, distributors and procurement agencies in India and international markets.
What should a quotation request for feeding tubes include?
A quotation request for sterile feeding tubes should give the CH diameter, the quantity, whether you also need Luer-tip feeding syringes, and the delivery destination. Send it through the contact page and ScienceLab will reply with price and availability.
Price the Tube, Feeding, L40cm, sterile, Disposable by writing to us on the ScienceLab contact page, or add it to the enquiry cart together with the feeding syringes you need.
Last updated: 24 September 2026
Tube, ASP/Feed, L125cm, Sterile, Disposable (Product Code: SLE/CPG/017) is a long single-use PVC tube used to aspirate liquids or gases from the stomach and small intestine, or to give feeds, in surgical, paediatric and intensive-care wards. The CH12 tube is about 125 cm long, with a conical cup connector, four side windows and depth marks at 40, 50, 60 and 70 cm. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospital orders and laboratory equipment tenders in India.
| Parameter | Detail |
|---|---|
| Type | Sterile enteral feeding / aspirating catheter, single channel |
| Diameter | CH12 (Charrière / French gauge) |
| Length | Approximately 125 cm |
| Markings | At 40, 50, 60 and 70 cm from the distal end (cardia, stomach, duodenum, jejunum) |
| Proximal end | Cup connector with conical tip, for catheter-tip feeding syringes or a suction pump system |
| Distal end | Open, with four side windows |
| Material | Polyvinyl chloride (PVC) |
| Size identification | Colour code / external diameter visible on the cup connector |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas |
| Use | Single-use, disposable |
| Estimated weight | 0.022 kg |
| Estimated volume | 0.232 dm³ |
| Product code | SLE/CPG/017 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
This tube serves two purposes. Connected to a suction pump system, it aspirates liquids and gases from the stomach, duodenum and small intestine; connected to a catheter-tip (conical) feeding syringe, it is used to feed a child. The conical cup connector accepts both.
The four marks at 40, 50, 60 and 70 cm from the tip correspond to the cardia, stomach, duodenum and jejunum, giving staff a reference for how far the tube has been advanced. At about 125 cm, it is much longer than a standard gastric feeding tube, so wards usually stock it as a separate line. Lab equipment distributors in India supplying surgical wards can quote CH12, the size listed as the most commonly used.
ScienceLab is the trade name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana, India. The company supplies this aspiration and feeding tube as a sourced single-use device for hospitals and aid programmes in India and international markets, and can match it with catheter-tip syringes and suction equipment in the same quotation. Company background is on the ScienceLab profile.
Items used with a cup-connector aspiration and feeding tube:
The complete range is in Medical Consumables & Dressings.
What are the dimensions of the Tube, ASP/Feed, L125cm, Sterile, Disposable?
The Tube, ASP/Feed, L125cm, Sterile, Disposable is a CH12 tube (French gauge) about 125 cm long. Its colour code and external diameter are visible on the cup connector, and it has an open distal end with four side windows.
What do the markings on the aspiration/feeding tube show?
The aspiration/feeding tube has markings at 40, 50, 60 and 70 cm from the distal end. They correspond to the cardia, stomach, duodenum and jejunum, giving a reference for how far the tube has been advanced.
Can the Tube, ASP/Feed, L125cm connect to both a suction pump and a feeding syringe?
Yes. The Tube, ASP/Feed, L125cm, Sterile, Disposable has a cup connector with a conical tip that fits a suction pump system or a catheter-tip (conical) feeding syringe. For Luer-tip syringes, a tube with a Luer connector is the better match.
Is the aspiration/feeding tube sterile?
Yes. The aspiration/feeding tube is supplied sterile, with ethylene oxide gas listed as the initial sterilisation method. It is a disposable, single-use PVC tube with an estimated weight of 0.022 kg and an estimated volume of 0.232 dm³.
Who supplies the Tube, ASP/Feed, L125cm, Sterile, Disposable?
The Tube, ASP/Feed, L125cm, Sterile, Disposable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the tube for hospitals, clinics, distributors and procurement agencies in India and international markets.
What should a quotation request for this tube include?
A quotation request for the Tube, ASP/Feed, L125cm should state the quantity, confirm the CH12 size, list any catheter-tip syringes or suction pumps you also need and give the delivery destination. Use the contact page to send it.
Send a price request for the Tube, ASP/Feed, L125cm, Sterile, Disposable through the ScienceLab contact page, or add it to the enquiry cart along with matching syringes and suction equipment.
Last updated: 24 September 2026
Syringe, Feeding, 50ml, Luer Tip, sterile (Product Code: SLE/CPG/018) is a single-use, three-piece syringe used to give enteral feeds through Luer-connector feeding tubes and for manual aspiration, mainly in neonatal, paediatric and nutrition units. Available in 50 ml or 60 ml capacity, it has a clear, permanently graduated barrel, a centric or eccentric Luer tip and a plunger backstop. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals and buyers sourcing disposable lab equipment in India.
| Parameter | Detail |
|---|---|
| Type | Feeding syringe, Luer tip, 3-piece (barrel, plunger and gasket) |
| Capacity | 50 ml or 60 ml |
| Tip | Luer tip, centric or eccentric |
| Barrel | Clear, with precise graduation in ml; permanent marking, easy to read |
| Plunger | Safe plunger backstop |
| Compatibility | Feeding tubes with Luer tips |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas or gamma radiation |
| Use | Single-use, disposable |
| Estimated weight | 0.040 kg |
| Estimated volume | 0.20 dm³ |
| Product code | SLE/CPG/018 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
This syringe is used for gastroenteral feeding, for drawing liquid or gas out of the stomach by hand, and for manual pharyngeal or tracheal aspiration. Its Luer tip fits feeding tubes with Luer tips, which the listing describes for feeding premature babies, newborns and malnourished infants.
The clear barrel with permanent millilitre graduations lets staff read each feed volume easily, and the plunger backstop helps prevent the plunger from being pulled out of the barrel. Nutrition centres that order through one lab consumables supplier in India can pair it with the matching Luer feeding tube so that every connection on the ward is the same type.
Jain Scientific Equipments Private Limited uses the trading name ScienceLab and works from Ambala, Haryana, India. It supplies this Luer tip feeding syringe as a sourced single-use item for neonatal units, paediatric wards and nutrition programmes in India and international markets. For more about the company, see the ScienceLab profile page.
Tubes and syringes that complete an enteral feeding set:
Find more single-use items in Medical Consumables & Dressings.
What capacity is the Syringe, Feeding, 50ml, Luer Tip, sterile?
The Syringe, Feeding, 50ml, Luer Tip, sterile is offered in 50 ml or 60 ml capacity. Its clear barrel carries precise millilitre graduations with permanent marking, so feed volumes can be read easily. State which capacity you need when you enquire.
Which feeding tubes fit the Luer tip feeding syringe?
The Luer tip feeding syringe fits feeding tubes that have Luer tips, such as the sterile feeding tube with Luer connector listed on this site. For tubes with a cup or conical connector, use the catheter-tip version of this syringe instead.
Is the Syringe, Feeding, 50ml, Luer Tip, sterile supplied sterile?
Yes. The Syringe, Feeding, 50ml, Luer Tip, sterile is supplied sterile, with ethylene oxide gas or gamma radiation listed as the initial sterilisation method. It is a disposable, single-use syringe made of three pieces: barrel, plunger and gasket.
What is the difference between a centric and an eccentric Luer tip?
On a centric Luer tip the nozzle sits in the middle of the barrel end, while on an eccentric tip it is offset towards the edge. This Luer tip feeding syringe is listed with either option, so state your preference when ordering.
What else can the Luer tip feeding syringe be used for?
Besides gastroenteral feeding, the Syringe, Feeding, 50ml, Luer Tip, sterile is listed for manual aspiration of liquid or gas from the stomach and for manual pharyngeal or tracheal aspiration or suction, carried out according to your facility's clinical protocol.
Who supplies the Syringe, Feeding, 50ml, Luer Tip, sterile?
The Syringe, Feeding, 50ml, Luer Tip, sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the syringe for hospitals, nutrition programmes and distributors in India and international markets; enquiries go through the contact page.
For a price on the Syringe, Feeding, 50ml, Luer Tip, sterile, tell us the capacity, tip type and quantity through the ScienceLab contact page, or add it to the enquiry cart.
Last updated: 24 September 2026
Syringe, Feeding, 50ml, Catheter Tip, Sterile (Product Code: SLE/CPG/019) is a single-use syringe with a conical catheter tip, used to give feeds or draw fluid by hand through tubes that end in a cup connector, in wards, intensive care and nutrition programmes. It holds 50 ml or 60 ml and has three pieces (barrel, plunger and gasket), a clear graduated barrel and a plunger backstop. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which quotes it for hospital and lab equipment tenders in India.
| Parameter | Detail |
|---|---|
| Type | Feeding syringe, catheter tip, 3-piece (barrel, plunger and gasket) |
| Capacity | 50 ml or 60 ml |
| Tip | Catheter tip, centric or eccentric |
| Barrel | Clear, with precise graduation in ml; permanent marking for easy reading |
| Plunger | Safe plunger backstop |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas or gamma radiation |
| Use | Single-use, disposable |
| Estimated weight | 0.040 kg |
| Estimated volume | 0.300 dm³ |
| Product code | SLE/CPG/019 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A catheter tip is a long, tapered nozzle that pushes into the cup (funnel) connector found on many enteral and aspiration tubes. That makes this syringe the natural partner for tubes such as the CH12 aspiration/feeding tube, whether the task is giving a feed, drawing liquid or gas from the stomach, or manual pharyngeal or tracheal suction.
The clear barrel is permanently marked in millilitres, so the volume drawn back during aspiration can be read and recorded as easily as a feed volume. With 50–60 ml per fill, larger feeds or aspirates need fewer refills than with small syringes. Aid agencies sourcing ward consumables through lab equipment export from India can order it together with the matching tubes.
ScienceLab is the business name of Jain Scientific Equipments Private Limited, located in Ambala, Haryana, India. For this catheter tip syringe the company acts as a supplier, sourcing it for surgical wards, intensive-care units and field hospitals and quoting it with the tubes it connects to. Buyers in India and international markets can read about the company on the ScienceLab profile.
Tubes with cup connectors and an alternative syringe:
Explore the category Medical Consumables & Dressings for related ward items.
How does the catheter tip syringe differ from a Luer tip syringe?
The Syringe, Feeding, 50ml, Catheter Tip, Sterile has a long conical nozzle that fits cup or funnel connectors on feeding and aspiration tubes. A Luer tip is shorter and narrower and fits Luer connectors, so choose the tip type that matches your tubes.
What capacity is the catheter tip feeding syringe?
The catheter tip feeding syringe holds 50 ml or 60 ml, depending on the version ordered. Its clear barrel has precise millilitre graduations with permanent marking, which makes feed and aspirate volumes easy to read.
Is the Syringe, Feeding, 50ml, Catheter Tip, Sterile a single-use item?
Yes. The Syringe, Feeding, 50ml, Catheter Tip, Sterile is disposable and intended for single use. It is supplied sterile, and its initial sterilisation method is listed as ethylene oxide gas or gamma radiation.
Which procedures is the catheter tip feeding syringe listed for?
The catheter tip feeding syringe is listed for gastroenteral feeding, manual aspiration of liquids or gas from the stomach, and manual pharyngeal or tracheal aspiration or suction. Staff should follow their own clinical protocol for each of these procedures.
Who supplies the Syringe, Feeding, 50ml, Catheter Tip, Sterile?
The Syringe, Feeding, 50ml, Catheter Tip, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the syringe for hospitals, field programmes and distributors in India and international markets.
What should a quote request for catheter tip syringes include?
A quote request for catheter tip syringes should state the capacity (50 ml or 60 ml), centric or eccentric tip, the quantity, any cup-connector tubes needed with them and the delivery destination. Send it through the contact page.
Ask for pricing on the Syringe, Feeding, 50ml, Catheter Tip, Sterile via the ScienceLab contact page, or add it to the enquiry cart with the tubes on your list.
Last updated: 24 September 2026
Catheter, Foley, Sterile, Disposable (Product Code: SLE/CPG/020) is a 2-way urethral balloon catheter used to drain urine from the bladder during medium- or long-term catheterisation in hospital wards, theatres and maternity units. This CH18 catheter is 30–40 cm long, made of silicone-coated natural latex, with a 5–15 ml balloon and a cup connector for a urine bag. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for bulk hospital orders and lab equipment export from India.
| Parameter | Detail |
|---|---|
| Type | Urethral catheter with balloon: Foley catheter, 2-way, Nelaton tip |
| Diameter | CH18 (Charrière / French gauge) |
| Length | 30–40 cm |
| Balloon capacity | 5–15 ml |
| Material | Natural latex, silicone coated |
| Drainage channel | Central channel; straight, rounded distal end with lateral eyes; proximal cup connector for a urine bag |
| Inflation channel | Side channel ending in a non-return valve with Luer tip connector |
| Size identification | Colour code / external diameter visible on the connector |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas |
| Use | Single-use |
| Estimated weight | 0.030 kg |
| Estimated volume | 0.237 dm³ |
| Product code | SLE/CPG/020 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A Foley catheter is introduced through the urethra into the bladder and held in place by a small balloon near its tip, so that urine drains continuously into a collection bag. The two channels explain the "2-way" name: the central channel carries urine to the cup connector, while the side channel is used to inflate the balloon through its non-return Luer valve.
The listing gives handling notes: insert with strict aseptic technique, inflate the balloon with water or physiological saline, and, if lubrication is needed, use a substance that will not physically or chemically alter the catheter (sterile water if necessary). Because the catheter is made of natural latex with a silicone coating, state in your enquiry if your facility needs a latex-free alternative. Hospitals planning catheter stock as part of a scientific equipment bulk supply can order it with matching urine bags.
Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, is based in Ambala, Haryana, India. It supplies this Foley catheter as a sourced sterile item for hospitals, maternity units and health programmes in India and international markets, alongside urine bags and other urology consumables. More details are on the ScienceLab profile page.
Items needed for catheterisation and drainage:
More urology and ward items are in Medical Consumables & Dressings.
What size is the Catheter, Foley, Sterile, Disposable?
The Catheter, Foley, Sterile, Disposable is a CH18 catheter (Charrière / French gauge) with a length of 30–40 cm and a balloon capacity of 5–15 ml. The colour code on its connector shows the external diameter.
