- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Radial Drill Machine
Radial Drill Machine (Product Code: SLE/MCE/04) is a column-and-arm drilling machine used to drill and tap large holes in big or heavy workpieces without repositioning the work, in engineering workshops, fabrication shops and technical training institutes. It drills up to 65 mm (70 mm in cast iron) and taps up to 50 mm in steel, with the spindle reaching 700 to 1700 mm from the column centre. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Drilling capacity | 65 mm |
| Drilling capacity in cast iron | 70 mm |
| Tapping in steel | 50 mm |
| Spindle travel | 300 mm |
| Spindle speeds | 9 speeds, 50–805 rpm |
| Range of power feed | 0–115 (as listed) |
| Optional feed | 0.13–1.10 (as listed) |
| Column diameter | 330 mm |
| Horizontal movement of radial arm | 660 mm |
| Horizontal movement of drilling head | 1000 mm |
| Spindle nose to base plate (max / min) | 1120 / 460 mm |
| Spindle centre to column centre (max / min) | 1700 / 700 mm |
| Box table | Working surface 560 x 460 mm; height 400 mm |
| Base plate | 2050 x 990 mm (L x W); working surface 1400 x 850 mm; height 210 mm |
| Drilling head motor | 5 HP, 1440 RPM |
| Elevator motor | 3 HP, 1440 RPM |
| Total height of machine | 2440 mm (approx.) |
| Product code | SLE/MCE/04 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Radial Drill Used For?
On a radial drill the drilling head slides along an arm that swings around a vertical column, and the elevator motor raises or lowers the arm. The operator can therefore bring the spindle over any hole position on a large casting, plate, flange or machine base clamped on the base plate or box table, instead of moving a heavy workpiece under a fixed spindle. The same machine handles drilling, enlarging and tapping of large holes.
In workshop training, students learn to choose among the 9 spindle speeds to suit drill size and material, engage the power feed for steady penetration, and lock the arm and head before cutting. Plan the installation carefully: the base plate measures 2050 x 990 mm and the machine stands about 2440 mm tall, so floor space and overhead clearance both matter.
What to Specify When Ordering
- The largest hole you need to drill or tap, compared with the listed 65 mm, 70 mm (cast iron) and 50 mm (tapping) capacities.
- Your largest workpiece, checked against the 700–1700 mm spindle reach and 460–1120 mm spindle-to-base range.
- The electrical supply for the 5 HP and 3 HP motors, as voltage is not stated in the listing.
- Quantity and delivery location in India or abroad.
Supplier
Jain Scientific Equipments Private Limited trades as ScienceLab and supplies the Radial Drill Machine to engineering colleges, polytechnics, ITIs, maintenance and fabrication workshops, dealers and importers in India and international markets. Workshop machines can be quoted together with laboratory apparatus in a single offer.
Learn more about the company on the ScienceLab company profile.
Related Workshop Machine Tools
These machines complement a radial drill in a machining or fabrication workshop:
- Pillar Drilling Machine — a smaller drill for everyday holes up to 25 mm.
- Boring machine — enlarges and finishes bores to a precise diameter.
- Universal Milling Machine — machines faces and slots on the same heavy parts.
- Tool And Cutter Grinding Machine — can regrind drill points with extra accessories.
Browse all Workshop Machine Tools.
Frequently Asked Questions
What is the drilling capacity of the Radial Drill Machine?
The Radial Drill Machine is listed with a drilling capacity of 65 mm, rising to 70 mm in cast iron, and can tap holes up to 50 mm in steel, with 300 mm of spindle travel for deep holes.
How far can the Radial Drill Machine reach?
The Radial Drill Machine places the spindle centre between 700 mm and 1700 mm from the column centre, with 1000 mm horizontal movement of the drilling head and a spindle nose 460 mm to 1120 mm above the base plate.
What speeds and feeds does the Radial Drill Machine offer?
The Radial Drill Machine has 9 spindle speeds from 50 to 805 rpm. Its power feed range is listed as 0–115 and an optional feed as 0.13–1.10, without units, so ask us to confirm the feed details.
What motors does the Radial Drill Machine use?
The Radial Drill Machine uses a 5 HP, 1440 RPM drilling head motor and a 3 HP, 1440 RPM elevator motor that raises and lowers the arm. The supply voltage is not listed, so confirm your workshop supply with us.
How much space does the Radial Drill Machine need?
The Radial Drill Machine has a 2050 x 990 mm base plate with a 1400 x 850 mm working surface, a 560 x 460 mm box table and a total height of about 2440 mm, so check floor area and ceiling clearance.
Who supplies the Radial Drill Machine?
The Radial Drill Machine is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to engineering colleges, training institutes, workshops, dealers and importers in India and international markets.
Request a Quote
To get a price for the Radial Drill Machine, contact us via the contact page or add it to the enquiry cart with your capacity and delivery details.
Last updated: 24 September 2026
