- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Pillar Drilling Machine
Pillar Drilling Machine (Product Code: SLE/MCE/06) is a floor-standing column drill used to drill holes up to 25 mm in diameter in engineering, vocational and school workshops. Training workshops use it for everyday drilling exercises, and it combines a 1 HP motor and 8 spindle speeds with a 330 x 330 mm table that travels 480 mm on a 92 mm column. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Drilling capacity | 25 mm maximum |
| Main electrical motor | 1 HP |
| Number of spindle speeds | 8 |
| Spindle speed range | 70–2000 RPM or 130–2600 RPM |
| Spindle travel | 250 mm |
| Column diameter | 92 mm |
| Table size | 330 x 330 mm |
| Table travel | 480 mm |
| Centre of spindle to column | 250 mm (max.) |
| Distance spindle to table | 645 mm or 660 mm |
| Distance spindle to base | 1000 mm or 1045 mm |
| Base size (machined area) | 255 x 310 mm |
| Overall height with guard | 1780 mm |
| Listed features | Consistent drilling and hole accuracy, low noise and vibration, low maintenance |
| Product code | SLE/MCE/06 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Pillar Drill Used For?
A pillar drill holds the drilling head on a vertical column above an adjustable table, so holes are drilled square to the work and in the right place far more reliably than with a hand drill. The table slides up and down the column to suit the job, while the operator feeds the drill down through up to 250 mm of spindle travel. It is the standard machine for marking-out and drilling exercises in fitting shops, and for general drilling in maintenance workshops.
Choose the spindle speed to suit the drill: lower speeds for larger drills and harder metals, higher speeds for small drills. Always clamp the workpiece, keep the guard in place and remove the chuck key before starting. For vocational training workshops, the 1780 mm overall height and compact base make it straightforward to position several machines along a wall.
What to Specify When Ordering
- Spindle speed range: 70–2000 RPM or 130–2600 RPM.
- Working height needed (spindle to table 645 or 660 mm; spindle to base 1000 or 1045 mm).
- Your electrical supply for the 1 HP motor, as the voltage is not listed.
- Number of machines and delivery location.
Supplier
Jain Scientific Equipments Private Limited, which trades under the ScienceLab name, supplies the Pillar Drilling Machine to schools, ITIs, polytechnics, engineering colleges, maintenance workshops, dealers and importers in India and international markets. Multiple machines for a new workshop can be covered in one quotation.
More details are available on the ScienceLab company profile.
Related Workshop Machine Tools
These machines extend what a workshop can do beyond everyday drilling:
- Radial Drill Machine — for larger holes and heavy workpieces that do not fit a pillar drill.
- Tool And Cutter Grinding Machine — can resharpen drill points with extra accessories.
- Boring machine — finishes drilled holes to an accurate diameter.
- Caliper Vernier (Metal) — for marking out and checking hole positions and sizes.
Explore all Workshop Machine Tools.
Frequently Asked Questions
What is the drilling capacity of the Pillar Drilling Machine?
The Pillar Drilling Machine drills holes up to 25 mm in diameter, driven by a 1 HP motor, with 250 mm of spindle travel for feeding the drill through thicker workpieces.
What spindle speeds does the Pillar Drilling Machine have?
The Pillar Drilling Machine has 8 spindle speeds, and the speed range is listed as either 70–2000 RPM or 130–2600 RPM. State which range you prefer when you ask for a quotation.
What are the table and working dimensions of the Pillar Drilling Machine?
The Pillar Drilling Machine has a 330 x 330 mm table with 480 mm travel on a 92 mm column, 250 mm from spindle centre to column, and 645 or 660 mm from spindle to table.
How much space does the Pillar Drilling Machine need?
The Pillar Drilling Machine stands 1780 mm high with its guard and has a machined base area of 255 x 310 mm, so it fits along a workshop wall; allow working space around it for the operator.
Is the Pillar Drilling Machine suitable for student workshops?
Yes. The Pillar Drilling Machine is listed for consistent drilling, hole accuracy, low noise and vibration and low maintenance, which suits supervised training in schools, ITIs and colleges when guards and clamping are used correctly.
Who supplies the Pillar Drilling Machine?
The Pillar Drilling Machine is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to schools, training institutes, colleges, workshops, dealers and importers in India and international markets.
Request a Quote
Ask for a Pillar Drilling Machine quotation via the contact page or add it to the enquiry cart, with the speed range and number of machines required.
Last updated: 24 September 2026