What is the Foley catheter made of?
This Foley catheter is made of natural latex with a silicone coating. If your facility requires a latex-free catheter, mention it in your enquiry through the contact page so we can discuss the options before you order.
How is the balloon of the Foley catheter inflated?
The balloon of the Foley catheter is inflated through the side channel, which ends in a non-return valve with a Luer tip connector. The listing states that the balloon should be filled with water or physiological saline, within its 5–15 ml capacity.
Is the Catheter, Foley, Sterile, Disposable single-use?
Yes. The Catheter, Foley, Sterile, Disposable is supplied sterile, with ethylene oxide gas as the initial sterilisation method, and is intended for single use. It should be inserted with strict aseptic technique, as stated in its instructions for use.
Which urine bag fits the Foley catheter?
The proximal end of the Foley catheter has a cup connector that allows it to be connected to a urine bag, such as the 2000 ml urine collecting bag with universal connector listed on this site. Ask us if you need both items quoted together.
Who supplies the Catheter, Foley, Sterile, Disposable?
The Catheter, Foley, Sterile, Disposable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources this catheter for hospitals, clinics, distributors and procurement agencies in India and international markets; send enquiries through the contact page.
To price the Catheter, Foley, Sterile, Disposable, send the quantity and size through the ScienceLab contact page, or add it to the enquiry cart with urine bags and gloves.
Last updated: 24 September 2026
Catheter, Urethral, Sterile, disposable (Product Code: SLE/CPG/021) is a Nelaton-tip urinary catheter without a balloon, used to drain urine from the bladder for short-term catheterisation in wards, emergency rooms and clinics. This CH14 PVC catheter is 30–40 cm long, with a soft, rounded closed tip, two lateral eyes and a colour-coded cup connector for a urine bag. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals and to lab equipment distributors in India.
| Parameter | Detail |
|---|---|
| Type | Urethral catheter without balloon, Nelaton tip |
| Diameter | CH14 (Charrière / French gauge) |
| Length | 30–40 cm |
| Material | Polyvinyl chloride (PVC) |
| Distal end | Atraumatic, soft, rounded and closed, with 2 lateral eyes |
| Proximal end | Colour-coded cup connector, allowing connection to a urine bag |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas |
| Use | Single-use; short-term catheterisation |
| Estimated weight | 0.012 kg |
| Estimated volume | 0.128 dm³ |
| Product code | SLE/CPG/021 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Unlike a Foley catheter, a Nelaton catheter has no balloon and is not retained in the bladder: it is passed in, used to drain urine and then removed, which is why it is listed for short-term catheterisation. The closed, rounded tip is designed to be atraumatic, while the two lateral eyes let urine enter the catheter.
The instructions for use call for strict aseptic technique; if lubrication is needed, the substance must not physically or chemically alter the catheter, and sterile water can be used. The cup connector joins a urine bag when the drained volume needs to be collected and measured. Hospitals that stock disposable lab equipment in India for their wards often keep this CH14 catheter next to a Foley catheter for longer-term drainage.
The ScienceLab brand is operated by Jain Scientific Equipments Private Limited of Ambala, Haryana, India. The company supplies this Nelaton urethral catheter as a sourced sterile consumable and delivers it with other urology and ward items to buyers in India and international markets. The ScienceLab profile gives more background on the company.
Consumables used before, during and after short-term catheterisation:
See the wider range in Medical Consumables & Dressings.
What size is the Catheter, Urethral, Sterile, disposable?
The Catheter, Urethral, Sterile, disposable is a CH14 catheter (Charrière / French gauge) with a length of 30–40 cm. Its cup connector is colour coded, so staff can identify the size at a glance when choosing a catheter.
How does this urethral catheter differ from a Foley catheter?
This urethral catheter has a Nelaton tip and no balloon, so it is intended for short-term catheterisation and is not retained in the bladder. A Foley catheter has an inflatable balloon that holds it in place for medium- or long-term drainage.
What is the Nelaton urethral catheter made of?
The Nelaton urethral catheter is made of polyvinyl chloride (PVC) and has an atraumatic, soft, rounded closed distal end with two lateral eyes. Each catheter has an estimated weight of 0.012 kg and an estimated volume of 0.128 dm³.
Is the Catheter, Urethral, Sterile, disposable supplied sterile?
Yes. The Catheter, Urethral, Sterile, disposable is supplied sterile, with ethylene oxide gas listed as the initial sterilisation method, and it is for single use only. Its instructions call for strict aseptic technique during insertion.
Can the urethral catheter be connected to a urine bag?
Yes. The proximal end of the urethral catheter has a cup connector that allows it to be connected to a urine bag, such as the 2000 ml urine collecting bag listed on this site, when the drained urine needs to be collected.
Who supplies the Catheter, Urethral, Sterile, disposable?
The Catheter, Urethral, Sterile, disposable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the catheter for hospitals, clinics and distributors in India and international markets; enquiries can be sent through the contact page.
For prices on the Catheter, Urethral, Sterile, disposable, write to us via the ScienceLab contact page or add it to the enquiry cart together with urine bags and gloves.
Last updated: 24 September 2026
Compress, Gauze, 10x10cm, Sterile (Product Code: SLE/DDS/01) is a folded, sterile cotton gauze swab used to clean wounds, apply disinfectant to healthy skin and protect wounds in clinics, wards, first-aid rooms and theatres. Each 10 x 10 cm compress has 12 folds of 100% cotton absorbent gauze (17 threads/cm², 23 g/m²), and the listed pack holds 5. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospital wards and first aid box stock in school and college labs across India.
| Parameter | Detail |
|---|---|
| Type | Gauze compress with surgical folding (no free threads visible after folding or when the first outer fold is opened) |
| Size | Approx. 10 x 10 cm, folded |
| Number of folds (thickness) | 12 |
| Material | Absorbent gauze, 100% cotton; bleached, purified textile, plain weave |
| Gauze type | 17 threads/cm²; grammage approx. 23 g/m² |
| Thread count | Warp 95–105 threads/dm; weft 66–74 threads/dm |
| X-ray | Non-detectable by X-ray |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas or ionising radiation |
| Use | Disposable |
| Pack | 5 compresses |
| Estimated weight | 0.020 kg |
| Estimated volume | 0.040 dm³ |
| Product code | SLE/DDS/01 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Gauze compresses are the everyday dressing material of wards and clinics: they are used to clean wounds, to apply disinfectant to healthy skin before a procedure and as a protective layer over a wound. Surgical folding tucks the cut edges inside, so no loose threads show after folding or when the first fold is opened.
With 12 folds, each 10 x 10 cm compress forms a thick, absorbent pad, and a pack of 5 keeps several sterile swabs together for one dressing procedure. Because this compress is non-detectable by X-ray, theatres that require X-ray-detectable swabs for counting should say so in their enquiry. Clinics that buy from one lab consumables supplier in India can order these compresses together with bandages and tape.
Jain Scientific Equipments Private Limited trades as ScienceLab from Ambala, Haryana, India. The company supplies these sterile gauze compresses as a sourced dressing product and quotes them with bandages, tapes and other wound-care items for hospitals, clinics and relief programmes in India and international markets. Learn more on the ScienceLab company profile.
Dressing items that are used with gauze compresses:
All dressings are grouped in Medical Consumables & Dressings.
How many compresses are in a pack of the Compress, Gauze, 10x10cm, Sterile?
The Compress, Gauze, 10x10cm, Sterile is listed as a pack of 5 compresses. Each compress measures approximately 10 x 10 cm when folded and has 12 folds, giving a thick absorbent pad for cleaning or covering a wound.
What is the sterile gauze compress made of?
This sterile gauze compress is made of absorbent gauze, 100% cotton, in a bleached and purified plain-weave textile. The gauze has 17 threads/cm² and a grammage of about 23 g/m², with 95–105 warp and 66–74 weft threads/dm.
Is the sterile gauze compress detectable by X-ray?
No. The sterile gauze compress is listed as non-detectable by X-ray. If your theatre protocol requires X-ray-detectable swabs for counting, state this in your enquiry so we can advise on a suitable product before you order.
How is the Compress, Gauze, 10x10cm, Sterile sterilised?
The Compress, Gauze, 10x10cm, Sterile is supplied sterile, and its initial sterilisation method is ethylene oxide gas or ionising radiation. It is a disposable dressing that is discarded after use.
What does surgical folding mean on a gauze compress?
Surgical folding means the gauze compress is folded so that no free threads are visible after folding or when the first outer fold is opened. On this 10 x 10 cm sterile compress it keeps the cut edges tucked inside during wound care.
Who supplies the Compress, Gauze, 10x10cm, Sterile?
The Compress, Gauze, 10x10cm, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources these compresses for hospitals, clinics, schools and aid programmes in India and international markets; send enquiries via the contact page.
To get a quotation for the Compress, Gauze, 10x10cm, Sterile, send the number of packs through the ScienceLab contact page, or add it to the enquiry cart with your other dressings.
Last updated: 24 September 2026
Compress, Paraffin, 10x10cm, Sterile (Product Code: SLE/DDS/02) is a sterile, non-adherent wound dressing of wide-mesh cotton gauze impregnated with soft paraffin, used in the treatment of wounds and especially burns in hospitals, burn units and clinics. Each compress measures about 10 x 10 cm, the listed box holds 10, and the dressing does not stick to the wound, so exudate can pass through. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of scientific equipment bulk supply for health services.
| Parameter | Detail |
|---|---|
| Type | Paraffin gauze compress (wound dressing) |
| Size | Approx. 10 x 10 cm |
| Construction | Elastic netting material with large mesh, impregnated with soft paraffin-based material |
| Netting material | Absorbent gauze, 100% cotton |
| X-ray | Non-detectable by X-ray |
| Sterility | Sterile; initial sterilisation by ethylene oxide gas or ionising radiation |
| Use | Disposable |
| Pack | Box of 10 |
| Estimated weight | 0.140 kg |
| Estimated volume | 0.468 dm³ |
| Product code | SLE/DDS/02 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A paraffin gauze compress is laid directly on the wound as the contact layer. The soft paraffin coating keeps the dressing from sticking to the wound bed, and the large mesh lets exudate or pus pass through to an absorbent layer above, which is why the listing highlights its use on burns.
The listing describes the dressing as cicatrising and warns against using it with local antibiotics, as this may lead to the development of resistant strains. A dry gauze compress and a bandage are normally placed over it to absorb fluid and hold it in position. Burn units and clinics that buy through a lab equipment distributor in India can order it by the box of 10.
ScienceLab is the trading name used by Jain Scientific Equipments Private Limited in Ambala, Haryana, India. The company supplies this paraffin gauze compress as a sourced wound-care product for hospitals, burn units and humanitarian programmes in India and international markets, and can quote it together with the secondary dressings it is used with. See the ScienceLab profile for company details.
Dressings that complete a burn or wound dressing:
Other wound-care items are in Medical Consumables & Dressings.
What is the Compress, Paraffin, 10x10cm, Sterile used for?
The Compress, Paraffin, 10x10cm, Sterile is a special dressing for the treatment of wounds, especially burns. It does not stick to the wound, allowing exudation or suppuration to pass through, and its listing describes it as having cicatrising properties.
How many paraffin compresses are in a box?
The paraffin gauze compress is listed in a box of 10, and each compress measures approximately 10 x 10 cm. The listed estimated weight is 0.140 kg and the estimated volume is 0.468 dm³, useful figures when planning a shipment.
Can the paraffin compress be used with antibiotic ointments?
No. The listing for the Compress, Paraffin, 10x10cm, Sterile advises against using it with local antibiotics, as this may lead to the development of resistant strains. Follow your clinical protocol and the instructions supplied with the dressing.
What is the paraffin gauze compress made of?
The paraffin gauze compress is an elastic netting of absorbent 100% cotton gauze with a large mesh, impregnated with a soft paraffin-based material. It is non-detectable by X-ray and sterilised initially with ethylene oxide gas or ionising radiation.
What goes over a paraffin gauze compress?
A paraffin gauze compress is usually covered with an absorbent layer, such as a sterile gauze compress, and held with a gauze or elastic bandage. ScienceLab can quote the Compress, Paraffin, 10x10cm, Sterile together with these items in one enquiry.
Who supplies the Compress, Paraffin, 10x10cm, Sterile?
The Compress, Paraffin, 10x10cm, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources this dressing for hospitals, burn units, distributors and relief programmes in India and international markets; enquiries go through the contact page.
Request a price for the Compress, Paraffin, 10x10cm, Sterile by sending the number of boxes through the ScienceLab contact page, or add it to the enquiry cart with the bandages you need.
Last updated: 24 September 2026
Gauze, Roll, 90cmx100m, Non-Sterile (Product Code: SLE/DDS/03) is a bulk roll of absorbent 100% cotton gauze used by hospitals and health centres to cut and fold their own compresses and dressings. The roll is 100 m long and 65–90 cm wide, with a selvedge edge, a plain weave of 17 threads/cm² and a grammage of about 23 g/m², and it comes non-sterile. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospital stores and lab equipment tenders in India.
| Parameter | Detail |
|---|---|
| Type | Non-sterile gauze roll with selvedge (gauze folded in zigzag is listed as an alternative) |
| Length | 100 m |
| Width | 65–90 cm |
| Material | Absorbent gauze, 100% cotton; bleached, purified textile, plain weave |
| Gauze type | 17 threads/cm²; grammage approx. 23 g/m² |
| Thread count | Warp 95–105 threads/dm; weft 66–74 threads/dm |
| X-ray | Non-detectable by X-ray |
| Sterility | Non-sterile |
| Use | Single use |
| Product code | SLE/DDS/03 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A gauze roll is the raw material from which health facilities make their own compresses, swabs and dressing pads. Staff cut the gauze to size and fold it, and the selvedge along the edges keeps the roll from fraying while it is unwound and cut.
Because the roll is non-sterile, compresses made from it are either used for non-sterile tasks or sterilised by the facility according to its own procedures before use on wounds. The roll has the same listed gauze specification as the sterile 10 x 10 cm compress in this range: 100% cotton, 17 threads/cm² and about 23 g/m². Central stores that source from one lab consumables supplier in India can combine the roll with cotton wool and bandages in a single order.
Jain Scientific Equipments Private Limited carries out its trade as ScienceLab from Ambala, Haryana, India. It supplies this non-sterile gauze roll as a sourced bulk dressing material to hospital stores, health centres and relief organisations in India and international markets. Company information is available on the ScienceLab profile page.
