The Mass, Cast Alloy, 1000g supplies one kilogram of load as nine 100 g slotted masses and a 100 g hanger, all in cast alloy. Loads rise in equal steps from 100 g with the hanger alone to 1000 g, and the small format pieces move easily between a trolley and the hanger in dynamics work.
| Parameter | Detail |
|---|---|
| Type | Small format cast alloy mass and hanger set |
| Material | Cast alloy |
| Total mass | 1000g |
| Contents | 9 x 100g slotted masses, 1 x 100g hanger |
| Product code | SLE/LB/34 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Force and acceleration at constant mass. Load a plastic dynamics trolley with eight of the masses and hang the hanger plus one mass from a cord over a ball bearing bench pulley. Release it, find the acceleration, then move one mass at a time from trolley to hanger. The pulling force rises while the total mass stays fixed.
Beam reactions. Support the beam of the moments kit from two spring balances and hang the cast alloy hanger at a measured point along it. Add 100 g masses one by one and check that the two support readings always add up to the weight of beam and load.
Newton's second law relates force to the whole mass being accelerated, and that includes the hanger as well as the trolley. Transferring pieces raises the pulling force while the total mass stays the same, so acceleration against force gives a straight line.
The slope of acceleration against force equals one divided by the total mass being accelerated: the trolley, the masses on it and the hanger with its load. Reading it as the trolley mass alone gives a wrong answer. Friction shifts the line off the origin, so first tilt the runway until the trolley rolls at a steady speed with nothing hanging.
Use the change in velocity divided by the time taken, not one average speed for the whole run. For a trolley starting from rest, acceleration equals twice the distance travelled divided by the square of the time.
Weigh the full stack on a balance before the lesson. The hanger and all nine masses together should read close to one kilogram, so a missing piece or a mass borrowed from another set shows up at once.
Both give a 100 g hanger and nine 100 g masses, so experiments run the same way with either. Match the material to the sets your department already uses; the Mass Set, Brass, 1000g is the brass version.
Place a box or soft pad under the hanger so it does not strike the floor, and catch the trolley by hand before it reaches the pulley. Keep feet clear of the drop while the run is in progress.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026