- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Jacketed Vessel and Coil
Jacketed Vessel and Coil (Product Code: SLE/EA/13) is a process-style heat exchanger used to show how a stirred vessel is heated either through its outer jacket or through an internal coil in chemical and mechanical engineering laboratories. Students run it with a continuous feed or a fixed batch, using a motorised stirrer and a dedicated batch thermocouple to see how agitation changes heat transfer. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM and technical educational equipment manufacturer, at its own factory in Ambala, India.
Key Details
| Parameter | Detail |
|---|---|
| Type | Heat exchanger that mimics those used in the process industry |
| Heating methods | Through the outer skin (‘jacket’) of the vessel, or through a coil inside the vessel |
| Operating modes | Continuous feed to the vessel for heating, or a fixed batch |
| Agitation | Motorised stirrer to show how stirring affects heat transfer |
| Temperature measurement | Extra thermocouple to measure the batch temperature |
| Fluid connections | Self-sealing quick connectors between the Service Module and the heat exchanger, for safety and simplicity |
| Error-proofing | Hot and cold fluid streams use different connectors |
| Product code | SLE/EA/13 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Jacketed Vessel and Coil Used For?
The unit recreates the stirred-tank heating found across the process industry, so students can compare jacket heating with coil heating in the same vessel. Switching the motorised stirrer on and off between runs shows clearly how agitation raises the rate of heat transfer to the liquid.
In batch mode, a fixed charge is heated and the extra thermocouple tracks the batch temperature over time; with continuous feed, liquid flows through while it is heated, giving a steady-state comparison. Always couple the hot and cold streams to their own connectors, which are deliberately different to prevent mix-ups. This makes it a realistic piece of engineering lab equipment in India for unit-operations teaching.
What to Specify When Ordering
- Whether you also need the Service Module that supplies the hot and cold fluid streams through the quick connectors.
- Which other heat exchangers from the same range you want for side-by-side comparison.
- The number of units required for your laboratory.
OEM Manufacturer
Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, is the OEM (original equipment manufacturer) of the Jacketed Vessel and Coil and builds it at its own licensed factory at Saha, Ambala, Haryana, India. Colleges setting up a unit-operations or heat transfer lab can have this vessel quoted together with other exchangers from the same range, all from one manufacturer. Dealers and importers are supplied factory-direct too. See our company profile for more background.
Related Thermodynamics & Heat Transfer Lab Equipment
Other heat exchangers and services that fit the same practical programme:
- Heat Exchanger — the hot and cold water service unit for the heat exchanger range.
- Shell and Tube Heat Exchanger — a common industrial design for comparison with jacket heating.
- Plate Heat Exchanger — a compact alternative built from gasketed plates.
- Concentric Tube Heat Exchanger — the simplest tube-in-tube layout for baseline tests.
View all Thermodynamics & Heat Transfer Lab Equipment.
Frequently Asked Questions
Can the vessel be heated by both the jacket and the coil?
Yes. The Jacketed Vessel and Coil can transfer heat through the outer skin, or jacket, of the vessel or through a coil inside it, so students can compare the two methods on the same batch of liquid.
Does it run in batch or continuous mode?
The Jacketed Vessel and Coil works both ways: you can set a fixed batch for heating or run a continuous feed through the vessel, which lets students compare transient batch heating with steady continuous operation.
What does the motorised stirrer show?
The motorised stirrer on the Jacketed Vessel and Coil demonstrates how stirring affects heat transfer. Running the same test with and without agitation shows students why stirred vessels are standard practice in the process industry.
Does the Jacketed Vessel and Coil need a service module?
The Jacketed Vessel and Coil is designed to connect to a Service Module through self-sealing quick connectors for its hot and cold fluid streams. Ask us through the contact page which service unit to include in your quotation.
How are connection errors prevented?
All fluid connections on the Jacketed Vessel and Coil use self-sealing quick connectors, and the hot and cold streams have different connector types, so students cannot easily swap them and set-up stays safe and simple.
Who manufactures the Jacketed Vessel and Coil?
The Jacketed Vessel and Coil is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, India, and quotations are issued directly by the manufacturer to institutions and trade buyers.
Request a Quote
Ask for a quotation for the Jacketed Vessel and Coil on our contact page or add it to the enquiry cart along with any companion exchangers. The manufacturer replies directly, for delivery within India and to international markets.
Last updated: 24 September 2026