Other dressing materials and equipment for a dressing room:
Browse all dressings in Medical Consumables & Dressings.
What size is the Gauze, Roll, 90cmx100m, Non-Sterile?
The Gauze, Roll, 90cmx100m, Non-Sterile is 100 m long, with a listed width of 65 to 90 cm. State the exact width you need in your enquiry, and whether you prefer a roll or gauze folded in zigzag, which is listed as an alternative.
What type of gauze is the non-sterile gauze roll made of?
The non-sterile gauze roll is absorbent gauze of 100% cotton, a bleached and purified plain-weave textile. It has 17 threads/cm², a grammage of about 23 g/m², 95–105 warp threads/dm and 66–74 weft threads/dm.
Is the Gauze, Roll, 90cmx100m, Non-Sterile sterile?
No. The Gauze, Roll, 90cmx100m, Non-Sterile is supplied non-sterile and is intended for making compresses at health-facility level. If you need ready-to-use sterile dressings, see the sterile 10 x 10 cm gauze compress or ask us through the contact page.
Is the gauze roll detectable by X-ray?
No. The gauze roll is listed as non-detectable by X-ray, so compresses cut from this non-sterile gauze roll carry no X-ray-detectable marker. Theatres that need X-ray-detectable swabs should specify this in their enquiry before ordering.
Who supplies the Gauze, Roll, 90cmx100m, Non-Sterile?
The Gauze, Roll, 90cmx100m, Non-Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the roll for hospitals, health centres, distributors and relief organisations in India and international markets.
What does a quotation for gauze rolls need?
A quotation for gauze rolls needs the number of 100 m rolls, the width within 65–90 cm, the roll or zigzag-folded format and the delivery destination. Send the details via the contact page and ScienceLab will reply with price and availability.
For a quotation on the Gauze, Roll, 90cmx100m, Non-Sterile, send your width and number of rolls through the ScienceLab contact page, or add it to the enquiry cart with other dressing supplies.
Last updated: 24 September 2026
Bandage, Gauze, 8cmx4m, Roll (Product Code: SLE/DDS/04) is a non-elastic, non-adhesive cotton gauze bandage used to hold wound dressings and IV placement dressings in hospitals, clinics and first-aid rooms. Nurses and first-aid staff use it as a light, absorbent roll of 100% cotton gauze about 7.5–8 cm wide and 4–5 m long, with selvedge edges, supplied non-sterile for single use. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Gauze bandage roll with selvedge; non-elastic, non-adhesive |
| Width | 7.5–8 cm |
| Length | 4–5 m |
| Material | Absorbent gauze, 100% cotton; bleached, purified textile, plain weave |
| Weight | Approx. 27.5 g/m² |
| Thread count | Warp 12 threads/cm; weft 8 threads/cm |
| X-ray | Non-detectable by X-ray |
| Sterility | Non-sterile |
| Use | Single use |
| Product code | SLE/DDS/04 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A gauze bandage is wound over a compress or dressing pad to keep it in place on a wound, or around an IV placement site to secure the dressing there. Because this roll has no elastic and no adhesive, it holds the dressing without squeezing the limb and without sticking to skin or hair.
The original product description notes that this width and length were chosen as the size most commonly used, which makes it a practical stock item for wards, health posts and a school or lab first aid box. As the roll is non-sterile, place a sterile compress against an open wound first and use the bandage only as the outer retaining layer, then secure the free end with medical tape.
Jain Scientific Equipments Private Limited, which trades under the name ScienceLab, supplies this gauze bandage from Ambala, Haryana, India. The company sources it for hospitals, clinics, school and lab first-aid rooms, distributors and aid programmes in India and international markets, alongside the other dressings in its medical consumables range. Read more about the company on the ScienceLab profile page.
Items used together with a gauze bandage when dressing a wound or securing an IV site:
See every item in Medical Consumables & Dressings.
What size is the Bandage, Gauze, 8cmx4m, Roll?
The Bandage, Gauze, 8cmx4m, Roll is listed at a width of 7.5 to 8 cm and a length of 4 to 5 m per roll. The source description notes that this size was selected as the one most commonly used for wound and IV dressings.
Is the gauze bandage elastic or adhesive?
No. The 8 cm gauze bandage roll is non-elastic and non-adhesive, so it holds a dressing in place without stretching or sticking to the skin. Where stretch is needed, the elastic crepe bandage in the same range is the usual alternative.
What is the gauze bandage made of?
The Bandage, Gauze, 8cmx4m, Roll is made of absorbent 100% cotton gauze: a bleached, purified plain-weave textile of about 27.5 g/m², with 12 warp threads/cm and 8 weft threads/cm, finished with selvedge edges.
Is the Bandage, Gauze, 8cmx4m, Roll sterile?
No. The Bandage, Gauze, 8cmx4m, Roll is supplied non-sterile and is intended for single use. Place a sterile compress directly over an open wound and use this gauze bandage as the outer layer that holds the compress in position.
Is the gauze bandage visible on X-ray?
No. The 8 cm gauze bandage is listed as non-detectable by X-ray, so it carries no X-ray marker thread. Theatre teams that require X-ray-detectable gauze should state that requirement when they ask ScienceLab for a quotation.
Who supplies the Bandage, Gauze, 8cmx4m, Roll?
The Bandage, Gauze, 8cmx4m, Roll is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India, to hospitals, clinics, schools, distributors and relief buyers in India and international markets.
What does a quotation for gauze bandages need?
A quotation for the 8 cm gauze bandage needs the number of rolls, any companion items such as sterile compresses or medical tape, and the delivery destination. Send these details through the contact page and ScienceLab will confirm price and availability.
To receive a price for the Bandage, Gauze, 8cmx4m, Roll, send the number of rolls and your delivery location through the ScienceLab contact page, or add the bandage to the enquiry cart together with the other dressings you need.
Last updated: 24 September 2026
Bandage, Elastic, 7.5cmx5m, Roll (Product Code: SLE/DDS/05) is a reusable cotton crepe stretch bandage used to bandage heads, limbs and difficult-to-dress wounds in hospitals, clinics and first-aid settings. Its warp combines high-twist and normal-twist cotton threads, so the roll stretches from about 3 m to about 5 m (elasticity approx. 150%), and it comes with clips for fastening. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Crepe stretch bandage roll with clips; non-adhesive |
| Width | 7.5–8 cm |
| Length | Approx. 3 m unstretched; approx. 5 m stretched |
| Elasticity | Approx. 150% |
| Material | 100% cotton, unbleached colour; crepe produced by combining high-twist and normal-twist cotton threads in the warp |
| Warp | 120 threads/dm, unbleached cotton, high-twist |
| Weft | 54 ± 2 threads/dm, unbleached cotton |
| X-ray | Non-detectable by X-ray |
| Sterility | Non-sterile |
| Use | Reusable |
| Product code | SLE/DDS/05 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
An elastic crepe bandage stretches as it is applied and then draws back, so it follows the shape of a head, knee, elbow or ankle where a flat gauze bandage tends to slip. That makes it the usual choice for holding dressings on awkward, moving areas and for bandaging limbs, while the cotton construction keeps it soft against the skin.
Apply it in even, overlapping turns with moderate tension and fasten the end with the clips supplied. After bandaging a limb, check that fingers or toes stay warm and pink, because any stretch bandage wound too tightly can restrict circulation. Schools that assemble a first aid training kit often include an elastic bandage so that students can practise limb bandaging, and the reusable roll suits that purpose.
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana, India. The company supplies this elastic crepe bandage as part of its sourced dressing range to hospitals, health centres, school and sports first-aid rooms and distributors in India and international markets. Company background is on the ScienceLab profile page.
Products often ordered with an elastic crepe bandage:
Browse the full Medical Consumables & Dressings range.
How much does the Bandage, Elastic, 7.5cmx5m, Roll stretch?
The Bandage, Elastic, 7.5cmx5m, Roll measures about 3 m when relaxed and about 5 m when fully stretched, an elasticity of approximately 150%. Its listed width is 7.5 to 8 cm.
What is the elastic bandage made of?
The elastic bandage is 100% unbleached cotton crepe. Its warp has 120 threads/dm and combines high-twist with normal-twist cotton threads, which produces the stretch, and its weft has 54 ± 2 threads/dm of unbleached cotton.
Is the Bandage, Elastic, 7.5cmx5m, Roll reusable?
Yes. The Bandage, Elastic, 7.5cmx5m, Roll is listed as reusable, unlike the single-use gauze bandage in the same range. It is supplied non-sterile, so any reuse should follow the hygiene procedure of the hospital, clinic or first-aid room using it.
How is the elastic bandage fastened?
The elastic bandage roll comes with clips that hold the free end once the bandage has been applied. The bandage itself is non-adhesive, so a strip of medical tape can be used instead if a clip is lost.
Is the crepe bandage sterile or X-ray detectable?
No on both counts. The 7.5 cm crepe bandage is non-sterile and non-detectable by X-ray. Place a sterile compress under it when covering an open wound, and mention any X-ray-detectable requirement in your enquiry.
Who supplies the Bandage, Elastic, 7.5cmx5m, Roll?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Bandage, Elastic, 7.5cmx5m, Roll to hospitals, clinics, schools, sports facilities and distributors in India and international markets.
What should a quotation request for elastic bandages include?
A quotation request for the 7.5 cm elastic bandage should include the number of rolls, any gauze compresses or tape needed with it, and the delivery address or port. Send it through the contact page and ScienceLab will reply with price and availability.
For pricing on the Bandage, Elastic, 7.5cmx5m, Roll, share your quantity through the ScienceLab contact page or place it in the enquiry cart with any other first-aid consumables.
Last updated: 24 September 2026
Medical Tape, Perforated, 10cmx5m, Roll (Product Code: SLE/DDS/06) is a perforated adhesive textile tape used to fix wound dressings, IV placements and medical tubing to the skin in wards, clinics and first-aid rooms. The 10 cm wide, 5 m long strip of woven acetate taffeta is non-stretchable, tears by hand and carries a rubber, resin and lanolin adhesive under an easily removed polyethylene liner. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Medical adhesive tape, perforated, roll |
| Width | 10 cm |
| Length | 5 m |
| Backing | Aerated and/or perforated textile strip of woven acetate taffeta, impregnated with adhesive |
| Adhesive | Mixture of rubber, resins and lanolin; traditionally incorporates zinc oxide |
| Liner | Easily detachable protective polyethylene film |
| Handling | Non-stretchable; can be torn by hand |
| Water | Impermeable to water |
| Skin contact | High cutaneous tolerance; specified to adhere strongly yet be removable without significant skin lesion |
| Colour | White or flesh coloured |
| Sterility | Non-sterile |
| Use | Single use |
| Product code | SLE/DDS/06 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Adhesive tape is the fixing layer of most dressings: short strips hold a compress on the skin, anchor the end of a bandage, or keep an IV placement and its tubing from pulling. The 10 cm width lets one strip cover the whole edge of a compress, and because the tape tears cleanly by hand, staff can prepare lengths without reaching for scissors.
For good adhesion, apply the strip to clean, dry skin and press it down along its length; when changing the dressing, peel it back slowly while supporting the skin. Anyone with a known sensitivity to rubber or lanolin should check the adhesive composition before use. Hospitals and colleges that buy from one lab consumables supplier in India can add the tape to the same enquiry as their gauze and bandages.
Jain Scientific Equipments Private Limited operates as ScienceLab from Ambala, Haryana, India, and supplies this perforated medical tape as part of a sourced range of dressings and ward consumables. Hospitals, clinics, nursing schools and distribution businesses in India and international markets can order it together with other items from the same range. See the ScienceLab profile page for company details.
Dressing materials and IV items that this tape is used to secure:
View all products in Medical Consumables & Dressings.
What size is the Medical Tape, Perforated, 10cmx5m, Roll?
The Medical Tape, Perforated, 10cmx5m, Roll is 10 cm wide and 5 m long. It can be torn by hand into shorter strips, so a single roll serves many dressing changes on a ward or in a first-aid room.
What adhesive does the perforated medical tape use?
The perforated medical tape uses an adhesive made from a mixture of rubber, resins and lanolin, which traditionally incorporates zinc oxide. It is specified for high skin tolerance, strong adhesion and removal without significant skin lesion.
Is the medical tape waterproof?
Yes. The Medical Tape, Perforated, 10cmx5m, Roll is listed as impermeable to water, while its woven acetate taffeta strip is aerated or perforated. The tape is also non-stretchable, so it does not slacken once a dressing has been fixed.
What colour is the perforated medical tape?
The listing gives the colour of the perforated medical tape as white or flesh coloured. Please state your preference when you enquire, and ScienceLab will confirm which colour can be supplied for your order.
Is the Medical Tape, Perforated, 10cmx5m, Roll sterile?
No. The Medical Tape, Perforated, 10cmx5m, Roll is non-sterile and for single use. It is intended to fix dressings, IV placements and tubing rather than to touch an open wound, so a sterile compress should sit between the wound and the tape.
Who supplies the perforated medical tape?
The perforated medical tape is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources it for hospitals, clinics, nursing and medical colleges, and distributors in India and international markets.
How do I order the Medical Tape, Perforated, 10cmx5m, Roll?
To order the Medical Tape, Perforated, 10cmx5m, Roll, send the number of rolls, the preferred colour and the delivery destination through the contact page. ScienceLab will reply with a quotation covering price and availability.
Ask for a price on the Medical Tape, Perforated, 10cmx5m, Roll via the ScienceLab contact page, or collect it with gauze, bandages and compresses in the enquiry cart and send one combined request.
Last updated: 24 September 2026
Blanket, Survival, 220x140cm (Product Code: SLE/DDS/07) is a lightweight wrap-around blanket of non-stretch polyester film used to protect casualties and patients against cold, heat, wind and rain in emergency care, transport and first-aid kits. One side is silver coated and reflects up to 90% of radiated heat, and the film is about 12 µm thick, wind and waterproof, rot proof and flexible in freezing temperatures. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Size | Rectangular; length approx. 220 cm, width approx. 140 cm |
| Thickness | Approx. 12 µm |
| Material | Non-stretch polyester film |
| Coating | One side silver coated; reflects up to 90% of radiated heat |
| Weather resistance | Wind proof, waterproof and rot proof |
| Low temperature | Stays flexible in freezing temperatures |
| Construction | Lightweight, flexible wrap-around blanket; easy to unfold, strong, tear resistant |
| Sterility | Non-sterile |
| Use | Single use |
| Product code | SLE/DDS/07 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A survival blanket is wrapped around a person to cut down heat exchange with the surroundings – for example a casualty waiting outdoors for transport, or a patient being moved between buildings in bad weather. The direction of the silver coating sets the effect: facing outward, it reflects heat away and shields the person from hot surroundings; facing inward, it preserves body heat and keeps out wind and humidity.
