Infusion Pump With Accessories (Product Code: SLE/RAE/14) is a portable, single-channel volumetric infusion pump used to deliver IV fluids at a programmed rate in wards, intensive care and operating theatres. Its peristaltic mechanism covers 1–1,200 ml/h in 1 ml/h steps with ±5 % accuracy, and it works with commercial infusion sets on mains or battery power. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Type | Volumetric, single channel, portable; peristaltic pump with continuous delivery |
| Flow-rate range | At least 1–1,200 ml/h, in 1 ml/h steps |
| Flow-rate accuracy | ± 5 % |
| Programming | By volume, time and flow rate |
| Volume limit | 1–9,999 ml, in 1 ml steps |
| Bolus program | 100–900 ml/h |
| KVO program | 1 ml/h for infusion rates < 10 ml/h; 3 ml/h for rates > 10 ml/h |
| Infusion sets | Open system, compatible with commercial infusion sets |
| Safety detection | Air bubble detection; occlusion detection; automatic self-test |
| Alarms | Audio/visual with silencing: occlusion, air-in-line, door open, infusion/program status and end, battery/power status and failure, system errors |
| Display | Display and control panel showing program, volume, flow, time and system messages |
| Mounting | Rail and IV pole mount |
| Battery | Integrated charger; autonomy > 5 h at 30 ml/h; automatic switch between AC and battery and automatic recharge on mains |
| Power | 110–220 V / 50–60 Hz; consumption 25 W |
| Enclosure | Sturdy plastic, splash- and shock-proof |
| Product code | SLE/RAE/14 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A volumetric pump replaces gravity drip counting when a fluid must run at a controlled rate. The nurse loads a standard infusion set into the peristaltic channel, closes the door and enters either a rate, or a volume and time, and the pump delivers continuously while showing progress on the display. The volume limit stops delivery at the prescribed total, after which the KVO program keeps the line open at 1 or 3 ml/h.
Air-in-line and occlusion detection trigger an alarm if a bubble or blockage is found, and a door-open alarm warns when the set compartment is not closed. With over 5 hours of battery at 30 ml/h, the pump can stay with a patient during transfers. Prescribing and programming remain the responsibility of trained clinical staff.
Jain Scientific Equipments Private Limited, trading as ScienceLab in Ambala, Haryana, supplies infusion pumps like this one to hospitals, surgical centres and health programmes. We can also quote the stands and giving sets that go with them so that a ward receives a complete infusion set-up. Visit the profile page to learn about the company.
Items commonly ordered with an infusion pump:
Browse all Resuscitation & Operating Theatre Equipment.
What flow rates can the Infusion Pump With Accessories deliver?
The Infusion Pump With Accessories delivers at least 1–1,200 ml/h in 1 ml/h steps with an accuracy of ±5 %. A separate bolus program runs from 100 to 900 ml/h, and the volume limit can be set from 1 to 9,999 ml.
Which infusion sets work with the Infusion Pump With Accessories?
The Infusion Pump With Accessories is an open system compatible with commercial infusion sets, so it is not tied to one brand of dedicated set. Tell us which sets you use and we will confirm suitability before you order.
What safety alarms does the Infusion Pump With Accessories have?
The Infusion Pump With Accessories detects air bubbles and occlusions and gives audio/visual alarms, with silencing, for occlusion, air-in-line, door open, end of infusion or program, battery and power status, and system errors.
How long does the Infusion Pump With Accessories run on battery?
The Infusion Pump With Accessories runs for more than 5 hours on battery at 30 ml/h. It switches between AC and battery automatically, recharges through its integrated charger on mains, and draws 25 W.
What is the KVO setting on the Infusion Pump With Accessories?
KVO (keep vein open) on the Infusion Pump With Accessories runs at 1 ml/h when the infusion rate is below 10 ml/h and 3 ml/h when it is above 10 ml/h, helping keep the line patent after the programmed volume.
Who supplies the Infusion Pump With Accessories?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Infusion Pump With Accessories to hospitals, clinics and health programmes in India and international markets, together with stands and giving sets when requested.
For pricing on the Infusion Pump With Accessories, send the quantity, mounting type and destination via the contact page, or add the pump to your enquiry cart.
Last updated: 24 September 2026