- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Defibrillator Basic With Accessories
Defibrillator Basic With Accessories (Product Code: SLE/RAE/10) is a portable external defibrillator with built-in ECG monitor and printer, used to deliver manual or synchronised biphasic shocks to adult and paediatric patients in emergency rooms, wards and on resuscitation trolleys. It runs on mains or a removable rechargeable battery and comes with adult and paediatric pads or adapters. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Patients | Adult and paediatric; supplied with adult and paediatric pads/adapters |
| Defibrillation modes | Manual and synchronised; biphasic energy waveform; non-directional pads |
| Energy output range | 2–200 J or 2–360 J (depending on model); adjustable in steps; adult and paediatric settings |
| Energy output accuracy | ± 15 % |
| Patient resistance range | At least 30–175 ohm, with load compensation (energy adjusts automatically to patient impedance) |
| Charge time to maximum energy | < 10 s (mains supply, battery charged) |
| ECG monitor | Detection through pads or dedicated 3-lead ECG cable; gain 2.5, 5, 10 and 20 mm/mV; waveform and analysis with selectable views; protected against defibrillation discharges |
| Printer | Built-in 3-channel thermal printer; paper width 58 or 72 mm (depending on model); paper speed 25 mm/s; prints ECG curves and analysis, events, settings and alarms; real-time and manual print modes |
| Internal memory | ECG, events (at least 500 or 60 min of monitoring) and parameters |
| Display | Backlit flat panel, 5–8 inch: mode, energy, ready/charging state, ECG curves, heart rate, date/time, settings, power status and alarms |
| Alarms and checks | Audio/visual alarms for pads connection, mains/battery status, paper and printer status, system errors; automatic and manual self-test; continuous pad and electrode connection check; internal safety discharge |
| Interface | Data/USB communication |
| Optional modes (not included) | Compatible with SAED, AED and pacing modes and SpO2 |
| Power | 110–220 V / 50–60 Hz; 200 W; integrated charger and transformer; automatic switch to battery on power failure and recharge on mains |
| Battery | Removable, rechargeable; more than 100 shocks at 200 J or 3.5 h of monitoring |
| Construction | Portable with integrated carry handle; splash and shock resistant |
| Product code | SLE/RAE/10 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is a Basic Defibrillator Used For?
A defibrillator of this type is part of a hospital's resuscitation equipment. In manual mode the trained operator reads the ECG on screen, selects the energy and delivers a biphasic shock through the pads; in synchronised mode the shock is timed to the patient's ECG, which is how clinicians perform cardioversion. The same unit doubles as an ECG monitor, and the thermal printer records strips and events for the patient's notes.
Because it switches to battery automatically and the battery lasts for over 100 shocks at 200 J, the defibrillator can move with a patient between departments. Automatic and manual self-tests, together with the continuous pad-connection check, help staff confirm readiness. The unit should be used only by personnel trained in resuscitation and in line with the facility's own protocols.
What to Specify When Ordering
- Energy output range needed: 2–200 J or 2–360 J.
- Printer paper width: 58 mm or 72 mm, depending on the model available.
- Whether you need SAED, AED, pacing or SpO2 functions, which are not part of this basic specification.
- Quantity of units and the mains supply at your site.
Supplier
This defibrillator is supplied by Jain Scientific Equipments Private Limited, which does business as ScienceLab from Ambala, Haryana. Emergency departments, hospitals and health projects can ask us to match the energy range and printer model to their requirement before the quotation is issued. See our profile for company details.
Related Resuscitation & Operating Theatre Equipment
A resuscitation trolley built around this defibrillator typically also carries:
- Adult Resuscitator Hand Operated Set — for manual ventilation during resuscitation.
- Laryngoscope Child / Adult Set — for airway management in adults and children.
- Guedel Airway Sterile Single Use — to keep the airway open.
- Suction Pump Foot Operated Single Piston — airway suction that works without electricity.
- Portable Patient Monitor With Accessories — continued multi-parameter monitoring after the event.
View the whole Resuscitation & Operating Theatre Equipment category.
Frequently Asked Questions
What energy range does the Defibrillator Basic With Accessories deliver?
The Defibrillator Basic With Accessories delivers biphasic energy of 2–200 J or 2–360 J depending on the model, adjustable in steps, with an output accuracy of ±15 % and a charge time to maximum energy under 10 seconds.
Can the Defibrillator Basic With Accessories be used on children?
Yes. The Defibrillator Basic With Accessories has adult and paediatric energy settings and is supplied with adult and paediatric pads or adapters. Selection of energy for any patient remains a clinical decision for trained staff.
Does the Defibrillator Basic With Accessories include AED mode or SpO2?
No. The Defibrillator Basic With Accessories is compatible with SAED, AED and pacing modes and SpO2, but these are not included in the basic specification. Tell us through the contact page if you need them.
How long does the battery of the Defibrillator Basic With Accessories last?
The removable rechargeable battery of the Defibrillator Basic With Accessories gives more than 100 shocks at 200 J or 3.5 hours of monitoring. The unit switches to battery automatically when mains fails and recharges when reconnected.
What does the printer on the Defibrillator Basic With Accessories record?
The built-in 3-channel thermal printer of the Defibrillator Basic With Accessories prints ECG curves and analysis, events, settings and alarms at 25 mm/s, on 58 or 72 mm paper depending on the model, in real-time or manual mode.
Is a calibration certificate available for the Defibrillator Basic With Accessories?
Documentation for the Defibrillator Basic With Accessories depends on the model supplied. Please discuss any calibration or energy-test paperwork you need with us before ordering, so we can confirm what can be provided with the unit.
Who supplies the Defibrillator Basic With Accessories?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Defibrillator Basic With Accessories to hospitals, emergency services and health programmes in India and international markets, with the energy range and printer model confirmed on each quotation.
Request a Quote
Ask for a quotation on the Defibrillator Basic With Accessories by sending the required energy range, quantity and destination through the contact page, or add it to your enquiry cart.
Last updated: 24 September 2026