Because the film is light and folds flat, the blanket is easy to keep in a first aid box in a lab, a school bus or a field kit. Unfold it fully, wrap it closely and tuck the edges in to reduce draughts. If necessary it can be cut into smaller pieces for children and newborns, as the product description notes.
The survival blanket is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, from Ambala, Haryana, India. It is sourced for emergency services, hospitals, schools, relief organisations and distributors in India and international markets, and can be ordered together with the first-aid kits and dressings in the same catalogue. Visit the ScienceLab profile page to learn more about the company.
Items that go with a survival blanket in emergency and first-aid care:
More emergency and ward supplies are listed under Medical Consumables & Dressings.
How big is the Blanket, Survival, 220x140cm?
The Blanket, Survival, 220x140cm is a rectangle of approximately 220 cm by 140 cm, made of polyester film about 12 µm thick. If necessary, the blanket can be cut into smaller pieces for children and newborns.
Which side of the survival blanket should face the body?
It depends on the aim. To keep a person warm, turn the silver-coated side of the survival blanket inward to preserve body heat; to shield against heat, turn it outward so that it reflects heat away from the person.
How much heat does the survival blanket reflect?
The silver-coated side of the survival blanket reflects up to 90% of radiated heat, according to its specification. The polyester film is also wind proof, waterproof and rot proof, and it stays flexible in freezing temperatures.
Is the Blanket, Survival, 220x140cm reusable?
No. The Blanket, Survival, 220x140cm is specified for single use and is supplied non-sterile. Although the film is strong and tear resistant, a used blanket should be replaced so that each first-aid kit always carries a fresh one.
Who supplies the Blanket, Survival, 220x140cm?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Blanket, Survival, 220x140cm to emergency services, hospitals, schools, relief agencies and distributors in India and international markets.
How can I get a price for survival blankets?
To get a price for survival blankets, send the quantity and delivery destination through the contact page, and mention whether they are to be packed into first-aid kits. ScienceLab replies with a quotation and current availability.
Request a quotation for the Blanket, Survival, 220x140cm through the ScienceLab contact page, or add it to the enquiry cart alongside first-aid kits and dressings for a combined quote.
Last updated: 24 September 2026
Infusion Arm Splint, Foldable, Adult (Product Code: SLE/DDS/08) is a foldable plastic splint used to hold an adult patient’s arm in place during continuous intravenous infusions in hospital wards and treatment rooms. Its length extends from 43 to 53 cm, adjustable straps fix the arm outstretched in pronation or supination, and an optional strap/fixator can attach it to a bed. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Foldable infusion arm splint |
| Patient size | Adults |
| Length | Adjustable; extendable from 43 to 53 cm |
| Arm fixation | Adjustable straps |
| Bed attachment | Optional strap/fixator available |
| Arm position | Keeps the arm outstretched and fixed, in pronation or supination |
| Material | Non-toxic, non-allergic plastic |
| Cleaning | Suitable for cleaning with hospital-grade disinfection products |
| Product code | SLE/DDS/08 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
During a long infusion, bending the elbow or wrist can kink the line or disturb the IV placement. The infusion arm splint helps keep the arm outstretched and in a fixed position, which is what nursing staff need when a line has to stay in place for hours, and its straps hold the forearm without tape wound around the limb.
Staff choose pronation (palm down) or supination (palm up) to suit the infusion site, extend the splint within its 43–53 cm range to match the arm, then close the straps. For a restless patient, the optional fixator can anchor the splint to the bed. Hospitals preparing a hospital or lab equipment tender in India can list the splint with giving sets and infusion stands in the same schedule.
ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, India, supplies this adult infusion arm splint to hospitals, nursing homes, medical colleges and distributors in India and international markets. It forms part of the company’s sourced range of ward and IV consumables. More about the company is on the ScienceLab profile page.
Items used alongside an arm splint during an intravenous infusion:
See the complete Medical Consumables & Dressings category.
What length is the Infusion Arm Splint, Foldable, Adult?
The Infusion Arm Splint, Foldable, Adult has an adjustable length that extends from 43 to 53 cm, so it can be set to suit different adult arms. Because it is foldable, it takes up little space in a ward store when not in use.
How is the arm fixed to the infusion splint?
The arm is fixed to the infusion splint with adjustable straps. An optional strap/fixator is also available for attaching the splint to a bed, which helps with restless patients; ask ScienceLab to include it in your quotation if you need it.
Can the arm be held palm up or palm down?
Yes. The Infusion Arm Splint, Foldable, Adult keeps the arm outstretched and fixed in either pronation (palm down) or supination (palm up), so staff can position the arm to suit the infusion site.
How is the infusion arm splint cleaned?
The infusion arm splint is made of non-toxic, non-allergic plastic that is suitable for cleaning with hospital-grade disinfection products. Clean and dry it between patients according to the facility’s own cleaning procedure.
Is the arm splint suitable for children?
No. The Infusion Arm Splint, Foldable, Adult is specified for adults only. For paediatric patients, please ask ScienceLab through the contact page what can be offered instead of assuming that this adult model will fit.
Who supplies the Infusion Arm Splint, Foldable, Adult?
The Infusion Arm Splint, Foldable, Adult is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, nursing homes, medical colleges and distributors in India and international markets.
What should a quotation request for arm splints include?
A quotation request for infusion arm splints should include the number of splints, whether the optional bed strap/fixator is required and the delivery destination. ScienceLab will then respond with price and availability.
Get a quotation for the Infusion Arm Splint, Foldable, Adult by writing to us via the ScienceLab contact page, or add it to the enquiry cart with giving sets and other IV supplies.
Last updated: 24 September 2026
Clamp, Umbilical Cord, Sterile (Product Code: SLE/DDS/09) is a disposable, sterile plastic clamp used to clamp a newborn’s umbilical cord soon after birth in delivery rooms, maternity wards and health centres. Midwives and delivery teams use one clamp per baby; its security lock clicks to show it is correctly closed and protects against accidental re-opening, while grooves along its length stop the cord from slipping. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Disposable umbilical cord clamp |
| Material | Plastic (polymer) |
| Sterility | Sterile |
| Use | Single use |
| Locking | Security lock with a click to indicate correct locking; protects against accidental re-opening after clamping |
| Cord grip | Grooves along the whole length prevent the cord from slipping and keep it in position |
| Handling | Finger grip for safe, easy handling |
| Intended use | Clamping the umbilical cord soon after birth |
| Product code | SLE/DDS/09 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
After a baby is born, the umbilical cord is clamped before it is cut, and the clamp stays on the baby’s side of the cord afterwards. A plastic clamp with a positive lock is quicker to apply than a tied ligature and gives the midwife a clear signal – the click – that it has closed properly.
To apply it, hold the clamp by its finger grip, place the open jaws across the cord and press them together until the lock clicks; if there is no click, reposition and close it again. The clamp is supplied sterile, so check that each pack is intact before opening. Maternity units that restock from one lab consumables supplier in India often order the clamps together with umbilical tape, newborn identification bracelets and dressings.
Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, supplies this sterile umbilical cord clamp from Ambala, Haryana, India. It is sourced for maternity hospitals, birthing centres, primary health programmes and distributors in India and international markets, together with other delivery-room consumables. See the ScienceLab profile page for more about the company.
Delivery-room items used together with the cord clamp:
Find more items in Medical Consumables & Dressings.
Is the Clamp, Umbilical Cord, Sterile supplied sterile?
Yes. The Clamp, Umbilical Cord, Sterile is a disposable clamp supplied sterile and intended for single use. Check that each pack is intact before opening, and do not use a clamp whose packaging is damaged.
How do I know the umbilical cord clamp is locked?
The umbilical cord clamp has a security lock that gives a click when it is correctly closed. The lock is designed to protect against accidental re-opening after clamping, so if no click is heard, reposition the clamp and close it again.
What stops the cord slipping in the clamp?
Grooves run along the full length of the umbilical cord clamp. They prevent the cord from slipping and keep it in the same position, while the finger grip lets the midwife handle the clamp safely and easily.
What is the umbilical cord clamp made of?
The umbilical cord clamp is made of plastic (polymer). The product description does not give the exact polymer or the clamp dimensions, so buyers who need these details should request them through the contact page before ordering.
Can the umbilical cord clamp be reused?
No. The Clamp, Umbilical Cord, Sterile is a single-use, disposable item. Once closed, its lock is built to resist re-opening, and a clamp should never be re-sterilised or used for a second baby.
Who supplies the Clamp, Umbilical Cord, Sterile?
The Clamp, Umbilical Cord, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to maternity hospitals, health centres, relief programmes and distributors in India and international markets.
What information is needed for a cord clamp quotation?
For a cord clamp quotation, state the number of clamps, any other delivery consumables you need such as umbilical tape or newborn ID bracelets, and the delivery destination. ScienceLab will reply with price and availability.
Send your quantity for the Clamp, Umbilical Cord, Sterile through the ScienceLab contact page, or put it in the enquiry cart with other delivery-room items to request one combined quotation.
Last updated: 24 September 2026
Razor, Single Edge, Plastic (Product Code: SLE/DDS/010) is a single-use razor with a plastic handle and head used to shave hair in wards, clinics and treatment rooms. Its single stainless steel blade has one cutting edge protected by a detachable plastic cap, the head measures about 4 cm and the handle about 11 cm, and each razor is meant for one patient only. It is supplied non-sterile by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Single-use razor with single blade |
| Handle and head | Plastic |
| Blade | Stainless steel blade edge; cutting edge on one side |
| Blade protection | Detachable plastic cap |
| Head length | Approx. 4 cm |
| Handle length | Approx. 11 cm |
| Sterility | Non-sterile |
| Use | Single use; never use the same razor for different patients |
| Product code | SLE/DDS/010 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Wards and clinics use disposable razors to remove hair from a patient’s skin – for example where a dressing, adhesive tape or electrode has to sit on a hairy area, or as part of personal care for patients who cannot shave themselves. A one-patient, one-razor routine keeps blades from being shared between people.
Keep the cap on until the moment of use. Afterwards, put the cap back over the blade and destroy the razor in a controlled environment, as the product instructions require – in practice, many facilities drop capped razors into a sharps container and follow their own clinical waste rules. Clinics that restock from a single lab consumables supplier in India can order the razors together with cotton wool, tape and dressings.
Jain Scientific Equipments Private Limited trades as ScienceLab and supplies this single-edge plastic razor from Ambala, Haryana, India. The razor is sourced for hospitals, clinics, nursing homes and distributors in India and international markets as part of the company’s ward consumables range. Company details are on the ScienceLab profile page.
Items used with disposable razors in patient care:
The full range is in Medical Consumables & Dressings.
What are the dimensions of the Razor, Single Edge, Plastic?
The Razor, Single Edge, Plastic has a head of approximately 4 cm and a handle of approximately 11 cm. The head holds a single stainless steel blade with a cutting edge on one side only.
Is the single-edge razor sterile?
No. The Razor, Single Edge, Plastic is supplied non-sterile and is intended for shaving hair. If a sterile razor is required for a particular procedure, say so in your enquiry and ScienceLab will advise on what can be supplied.
Can the razor be used on more than one patient?
No. The single-edge plastic razor is for single use only, and the same razor must never be used on different patients. After use, recap it and destroy it in a controlled environment.
How is the blade protected before use?
The stainless steel cutting edge of the single-edge razor is protected by a detachable plastic cap. Keep the cap on until the moment of use and put it back on straight afterwards, so the blade is covered for disposal.
How should used razors be disposed of?
Used single-edge razors should be recapped and destroyed in a controlled environment, as the product instructions state. Many facilities collect them in a leak-proof sharps container and then follow their own clinical waste procedure.
Who supplies the Razor, Single Edge, Plastic?
The Razor, Single Edge, Plastic is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. It is sourced for hospitals, clinics, nursing homes and distributors in India and international markets.
What should I include when asking for a razor quotation?
When asking for a quotation for single-edge plastic razors, include the quantity, any related items such as sharps containers or cotton wool, and the delivery destination. Use the contact page and ScienceLab will reply with price and availability.
Price the Razor, Single Edge, Plastic for your ward or clinic by sending the quantity through the ScienceLab contact page, or add it to the enquiry cart together with other disposable items.
Last updated: 24 September 2026
Bracelet, Identification, Newborn (Product Code: SLE/DDS/011) is a single-use, non-elastic identification band used to identify newborns and small infants in maternity wards, neonatal units and other health care settings. The white band measures about 1.0 x 15 cm, has a writing space of about 7 cm for an ordinary ballpoint pen, adjusts through perforations and has a tamper-proof closure that is irreversibly damaged on removal. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Non-elastic identification bracelet for newborns and small infants |
| Dimensions | Approx. 1.0 x 15 cm (w x l) |
| Writing space | Approx. 7 cm long; writable with a common ballpoint pen, non-erasable |
| Closure | Definitive; irreversibly damaged upon removal; tamper proof and non-transferable |
| Adjustment | Length adjustable via perforations along the strap |
| Resistance | Resistant to water and common cleaning solvents |
| Skin contact | Atraumatic, non-toxic and hypo-allergenic |
| Material | Supple non-stretch plastic, LDPE-based, vinyl or equivalent |
| Colour | White |
| Use | Single use |
| Product code | SLE/DDS/011 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
In a maternity ward, a band fitted soon after birth keeps each baby identifiable from the delivery room to discharge. Staff write the identification details on the band with an ordinary ballpoint pen; the writing cannot be erased and the band resists water and common cleaning solvents, so the details are not lost during bathing and routine cleaning.
The band can be worn around the wrist or the ankle, and its instructions note that the risk of removal is lower around the ankle. Adjust the length with the perforations, never tighten it excessively, and check that it is intact during consultations; when the baby is discharged, destroy the band to prevent re-use. Hospital stores that buy disposable lab equipment in India together with ward supplies can add the bands to the same order.
ScienceLab is the name under which Jain Scientific Equipments Private Limited trades from Ambala, Haryana, India. The company supplies this newborn identification bracelet as a sourced item for maternity hospitals, neonatal units, health centres and distributors in India and international markets. Learn more on the ScienceLab profile page.
Other items for maternity and newborn care:
Browse Medical Consumables & Dressings for more ward supplies.
What size is the Bracelet, Identification, Newborn?
The Bracelet, Identification, Newborn measures approximately 1.0 x 15 cm (width x length), with a writing space of about 7 cm. Its length is adjusted through perforations along the strap to fit a newborn’s wrist or ankle.
How do you write on the newborn ID bracelet?
Staff write on the newborn ID bracelet with a common ballpoint pen. The writing is non-erasable and the band is resistant to water and common cleaning solvents, so no special marker or printer is needed.
Can the newborn bracelet be removed and re-used?
No. The Bracelet, Identification, Newborn has a definitive closure that is irreversibly damaged when the band is removed, which makes it tamper proof and non-transferable. It is single use and should be destroyed at discharge.
Should the bracelet go on the wrist or the ankle?
The newborn identification bracelet can be worn around the wrist or the ankle. Its instructions note that the risk of removal is reduced when it is fitted around the ankle, and it should never be tightened excessively.
What material is the newborn ID band made of?
The newborn ID band is made of supple, non-stretch plastic, specified as LDPE-based, vinyl or equivalent. It is described as atraumatic, non-toxic and hypo-allergenic, and it comes in white.
Who supplies the Bracelet, Identification, Newborn?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Bracelet, Identification, Newborn to maternity hospitals, neonatal units, health centres and distributors in India and international markets.
What does a quotation for newborn ID bracelets need?
A quotation for newborn ID bracelets needs the number of bands, whether child-size ID bracelets are also required, and the delivery destination. Send the details via the contact page and ScienceLab will reply with price and availability.
Ask for pricing on the Bracelet, Identification, Newborn through the ScienceLab contact page, or add the bands to the enquiry cart with cord clamps and other maternity supplies.
Last updated: 24 September 2026
Tape Umbilical, 3mmx50m, Non-sterile (Product Code: SLE/DDS/012) is a braided, flat cotton ligature tape used to tie the umbilical cord after birth in delivery rooms and maternity units. It is 100% cotton and non-absorbable, 3 mm wide and supplied as a 50 m non-sterile roll, from which facilities cut single-use lengths and sterilise them in a steam steriliser. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Umbilical ligature tape, roll |
| Width | 3 mm |
| Length | 50 m |
| Construction | Braided and flat |
| Material | 100% cotton |
| Absorbability | Non-absorbable |
| Sterility | Non-sterile; the ligature thread can be sterilised in a steam steriliser |
| Use | Single use |
| Product code | SLE/DDS/012 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Umbilical tape is a ligature thread for tying off the umbilical cord. A braided, flat cotton tape was selected for this job because it avoids damaging the cord and keeps knots from coming undone – the product notes specifically advise against monofilament, round or thin ligature thread.
The roll is delivered non-sterile, so the usual routine is to cut lengths in advance, pack them and sterilise them in a steam steriliser before they go to the delivery room. A single 50 m roll yields many ties. Hospitals that source instruments and autoclaves from one laboratory equipment supplier in India can add umbilical tape to the same order.
Jain Scientific Equipments Private Limited, operating under the ScienceLab name in Ambala, Haryana, India, supplies this umbilical tape roll to maternity hospitals, midwifery services, relief programmes and distributors in India and international markets. It belongs to a sourced range of delivery and dressing consumables. The ScienceLab profile page has more about the company.
Items used with umbilical tape at delivery and for preparing it:
See more delivery and dressing items in Medical Consumables & Dressings.
What size is the Tape Umbilical, 3mmx50m, Non-sterile?
The Tape Umbilical, 3mmx50m, Non-sterile is a braided, flat cotton tape 3 mm wide, supplied on a roll 50 m long. Facilities cut it to the length needed for each ligature, and each cut length is for single use.
Is the umbilical tape sterile?
No. The umbilical tape roll is supplied non-sterile. According to its instructions, the ligature thread can be sterilised in a steam steriliser, so cut lengths should be sterilised by the facility before they are used to tie the cord.
Why is braided flat tape used instead of ordinary thread?
Braided flat cotton tape is chosen for tying the umbilical cord to prevent damage to the cord and to stop knots from untying. The product instructions advise against monofilament, round or thin ligature thread for this purpose.
Is the umbilical tape absorbable?
No. The Tape Umbilical, 3mmx50m, Non-sterile is made of 100% cotton and is non-absorbable. It is intended as a ligature thread for tying the umbilical cord after birth.
Who supplies the Tape Umbilical, 3mmx50m, Non-sterile?
The Tape Umbilical, 3mmx50m, Non-sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to maternity hospitals, midwifery services, relief programmes and distributors in India and international markets.
How do I request a quotation for umbilical tape?
To request a quotation for umbilical tape, send the number of 50 m rolls, any related items such as cord clamps, and the delivery destination through the contact page. ScienceLab will reply with price and availability.
Enquire about the Tape Umbilical, 3mmx50m, Non-sterile through the ScienceLab contact page, or add it to the enquiry cart along with other maternity consumables.
Last updated: 24 September 2026
Cotton Wool, 500g, Roll, Non-Sterile (Product Code: SLE/DDS/013) is a highly absorbent roll of surgical-grade cotton wool used for dressings and for skin disinfection before injections in hospitals, clinics and first-aid rooms. The 500 g net roll is 100% cotton that has been purified, bleached and carded; it is not pre-cut, so staff tear off only what they need. It is supplied non-sterile by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Presentation | Roll, not pre-cut |
| Net weight | 500 g |
| Material | 100% cotton, surgical grade; purified, bleached and carded |
| Absorbency | Water absorbent; high-absorbency surgical grade cotton wool |
| Sterility | Non-sterile |
| Use | Single use |
| Product code | SLE/DDS/013 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Cotton wool is the everyday absorbent of a treatment room. Small pads torn from the roll are moistened with the facility’s skin disinfectant to wipe an injection site, used to clean around a wound, or placed as a soft absorbent layer within a dressing. Purifying and bleaching remove the natural waxes of raw cotton, which is what lets surgical cotton wool take up water readily.
Tear pieces from the roll with clean hands and keep the rest closed in its wrapping, away from dust and moisture, because the roll is non-sterile. Where a sterile layer is needed directly on a wound, use a sterile gauze compress instead. A 500 g roll is a practical size for refilling a first aid box in a lab, school or workshop as well as for ward use.
Jain Scientific Equipments Private Limited, which does business as ScienceLab from Ambala, Haryana, India, supplies this cotton wool roll to hospitals, clinics, schools, laboratories and distributors in India and international markets. It is a sourced item within the company’s dressing and first-aid range. The ScienceLab profile page gives more background on the company.
Products used with cotton wool for injections and dressings:
View the whole Medical Consumables & Dressings category.
How much cotton wool is in one roll?
One Cotton Wool, 500g, Roll, Non-Sterile contains a net weight of 500 g of cotton wool. The roll is not pre-cut, so users tear off pieces of the size they need for each dressing or injection.
What grade of cotton is used in the cotton wool roll?
The cotton wool roll is 100% cotton of surgical grade that has been purified, bleached and carded. It is water absorbent and described as a high-absorbency cotton wool for dressing work and skin disinfection before injections.
Is the Cotton Wool, 500g, Roll, Non-Sterile sterile?
No. The Cotton Wool, 500g, Roll, Non-Sterile is supplied non-sterile and is intended for single use. For procedures that need a sterile material in contact with a wound, use sterile gauze compresses or ask ScienceLab about sterile options.
How is cotton wool used before an injection?
Before an injection, a small piece torn from the cotton wool roll is moistened with the facility’s skin disinfectant and wiped over the injection site. The same absorbent cotton wool is also used in dressings, as its instructions for use state.
How should a cotton wool roll be stored?
Store the cotton wool roll in its wrapping in a clean, dry place and tear pieces off with clean hands. Because the 500 g roll is non-sterile, keeping it closed between uses helps protect it from dust and moisture.
Who supplies the Cotton Wool, 500g, Roll, Non-Sterile?
The Cotton Wool, 500g, Roll, Non-Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, clinics, schools, laboratories and distributors in India and international markets.
What does a cotton wool quotation need?
A quotation for cotton wool rolls needs the number of 500 g rolls and the delivery destination, plus any syringes, needles or dressings to be priced together. Send the request through the contact page for price and availability.
Request a price for the Cotton Wool, 500g, Roll, Non-Sterile via the ScienceLab contact page, or add it to the enquiry cart with the rest of your dressing and injection supplies.
Last updated: 24 September 2026
Non-Pneumatic Anti-Shock Garment (Product Code: SLE/DDS/014) is a reusable neoprene garment with Velcro fastenings used as a first-aid measure for women with uncontrollable postpartum haemorrhage (PPH) in maternity units, health centres and referral transport. Listed in a small size, it is intended to help control the bleeding, reverse the shock and stabilise the patient for safe transport to comprehensive obstetric care, and it has no metal parts. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Non-pneumatic anti-shock garment (NASG) |
| Size | Small |
| Intended use | Women with uncontrollable postpartum haemorrhage (PPH): to control the bleeding, reverse the shock and stabilise the patient for safe transport to a comprehensive obstetric care facility |
| Material | Lightweight neoprene garment with Velcro |
| Metal parts | None; described as safe for X-rays and MRIs |
| Wear | Lightweight, flexible and comfortable for the wearer |
| Use | Reusable |
| Product code | SLE/DDS/014 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Postpartum haemorrhage can become critical faster than a woman can reach a facility able to treat its cause. The non-pneumatic anti-shock garment is intended for that gap: it is applied to a woman with uncontrollable PPH to help control the bleeding and reverse the shock, so that she can be stabilised and transported safely to comprehensive obstetric care.
Being non-pneumatic, the garment needs no pump or pressure gauge; the neoprene is closed with Velcro. It has no metal parts, so it is described as safe for X-rays and MRIs, and it is reusable. It should be applied and removed only by health workers trained in its use, following the protocol of their facility or maternal-health programme.
Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, India, supplies this non-pneumatic anti-shock garment to maternity hospitals, health centres, maternal-health programmes and distributors in India and international markets. It is a sourced item listed in the company’s hospital range alongside delivery-room consumables and furniture. More about the company is on the ScienceLab profile page.
Other items for delivery rooms and obstetric emergencies:
Browse all items in Medical Consumables & Dressings.
What is the Non-Pneumatic Anti-Shock Garment used for?
The Non-Pneumatic Anti-Shock Garment is intended for women with uncontrollable postpartum haemorrhage (PPH). According to its description, it is used to control the bleeding, reverse the shock and stabilise the patient for safe transport to a comprehensive obstetric care facility.
What is the anti-shock garment made of?
The non-pneumatic anti-shock garment is made of lightweight neoprene with Velcro fastenings. It is described as lightweight, flexible and comfortable for the wearer, and because it is non-pneumatic it does not need to be inflated.
Can a patient have an X-ray or MRI while wearing the garment?
The Non-Pneumatic Anti-Shock Garment has no metal parts and is described as safe for X-rays and MRIs. Imaging decisions remain with the treating clinical team and should follow the facility’s own protocols.
Is the Non-Pneumatic Anti-Shock Garment reusable?
Yes. The Non-Pneumatic Anti-Shock Garment is listed as reusable. The product description does not specify a cleaning method or a number of uses, so please ask ScienceLab through the contact page for care and reprocessing information before ordering.
What size is the anti-shock garment?
This anti-shock garment is listed as a small-sized NASG. The description gives no body measurements for the size, so confirm your fit requirements and ask about any other sizes through ScienceLab before placing an order.
Who should apply the anti-shock garment?
The Non-Pneumatic Anti-Shock Garment should be applied and removed only by health workers trained in its use, following the clinical protocol of their facility or maternal-health programme and the judgement of the treating team.
Who supplies the Non-Pneumatic Anti-Shock Garment?
The Non-Pneumatic Anti-Shock Garment is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to maternity hospitals, health centres, maternal-health programmes and distributors in India and international markets.
To obtain a quotation for the Non-Pneumatic Anti-Shock Garment, send the number of garments and your delivery destination via the ScienceLab contact page, or add it to the enquiry cart with other delivery-room items.
Last updated: 24 September 2026
Syringe, Insulin, 1ml, U-100 (Product Code: SLE/HLI/01) is a 1 ml insulin syringe with a U-100 unit scale, used to measure and inject insulin doses in hospitals, clinics and community health settings. Nurses and diabetes care teams use it because doses are read in units, not millilitres; it is a three-piece syringe – barrel with nozzle, stopper and piston/plunger – with a fine stainless steel needle under an orange needle cap. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Insulin syringe, three-piece |
| Nominal capacity | 1 ml |
| Unit scale | U-100 |
| Components | Barrel with nozzle, stopper and piston/plunger |
| Needle | Stainless steel fine needle |
| Needle cap | Orange |
| Product code | SLE/HLI/01 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Insulin is prescribed in units rather than millilitres. A U-100 syringe is scaled for U-100 insulin, which contains 100 units in every millilitre, so the full 1 ml barrel corresponds to 100 units and each dose is drawn up by reading the unit marks directly – no conversion from millilitres is needed at the bedside.
Always match the syringe to the insulin: a U-100 syringe must only be used with U-100 insulin. The orange cap helps staff tell insulin syringes apart from general-purpose syringes on a tray, and used syringes with their needles should go straight into a sharps container. Nursing and pharmacy colleges also use them to teach unit-based dose measurement, so they are often ordered with pharmacy college lab equipment.
The insulin syringe is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, India. The company sources it for hospitals, clinics, pharmacies, colleges and distributors in India and international markets as part of its syringe and needle range. See the ScienceLab profile page for company information.
Other injection supplies from the same range:
The full syringe and dressing range is in Medical Consumables & Dressings.
What does U-100 mean on the insulin syringe?
U-100 means the Syringe, Insulin, 1ml, U-100 is scaled for insulin containing 100 units per millilitre. Its 1 ml barrel therefore represents 100 units, and doses are read directly from the unit markings rather than in millilitres.
What parts does the insulin syringe have?
The Syringe, Insulin, 1ml, U-100 is a three-piece syringe made up of a barrel with nozzle, a stopper and a piston/plunger. It comes with a stainless steel fine needle protected by an orange needle cap.
Can a U-100 insulin syringe be used with other insulin strengths?
No. A U-100 insulin syringe should only be used with U-100 insulin, because its unit scale assumes 100 units per millilitre. Using it with insulin of a different concentration would give an incorrect dose.
What needle gauge does the insulin syringe have?
The listing for the Syringe, Insulin, 1ml, U-100 describes a stainless steel fine needle but does not state its gauge or length. Ask ScienceLab through the contact page to confirm the needle size available before ordering.
Is the insulin syringe sterile?
The product description for the Syringe, Insulin, 1ml, U-100 does not state sterility or packaging details. Please confirm sterility, packaging and pack quantity with ScienceLab before ordering syringes for clinical use.
Who supplies the Syringe, Insulin, 1ml, U-100?
The Syringe, Insulin, 1ml, U-100 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, clinics, pharmacies, colleges and distributors in India and international markets.
What does a quotation for insulin syringes need?
A quotation for U-100 insulin syringes needs the quantity, the needle size and packaging you require, and the delivery destination. Send these details and ScienceLab will respond with price and availability.
Ask for a quotation on the Syringe, Insulin, 1ml, U-100 through the ScienceLab contact page, or add it to the enquiry cart together with needles, lancets and other injection supplies.
Last updated: 24 September 2026
Syringe, Disposable, 20ml, Sterile (Product Code: SLE/HLI/02) is a sterile, disposable 20 ml syringe with a Luer nozzle, used to inject fluids into, or withdraw fluids from, the body in hospitals, clinics and treatment rooms. Its 20 ml capacity suits larger-volume tasks such as drawing up and diluting medicines or aspirating fluid, and it comes in two-piece or three-piece construction. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Disposable syringe, sterile |
| Capacity | 20 ml |
| Nozzle | Luer |
| Construction | Two-piece (barrel with Luer nozzle, piston/plunger) or three-piece (barrel with Luer nozzle, stopper, piston/plunger) |
| Intended use | To inject fluids into, or withdraw fluids from, the body |
| Needle | Not specified in the listing; sterile needles are listed separately |
| Product code | SLE/HLI/02 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A 20 ml syringe handles volumes that are too large for everyday injection syringes: drawing up and mixing medicines for dilution, withdrawing fluid, or flushing and irrigating. The Luer nozzle takes standard Luer-fitting needles and connects to many tubing adaptors, so one syringe size covers several ward tasks.
The three-piece version has a separate stopper on the plunger tip, which many users find gives a smoother, more controlled push; in the two-piece version the plunger seals directly against the barrel. Laboratories also buy 20 ml syringes as disposable lab equipment in India for measuring and transferring liquid samples.
Jain Scientific Equipments Private Limited, the company behind the ScienceLab brand in Ambala, Haryana, India, supplies this 20 ml syringe to hospitals, clinics, laboratories and distributors in India and international markets. The syringe is a sourced item from the company’s range of injection consumables. Details about the company are on the ScienceLab profile page.
Needles and alternative syringe sizes for the same tasks:
All syringe sizes are listed in Medical Consumables & Dressings.
What is the capacity of the Syringe, Disposable, 20ml, Sterile?
The Syringe, Disposable, 20ml, Sterile has a capacity of 20 ml. It is used to inject fluids into, or withdraw fluids from, the body when a larger volume is needed than a 2, 5 or 10 ml syringe can hold.
Is the 20 ml syringe two-piece or three-piece?
The 20 ml syringe is listed in two constructions: two-piece, with a barrel with Luer nozzle and a piston/plunger, or three-piece, which adds a stopper. State which construction you prefer when you request a quotation.
Does the 20 ml syringe come with a needle?
The listing for the Syringe, Disposable, 20ml, Sterile describes the syringe only and does not mention a needle. Its Luer nozzle accepts Luer-fitting needles, and sterile disposable needles in several gauges are available separately from ScienceLab.
What graduation does the 20 ml syringe have?
The product description for the Syringe, Disposable, 20ml, Sterile does not state its scale intervals. If your procedure needs a particular graduation, ask ScienceLab through the contact page to confirm the markings before you order.
Is the Syringe, Disposable, 20ml, Sterile reusable?
No. The Syringe, Disposable, 20ml, Sterile is a sterile, disposable syringe for single use. After use, discard it together with any attached needle in a sharps container, following the facility’s waste procedure.
Who supplies the Syringe, Disposable, 20ml, Sterile?
The Syringe, Disposable, 20ml, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, clinics, laboratories and distributors in India and international markets.
For a quotation on the Syringe, Disposable, 20ml, Sterile, send the quantity and preferred construction through the ScienceLab contact page, or add it to the enquiry cart with the needles you need.
Last updated: 24 September 2026
Syringe, Disposable, 10ml, Sterile (Product Code: SLE/HLI/03) is a sterile, disposable 10 ml Luer-nozzle syringe used to inject fluids into, or withdraw fluids from, the body in wards, clinics and treatment rooms. Its easy-to-read barrel scale has intervals of 0.2, 0.5 or 1.0 ml with graduation lines at 1.0 or 5.0 ml, and it is available as a two-piece or three-piece syringe. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Disposable syringe, sterile |
| Capacity | 10 ml |
| Nozzle | Luer |
| Construction | Two-piece (barrel with Luer nozzle, piston/plunger) or three-piece (barrel with Luer nozzle, stopper, piston/plunger) |
| Scale | Graduated scale on the barrel, easy to read |
| Scale intervals | 0.2, 0.5 or 1.0 ml |
| Graduation lines | 1.0 or 5.0 ml |
| Intended use | To inject fluids into, or withdraw fluids from, the body |
| Product code | SLE/HLI/03 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
The 10 ml syringe is the general-purpose size on most ward trays: it is used to draw up and give medicines, to add diluent to powdered preparations and to take fluid samples. Because the scale is available with intervals as fine as 0.2 ml, the same size covers both whole-millilitre volumes and more carefully measured part doses.
For an accurate reading, draw up slightly more than needed, expel air bubbles with the nozzle pointing upward, then push the plunger until the front edge of the stopper meets the required line. Colleges buying pharmacy lab equipment in India often add 10 ml syringes for practical classes in measuring and transferring liquid volumes.
ScienceLab is the trading name used by Jain Scientific Equipments Private Limited of Ambala, Haryana, India, which supplies this 10 ml syringe as part of a sourced range of syringes, needles and infusion sets. Hospitals, clinics, colleges and distributors in India and international markets can combine several syringe sizes in a single order. Read more on the ScienceLab profile page.
Needles, alternative sizes and injection-site supplies:
Compare every size in Medical Consumables & Dressings.
What are the scale intervals on the 10 ml syringe?
The Syringe, Disposable, 10ml, Sterile has a graduated, easy-to-read barrel scale with intervals of 0.2, 0.5 or 1.0 ml and graduation lines at 1.0 or 5.0 ml. Tell ScienceLab which interval you need when you order.
Is there a 10 ml syringe with a needle attached?
Yes, as a separate listing. This Syringe, Disposable, 10ml, Sterile listing does not mention a needle, while the ScienceLab catalogue also offers a 10 ml syringe supplied with a needle as a separate item, so choose whichever suits your workflow.
What is the difference between the two-piece and three-piece versions?
The two-piece 10 ml syringe has a barrel with Luer nozzle and a piston/plunger; the three-piece version adds a separate stopper on the plunger. Both have the same 10 ml capacity and Luer nozzle, so state your preference in the enquiry.
What is the 10 ml disposable syringe used for?
The Syringe, Disposable, 10ml, Sterile is intended to inject fluids into, or withdraw fluids from, the body. Its 10 ml size is a common choice for drawing up medicines and taking fluid samples in wards, clinics and treatment rooms.
Can the 10 ml syringe be reused?
No. The Syringe, Disposable, 10ml, Sterile is supplied sterile for one use only. Once used, it should go into a sharps container with its needle rather than be cleaned, re-sterilised or used for another patient.
Who supplies the Syringe, Disposable, 10ml, Sterile?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Syringe, Disposable, 10ml, Sterile to hospitals, clinics, colleges and distributors in India and international markets.
Request pricing for the Syringe, Disposable, 10ml, Sterile by sending your quantity, construction and scale interval through the ScienceLab contact page, or add it to the enquiry cart with other injection supplies.
Last updated: 24 September 2026
Syringe, Disposable, 2ml, Sterile (Product Code: SLE/HLI/04) is a sterile, disposable 2 ml syringe with a Luer nozzle used for small-volume injections and for withdrawing small amounts of fluid in clinics, wards and treatment rooms. Its barrel scale reads in fine 0.1 or 0.2 ml intervals with a graduation line at each 1.0 ml, which makes part-millilitre doses easy to measure, and it is available as a two-piece or three-piece syringe. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Disposable syringe, sterile |
| Capacity | 2 ml |
| Nozzle | Luer |
| Construction | Two-piece (barrel with Luer nozzle, piston/plunger) or three-piece (barrel with Luer nozzle, stopper, piston/plunger) |
| Scale | Graduated scale on the barrel, easy to read |
| Scale intervals | 0.1 or 0.2 ml |
| Graduation lines | At every 1.0 ml volume increment |
| Intended use | To inject fluids into, or withdraw fluids from, the body |
| Product code | SLE/HLI/04 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Small syringes exist because accuracy depends on scale: a dose of a fraction of a millilitre is far easier to measure on a 2 ml barrel marked every 0.1 ml than on a larger syringe with coarser markings. The 2 ml size is therefore used for small-volume injections and for drawing off small quantities of fluid.
As a rule, pick the smallest syringe that holds the whole dose, draw up, tap out air bubbles and set the plunger stopper exactly on the required line before giving the injection. Teaching and research labs buying disposable lab equipment in India also use 2 ml syringes to dispense small liquid volumes during practical work.
From its base in Ambala, Haryana, India, Jain Scientific Equipments Private Limited – trading as ScienceLab – supplies this 2 ml syringe to hospitals, clinics, colleges, laboratories and distributors in India and international markets. It is sourced alongside the other syringe sizes and needles in the catalogue, so mixed orders are straightforward to quote. The ScienceLab profile page describes the company.
Other small-volume syringes and injection supplies:
See all syringe sizes in Medical Consumables & Dressings.
What is the scale on the 2 ml syringe?
The Syringe, Disposable, 2ml, Sterile has an easy-to-read graduated barrel with scale intervals of 0.1 or 0.2 ml and a graduation line at every 1.0 ml. Specify the interval you need in your quotation request.
Why choose a 2 ml syringe for small doses?
A 2 ml syringe is chosen for small doses because its fine 0.1 or 0.2 ml intervals let staff measure fractions of a millilitre more precisely than on a larger syringe with coarser markings. Use the smallest syringe that holds the full dose.
Is the 2 ml syringe two-piece or three-piece?
The 2 ml syringe is listed as either two-piece, with a barrel with Luer nozzle and a piston/plunger, or three-piece, which adds a stopper. Both have the same 2 ml capacity, so state your preference when ordering.
Does the Syringe, Disposable, 2ml, Sterile include a needle?
The listing for the Syringe, Disposable, 2ml, Sterile does not mention a needle. Its Luer nozzle accepts Luer-fitting needles, and ScienceLab lists sterile disposable needles separately, so add the gauge you need to your enquiry.
Can the 2 ml syringe be used more than once?
No. The 2 ml syringe is a sterile, disposable item intended for a single use. Discard each used syringe and needle straight into a sharps container and never share a syringe between patients.
Who supplies the Syringe, Disposable, 2ml, Sterile?
The Syringe, Disposable, 2ml, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India, to hospitals, clinics, colleges, laboratories and distributors in India and international markets.
Send the quantity, construction and scale interval for the Syringe, Disposable, 2ml, Sterile through the ScienceLab contact page, or collect it in the enquiry cart with needles and other syringe sizes for one quotation.
Last updated: 24 September 2026
Syringe, Disposable, 1ml, Sterile (Product Code: SLE/HLI/05) is a single-use, three-piece syringe used to inject small volumes of fluid into, or withdraw fluid from, the body in clinics, hospital wards and health-training laboratories. Nursing staff and training instructors choose the 1 ml size when a volume has to be read against a fine 0.05 ml scale interval. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, within its range of disposable lab equipment in India.
| Parameter | Detail |
|---|---|
| Construction | Three pieces: barrel with Luer nozzle, stopper and piston/plunger |
| Capacity | 1 ml |
| Scale | Graduated scale on the barrel, easy to read |
| Scale interval | 0.05 ml |
| Graduation lines | 0.1 ml volume increments |
| Intended use | Injecting fluids into, or withdrawing fluids from, the body |
| Condition | Sterile, disposable (as named); ask us for the sterilisation method and pack size |
| Product code | SLE/HLI/05 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
The 1 ml syringe is the small-volume member of a syringe range. Its slim barrel lets a trained user draw up and deliver fractions of a millilitre, where a larger barrel would make the reading coarse. Hospitals and clinics keep it for small prescribed doses, while nursing and pharmacy training labs use it to teach students how to read fine graduations and handle a syringe correctly.
In practice, a separate sterile needle is fitted to the Luer nozzle, air bubbles are expelled before the dose is set, and the volume is read where the stopper meets the scale. Once used, the syringe and needle go straight into a sharps container. Stores teams sourcing from a lab consumables supplier in India often stock the 1 ml size next to 2 ml and 5 ml syringes so staff can match barrel size to volume.
Jain Scientific Equipments Private Limited trades under the name ScienceLab and works from Ambala, Haryana. It supplies this 1 ml syringe together with needles, dressings and other ward consumables, which lets clinics, training institutes and distributors combine several items into one order. Read more about the company on the ScienceLab profile page.
Items that are usually ordered alongside a 1 ml syringe:
See every item in the Medical Consumables & Dressings category.
What parts make up the Syringe, Disposable, 1ml, Sterile?
The Syringe, Disposable, 1ml, Sterile has three pieces: a barrel with a Luer nozzle, a stopper and a piston or plunger. A needle is not listed as part of this item, so order a matching disposable needle separately if you need one.
How finely can the 1 ml disposable syringe be read?
The 1 ml disposable syringe carries an easy-to-read graduated scale on the barrel with a 0.05 ml scale interval and graduation lines at 0.1 ml volume increments, which suits small volumes that must be drawn up carefully.
Is the Syringe, Disposable, 1ml, Sterile an insulin syringe?
No. The Syringe, Disposable, 1ml, Sterile is graduated in millilitres, not insulin units. ScienceLab lists a separate 1 ml insulin syringe graduated for insulin; check with your prescriber or procurement team which type your facility needs.
Can the 1 ml disposable syringe be reused?
No. The 1 ml disposable syringe is a single-use item. After use it should go, with any attached needle, into a puncture-resistant sharps container and be disposed of under your facility's clinical waste procedure.
Who supplies the Syringe, Disposable, 1ml, Sterile?
The Syringe, Disposable, 1ml, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, to hospitals, clinics, training institutes and distributors in India and international markets. Ask us for the sterilisation method, pack size and batch expiry date with your quotation.
What should a quotation request for 1 ml syringes include?
A quotation request for the Syringe, Disposable, 1ml, Sterile should state the quantity, whether needles are also required, the delivery location and any documents your purchase process needs. Send these through the ScienceLab contact page.
To buy the Syringe, Disposable, 1ml, Sterile, send your quantity and delivery details through the contact page, or add it to the enquiry cart with other consumables for one combined quotation.
Last updated: 24 September 2026
Syringe, Disposable, 10ml, W/ndl, 21G (Product Code: SLE/HLI/06) is a sterile 10 ml Luer syringe packed together with a 21G needle, used to draw up, inject or withdraw larger fluid volumes in hospitals, clinics and medical-training rooms. Because the syringe and its 21G (0.80 x 38-40 mm) needle arrive bi-packed, staff open one pack instead of pairing two items. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Capacity | 10 ml |
| Syringe construction | Two pieces (barrel with Luer nozzle and piston) or three pieces (barrel with Luer nozzle, piston and stopper) |
| Nozzle | Luer nozzle, concentric or eccentric |
| Graduation | Graduated scale on the barrel; scale interval 0.5 ml, numbered graduation lines every 1.0 ml |
| Barrel | Transparent enough to read the contained volume easily and detect air bubbles |
| Syringe material | Polyethylene or polypropylene (PP) |
| Needle | 21G (0.80 x 38-40 mm), bi-packed with the syringe |
| Needle parts | Stainless steel needle; plastic base with conical Luer-type fitting; plastic protecting cap |
| Condition | Sterile, disposable |
| Product code | SLE/HLI/06 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A 10 ml barrel handles the mid-to-large volumes that smaller syringes cannot hold in one draw, such as drawing up a diluent, giving a prescribed injection volume or withdrawing a fluid sample under clinical direction. Supplying the 21G needle in the same pack means the set is ready as soon as it is opened, which is useful on busy wards, in outreach kits and in nursing skills labs where students practise the full preparation sequence.
The clear barrel lets the user check that no air bubbles remain before the plunger is pushed, and the 0.5 ml scale interval with numbered 1 ml lines keeps readings quick. Once finished, the needle should not be recapped by hand; the whole unit goes into a sharps container. Buyers setting up disposable lab equipment in India for training rooms often order this bi-packed version alongside plain 10 ml syringes.
This syringe-and-needle pack is supplied by Jain Scientific Equipments Private Limited, the Ambala-based company that trades as ScienceLab. Hospitals, NGOs, training colleges and stockists can source it with other syringe sizes, needles and dressings in a single enquiry. Company details are on the about ScienceLab page.
Consider these items for the same injection or sampling routine:
Browse the complete Medical Consumables & Dressings range.
Does the Syringe, Disposable, 10ml, W/ndl, 21G include a needle?
Yes. The Syringe, Disposable, 10ml, W/ndl, 21G is bi-packed with a 21G needle measuring 0.80 x 38-40 mm. The needle is stainless steel with a plastic conical Luer-type base and a plastic protecting cap.
What is the 10 ml syringe with 21G needle made of?
The barrel of the 10 ml syringe with 21G needle is polyethylene or polypropylene, transparent enough to read the volume and spot air bubbles. The needle itself is stainless steel, while its base and cap are plastic.
How is the scale on the 10 ml disposable syringe marked?
The 10 ml disposable syringe has a graduated scale on the barrel with a 0.5 ml scale interval and numbered graduation lines every 1.0 ml, so volumes can be set and checked at a glance.
Can I order the 10 ml syringe without the needle?
Yes. If you only need the barrel, ScienceLab also lists the Syringe, Disposable, 10ml, Sterile without a bi-packed needle. Mention both codes in your enquiry if you want to compare them in one quotation.
Who supplies the Syringe, Disposable, 10ml, W/ndl, 21G?
The Syringe, Disposable, 10ml, W/ndl, 21G is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospitals, clinics, training institutes and distributors in India and international markets. Ask us for pack size and batch expiry details.
Is the 10 ml syringe with needle reusable?
No. The 10 ml syringe with 21G needle is a sterile, disposable, single-use item. After one use, place the syringe and needle together in a sharps container and follow your facility's clinical waste rules.
Send the quantity, construction and nozzle preference for the Syringe, Disposable, 10ml, W/ndl, 21G through our contact form, or place it in the enquiry cart with other hospital consumables.
Last updated: 24 September 2026
Needle, Disposable, 23G, Sterile (Product Code: SLE/HLI/07) is a single-use hypodermic needle that fits onto a Luer syringe and is used to inject or withdraw fluids in hospitals, clinics and nursing-skills laboratories. Its 23G x 1 inch (0.6 x 25 mm) size makes it the finest gauge among the disposable needles in this ScienceLab range. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for buyers sourcing ward and training consumables.
| Parameter | Detail |
|---|---|
| Size | 23G x 1 inch (0.6 x 25 mm) |
| Needle material | Stainless steel |
| Base and protective cap | Medical grade plastic |
| Size marking | External diameter expressed in gauge and millimetres; length in inches and millimetres |
| Condition | Sterile (as named), disposable |
| Product code | SLE/HLI/07 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Needle gauge numbers run in reverse: the higher the number, the thinner the needle. At 23G the bore is narrow and the shaft is only 25 mm long, so clinicians tend to pair it with small syringes and thin, free-flowing liquids when a finer puncture is wanted. The final choice of gauge and length for any procedure rests with the prescribing or treating professional.
In nursing colleges and simulation labs, a box of 23G needles is a common teaching item for demonstrating how to attach a needle to the Luer fitting, remove the protective cap without touching the shaft, and discard the needle safely. Because the size is printed in both gauge and millimetres, trainees also learn to read needle labels. Institutions buying from a lab consumables supplier in India usually stock it next to the wider-bore needle sizes in the same range.
ScienceLab is the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana. The company supplies these 23G needles as part of a wider hospital-consumables list, so a clinic or training institute can source needles, syringes and waste containers from one point of contact. See the company profile for background.
Syringes and accessories used with a 23G needle:
More items are listed under Medical Consumables & Dressings.
What size is the Needle, Disposable, 23G, Sterile?
The Needle, Disposable, 23G, Sterile measures 23G x 1 inch, which equals 0.6 mm external diameter and 25 mm length. The label expresses diameter in gauge and millimetres and length in inches and millimetres.
What is the 23G disposable needle made of?
The 23G disposable needle has a stainless steel shaft, while the base that connects to the syringe and the protective cap are made of medical grade plastic.
Does the 23G needle come with a syringe?
No. The Needle, Disposable, 23G, Sterile is sold as a needle only. Pair it with a Luer syringe such as the 1 ml or 5 ml disposable syringes from the same ScienceLab range, and list both in your enquiry.
How should used 23G needles be disposed of?
Used 23G disposable needles are single-use sharps. Do not recap them by hand; drop them into a puncture-resistant sharps container immediately after use and follow your facility's clinical waste procedure for final disposal.
Who supplies the Needle, Disposable, 23G, Sterile?
The Needle, Disposable, 23G, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, clinics, colleges and distributors in India and international markets. Ask us for box quantity, sterilisation method and batch expiry details.
For a price on the Needle, Disposable, 23G, Sterile, share your quantity and delivery location via the ScienceLab contact page, or collect it with other items in the enquiry cart.
Last updated: 24 September 2026
Needle, Disposable, 19G, Sterile (Product Code: SLE/HLI/08) is a single-use stainless steel needle with a Luer-type base and protective cap, used to inject fluids into, or withdraw fluids from, parts of the body below the skin surface in hospitals, clinics and clinical-skills labs. At 19G it is the widest-bore needle among the gauges ScienceLab lists in this range. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Gauge | 19G |
| Components | Needle with base (Luer-type fitting) and protective cap |
| Needle material | Stainless steel |
| Base and protective cap | Medical grade plastic |
| Size marking | External diameter expressed in gauge and millimetres |
| Length | Not listed — state the length you need when enquiring |
| Intended use | Injecting fluids into, or withdrawing fluids from, parts of the body below the surface of the skin |
| Condition | Sterile (as named), disposable |
| Product code | SLE/HLI/08 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A lower gauge number means a wider needle, and 19G sits at the broad end of everyday hypodermic sizes. A wide bore lets liquid move with less resistance, so needles of this size are commonly chosen for drawing medicines or diluents up from vials and ampoules, or for thicker liquids, before a finer needle is fitted for the injection itself. Which gauge is used on a patient is always a clinical decision.
The Luer-type base pushes onto any standard Luer syringe nozzle, and the protective cap keeps the point covered until the moment of use. For pharmacy and nursing practicals, a supply of 19G needles lets students compare bore sizes side by side with the finer needles in the range. Hospitals purchasing disposable lab equipment in India often keep all three gauges on the same shelf.
Jain Scientific Equipments Private Limited, known to buyers as ScienceLab, supplies the 19G disposable needle from Ambala, Haryana. Clinics, medical colleges and distributors can add it to orders for syringes, infusion sets and dressings from the same catalogue. More about the company is on the ScienceLab profile.
Products that go with a wide-bore needle:
The full range is in the Medical Consumables & Dressings category.
What length is the Needle, Disposable, 19G, Sterile?
The listing for the Needle, Disposable, 19G, Sterile gives the gauge but not the length. Tell us the length you need through the contact page and we will confirm what can be supplied before quoting.
What is the 19G disposable needle made from?
The 19G disposable needle has a stainless steel shaft. Its Luer-type base and the protective cap that covers the point are made of medical grade plastic.
Will the 19G needle fit my syringes?
The Needle, Disposable, 19G, Sterile has a Luer-type base, so it is designed to fit syringes with a standard Luer nozzle, such as the disposable syringes in the ScienceLab range. Check with us if your syringes use a non-Luer connector.
How does the 19G needle compare with finer gauges?
A 19G needle has a wider external diameter than higher-gauge needles, because gauge numbers rise as needles get thinner. The Needle, Disposable, 19G, Sterile is therefore the wide-bore choice in the ScienceLab needle range, with finer gauges listed separately.
Who supplies the Needle, Disposable, 19G, Sterile?
The Needle, Disposable, 19G, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, colleges and distributors in India and international markets. Ask us for box size, sterilisation details and batch expiry date.
To receive a quotation for the Needle, Disposable, 19G, Sterile, send the required length and quantity through the contact page or add it to the enquiry cart.
Last updated: 24 September 2026
Lancet, Blood, Sterile, Disposable (Product Code: SLE/HLI/09) is a ready-to-use manual blood lancet used to make a small skin puncture for capillary blood sampling in clinical laboratories, clinics and physiology practical classes. Each chrome-polished stainless steel lancet is individually packed, single use, and gives a typical incision depth of approximately 2 mm. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, among other lab consumables for sampling work.
| Parameter | Detail |
|---|---|
| Type | Sturdy, ready-to-use manual blood lancet |
| Point | Sharp point, tapered on all sides, for a quick, clean puncture |
| Grip | Ribbed surface for a firm grip |
| Typical incision depth | Approximately 2 mm |
| Length | Approximately 40 mm |
| Width | Approximately 6 mm |
| Thickness | Approximately 0.05 mm (as listed) |
| Material | Chrome-polished stainless steel |
| Packing | Sterile, individually packed |
| Initial sterilisation method | Ethylene oxide gas or gamma radiation |
| Use | Single use |
| Product code | SLE/HLI/09 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A blood lancet produces a drop of capillary blood, usually from a fingertip, for tests that need only a small sample: blood-group typing, haemoglobin estimation, glucose checks or preparing a blood smear on a slide. Medical laboratory technology courses and college physiology practicals rely on sterile lancets so that each student or subject uses a fresh point.
The user cleans the site, holds the lancet by its ribbed section, makes a single quick puncture and wipes away the first drop if the test procedure requires it. The flat, manual design needs no firing device, which keeps it simple for field camps and teaching labs. After one use, the lancet is dropped into a sharps container and never re-sheathed. Lab managers buying from a lab consumables supplier in India usually order lancets together with capillary tubes and cotton wool.
ScienceLab is the name under which Jain Scientific Equipments Private Limited, Ambala, Haryana, trades. It supplies this blood lancet to laboratories, hospitals, colleges and distributors that want one source for sampling consumables and related hospital supplies. For company information, visit the ScienceLab profile page.
Items used in the same finger-prick sampling routine:
Explore the whole Medical Consumables & Dressings category.
How deep does the Lancet, Blood, Sterile, Disposable puncture?
The Lancet, Blood, Sterile, Disposable has a typical incision depth of approximately 2 mm. Its sharp point is tapered on all sides, and the listing describes it as giving a quick, clean puncture for capillary blood sampling.
What are the dimensions of the disposable blood lancet?
The disposable blood lancet is approximately 40 mm long and 6 mm wide, with a listed thickness of approximately 0.05 mm. It is made of chrome-polished stainless steel and has a ribbed surface for a firm grip.
How is the blood lancet packed and sterilised?
Each Lancet, Blood, Sterile, Disposable is sterile and individually packed. The listed initial sterilisation method is ethylene oxide gas or gamma radiation; ask us which method applies to the batch you are quoted, together with its expiry date.
Does the blood lancet need a lancing device?
No. The Lancet, Blood, Sterile, Disposable is a manual lancet that is held between the fingers and used directly, so no spring-loaded pen or firing device is required.
Who supplies the Lancet, Blood, Sterile, Disposable?
The Lancet, Blood, Sterile, Disposable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to clinical laboratories, colleges, hospitals and distributors in India and international markets. Send your quantity through the contact page for a quotation.
Tell us how many Lancet, Blood, Sterile, Disposable units you need through the contact page, or add them to the enquiry cart with capillary tubes and other sampling supplies.
Last updated: 24 September 2026
Infusion Giving Set, Sterile (Product Code: SLE/HLI/010) is a sterile, single-use IV administration set used to deliver infusion fluids from a bottle or bag into a patient's vein by gravity in hospital wards, clinics and nursing-training rooms. It combines a capped perforator, a filtered air inlet, a transparent drip chamber calibrated at 20 drops/ml, at least 150 cm of clear tubing and a roller clamp. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Infusion giving set for parenteral administration of infusions (IV fluids) by gravity |
| Perforator | Sharp piercing device with protective cap |
| Air inlet | With integrated bacteriological filter |
| Drop counting chamber | Transparent drip chamber, calibrated at 20 drops/ml, with 15-20 µm fluid filter |
| Tubing | Transparent, minimum length 150 cm |
| Injection site | Latex or latex-free injection site, or Y-injection port |
| Distal connector | Preferably Luer lock |
| Flow regulator | Smooth roller clamp for easy, safe control and adjustment of fluid rates |
| Condition | Sterile, single use |
| Product code | SLE/HLI/010 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
This is the standard gravity IV line: the perforator is pushed into the fluid bottle or bag, the drip chamber is squeezed to half-fill it, and the tubing is primed until no air remains before the distal connector is attached to the patient's cannula. The roller clamp then sets the drip rate, which staff count in the transparent chamber. Because the chamber delivers 20 drops per ml, a nurse can convert a prescribed volume per hour into drops per minute.
The set is also a core item in nursing skills labs, where students practise spiking bags, priming lines and calculating drip rates on training arms before they work on wards. The injection site on the tubing allows compatible medicines to be added into the line under clinical direction. Hospitals and training colleges buying disposable lab equipment in India usually order giving sets together with IV stands and arm splints.
The Infusion Giving Set, Sterile is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. Hospitals, health programmes and distributors can source it together with other infusion accessories and ward consumables in one enquiry. See the ScienceLab company profile.
Products that complete an IV infusion set-up:
View all products in Medical Consumables & Dressings.
What is the drop factor of the Infusion Giving Set, Sterile?
The Infusion Giving Set, Sterile has a transparent drip chamber calibrated at 20 drops/ml, fitted with a 15-20 µm fluid filter. Staff use this drop factor to convert a prescribed infusion volume into a drip rate.
How long is the tubing on the infusion giving set?
The infusion giving set has transparent tubing with a minimum length of 150 cm. The tubing carries an injection site and ends in a distal connector, preferably of the Luer lock type.
Is the Infusion Giving Set, Sterile available latex-free?
The listing for the Infusion Giving Set, Sterile allows a latex or latex-free injection site, or a Y-injection port. State which version you need in your enquiry, especially if the sets are for patients or staff with latex sensitivity.
How is the flow controlled on this IV giving set?
Flow on the Infusion Giving Set, Sterile is controlled by a smooth roller clamp that lets the user adjust and set the fluid rate. Fluid runs by gravity, so the height of the bag or bottle also matters.
Can the infusion giving set be reused?
No. The Infusion Giving Set, Sterile is a sterile, single-use device. Use a new set for each patient and each infusion as your facility's protocol directs, and discard the used set as clinical waste.
Who supplies the Infusion Giving Set, Sterile?
The Infusion Giving Set, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, clinics, training institutes and distributors in India and international markets. Ask us for pack quantity and batch expiry date.
Share the quantity, injection-site type and connector preference for the Infusion Giving Set, Sterile via our contact page, or add it to the enquiry cart.
Last updated: 24 September 2026
Infusion Giving Set, W/Burette, Sterile (Product Code: SLE/HLI/011) is a sterile, single-use IV giving set with a graduated burette chamber, used to measure out and slowly administer a set volume of infusion fluid or injectable medicine in hospitals and clinics. Its approximately 100-150 ml burette is graduated every millilitre and feeds a drop chamber calibrated at 60 drops/ml, with an automatic shut-off valve. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Graduated chamber (burette) | Polystyrene (PS), transparent; capacity approximately 100-150 ml; graduations every ml; connected to the perforator by a tube of approximately 15 cm |
| Security gauge | Automatic shut-off valve that stops the infusion once the pre-set volume has flowed, to prevent air entering the drop-counting chamber and/or the tube |
| Drop-counting chamber | Located under the graduated chamber; calibrated 60 drops/ml; fitted with a 15 µ polyamide filter |
| Tube | PVC (polyvinyl chloride), transparent for detecting air bubbles, resistant to kinking |
| Tube length | Approximately 150 cm (overall set length approximately 170 cm) |
| Tube internal / external diameter | Approximately 3 mm / 4 mm |
| Perforator | Plastic (polyacetate); hollow tapering tube on a base at the proximal end for a good seal with the infusion bottle or bag; fitted with a protecting cap |
| Air inlet | ABS (acrylonitrile butadiene styrene), incorporated into the perforator, fitted with an air (bacteriological) filter |
| Flow regulator | ABS; keeps the flow regular during IV administration |
| Injection portal | ABS with synthetic rubber; for introducing precise volumes of injectable medicine into the infusion flow |
| Terminal connection (stopper) | ABS |
| Connector | Luer lock |
| Condition | Sterile, single use |
| Product code | SLE/HLI/011 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A burette set sits between the fluid bag and the patient line and holds only the volume that is meant to run. The nurse fills the graduated chamber from the bag to the prescribed mark, closes the upper clamp, and lets that measured amount drip through. When the chamber empties, the automatic shut-off valve closes so the drip chamber and tubing do not fill with air. This makes the set a common choice for children, fluid-restricted patients and medicines that must be diluted and given slowly.
The 60 drops/ml drop chamber gives small, countable drops, which makes slow rates easier to set by hand with the flow regulator. Medicines can be added through the injection portal into the burette or line under clinical direction. Nursing schools use burette sets to teach volume-controlled infusion and drip-rate calculation, and hospitals buying from a lab consumables supplier in India often keep them alongside standard giving sets.
Jain Scientific Equipments Private Limited, trading as ScienceLab in Ambala, Haryana, supplies this burette giving set to hospitals, paediatric units, training colleges and distributors. Buyers can combine it with infusion stands, syringes and dressings on one quotation. Company background is available on the ScienceLab profile page.
Items that support a volume-controlled infusion:
Find more in the Medical Consumables & Dressings category.
What is the burette capacity of the Infusion Giving Set, W/Burette, Sterile?
The Infusion Giving Set, W/Burette, Sterile has a transparent polystyrene graduated chamber of approximately 100-150 ml, marked every millilitre, so the volume to be infused can be measured before it runs.
What drop factor does the burette infusion set have?
The burette infusion set has a drop-counting chamber calibrated at 60 drops/ml, located under the graduated chamber and fitted with a 15 µ polyamide filter. The small drop size helps when slow flow rates are set by hand.
What does the automatic shut-off valve do?
The automatic shut-off valve on the Infusion Giving Set, W/Burette, Sterile stops the infusion as soon as the pre-set volume has left the burette, preventing air from entering the drop-counting chamber and the tube.
How long is the tubing on the burette giving set?
The burette giving set has kink-resistant transparent PVC tubing of approximately 150 cm, with an internal diameter of about 3 mm and an external diameter of about 4 mm. The overall set length is approximately 170 cm.
How is this set different from the standard infusion giving set?
The Infusion Giving Set, W/Burette, Sterile adds a graduated burette, a shut-off valve and a 60 drops/ml drop chamber, whereas the standard ScienceLab giving set runs directly from the bag through a 20 drops/ml chamber. Choose the burette set when measured volumes matter.
Who supplies the Infusion Giving Set, W/Burette, Sterile?
The Infusion Giving Set, W/Burette, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, colleges and distributors in India and international markets. Ask us for pack quantity and the batch expiry date when requesting a quote.
For pricing on the Infusion Giving Set, W/Burette, Sterile, send your quantity through the contact page or add the set to the enquiry cart with other infusion items.
Last updated: 24 September 2026
Syringe, Disposable, 5ml, Sterile (Product Code: SLE/HLI/012) is a single-use plastic syringe used to measure, draw up and inject everyday fluid volumes up to 5 ml in hospitals, dispensaries and nursing or pharmacy practical rooms. It is moulded in medical grade plastic with a transparent barrel and a centrally placed nozzle offered as Luer lock or Luer slip. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for buyers stocking disposable lab equipment in India.
| Parameter | Detail |
|---|---|
| Capacity | 5 ml |
| Graduation | Easy-to-read graduated scale on the barrel; scale intervals of 0.2 or 0.5 ml; graduation lines at 1.0 ml volume |
| Material | Medical grade plastic: polyethylene (PE), polypropylene (PP) or polystyrene (PS) |
| Barrel | Transparent enough to measure the contained volume easily and detect air bubbles |
| Nozzle | Luer lock or Luer slip, situated centrally |
| Condition | Disposable; sterile (as named) |
| Product code | SLE/HLI/012 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
The 5 ml size is the general-purpose workhorse of a ward or dispensary: large enough for most single injection volumes and for drawing up small amounts of diluent, yet small enough to read comfortably. Staff fit a sterile needle, draw up the prescribed volume, tap out air bubbles through the clear barrel and check the reading against the scale before use.
The nozzle choice matters. A Luer lock nozzle has a threaded collar, so the needle or connector is twisted on and held firmly, which suits connections to IV ports and lines. A Luer slip nozzle is a plain push-fit taper that is quick to use for routine injections. Nursing and pharmacy labs often stock 5 ml syringes in quantity because students use them in dosage-calculation and injection-technique exercises.
This 5 ml disposable syringe comes from Jain Scientific Equipments Private Limited, an Ambala, Haryana company trading as ScienceLab. The company supplies it to hospitals, clinics, colleges and stockists that prefer a single supplier for syringes, needles, infusion sets and dressings. Visit the ScienceLab profile to learn more.
Commonly ordered with the 5 ml syringe:
See all items in Medical Consumables & Dressings.
Is the Syringe, Disposable, 5ml, Sterile Luer lock or Luer slip?
The Syringe, Disposable, 5ml, Sterile is listed with either a Luer lock or a Luer slip nozzle, situated centrally on the barrel. Tell us which type you need when you ask for a quotation.
What is the scale on the 5 ml disposable syringe?
The 5 ml disposable syringe has an easy-to-read graduated scale on the barrel with scale intervals of 0.2 or 0.5 ml and graduation lines at each 1.0 ml, so the full 5 ml can be read clearly.
What plastic is the 5 ml syringe made of?
The 5 ml syringe is made from medical grade plastic, listed as polyethylene (PE), polypropylene (PP) or polystyrene (PS). The barrel is transparent enough to read the volume and spot air bubbles.
Does the Syringe, Disposable, 5ml, Sterile include a needle?
A needle is not listed as part of the Syringe, Disposable, 5ml, Sterile. Add loose disposable needles from the same ScienceLab range to your enquiry if you need them, stating the gauge required.
Who supplies the Syringe, Disposable, 5ml, Sterile?
The Syringe, Disposable, 5ml, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, dispensaries, colleges and distributors in India and international markets. Ask us for the pack size, sterilisation method and batch expiry date.
Send the nozzle type and quantity for the Syringe, Disposable, 5ml, Sterile through the ScienceLab contact form, or collect it with other consumables in the enquiry cart.
Last updated: 24 September 2026
Needle, Disposable, 21G, Sterile (Product Code: SLE/HLI/013) is a single-use stainless steel hypodermic needle, sterilised with ethylene oxide, used on Luer syringes to inject or withdraw fluids in hospitals, clinics and clinical-skills labs. Measuring 21G x 1 1/2 inch (0.8 x 40 mm), it is longer than the 23G needle in the same range, and its size is identified by a colour code on the base. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Size | 21G x 1 1/2 inch (0.8 x 40 mm) |
| Needle material | Stainless steel |
| Base and protective cap | Medical grade plastic |
| Size marking | External diameter in gauge and millimetres; length in inches and millimetres |
| Colour code | Visible at the base of the needle |
| Sterilisation | Sterile (ethylene oxide sterilisation) |
| Use | Disposable, single use |
| Product code | SLE/HLI/013 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
The 21G x 1 1/2 inch needle is a middle-of-the-range size: wider than 23G, finer than 19G, and at 40 mm long it is the longer of the two needle sizes listed with a length. Clinicians commonly reach for this size for general injections and for withdrawing blood or other fluids, pairing it with 5 ml, 10 ml or 20 ml syringes. As always, gauge and length are chosen by the treating professional for each patient and procedure.
The coloured base is a practical safety feature on a busy trolley: staff can confirm the size at a glance without reading the small print on the pack. In nursing and phlebotomy training, the 21G needle is widely used to demonstrate attaching a needle, removing the cap safely and disposing of sharps. Institutions that order from a lab consumables supplier in India usually keep it in stock beside the 19G and 23G sizes.
Jain Scientific Equipments Private Limited, operating as ScienceLab from Ambala, Haryana, supplies the 21G disposable needle to hospitals, health programmes, colleges and distributors. It can be quoted together with syringes, tourniquets and sharps containers so that a complete injection or sampling kit comes from one source. See the ScienceLab profile page for company details.
Useful companions for a 21G needle:
Browse the Medical Consumables & Dressings category for more.
What size is the Needle, Disposable, 21G, Sterile?
The Needle, Disposable, 21G, Sterile is 21G x 1 1/2 inch, which is 0.8 mm external diameter and 40 mm long. Its size is shown in gauge and millimetres for diameter, and in inches and millimetres for length.
How is the 21G disposable needle sterilised?
The 21G disposable needle is listed as sterile by ethylene oxide sterilisation. Ask ScienceLab for the batch expiry date and pack details when you request a quotation, so your stores team can plan stock rotation.
How can staff identify the 21G needle quickly?
The Needle, Disposable, 21G, Sterile carries a colour code visible at the base of the needle, so staff can recognise the gauge at a glance and avoid mixing it up with other needle sizes on the trolley.
What is the 21G needle made of?
The 21G needle has a stainless steel shaft, and both its base and protective cap are made of medical grade plastic. The base fits standard Luer syringe nozzles.
Who supplies the Needle, Disposable, 21G, Sterile?
The Needle, Disposable, 21G, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to hospitals, colleges, NGOs and distributors in India and international markets. Send your required quantity through the contact page for a quotation.
Request pricing for the Needle, Disposable, 21G, Sterile by sending your quantity via the contact page, or add it to the enquiry cart along with matching syringes.
Last updated: 24 September 2026