- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Flow Splitter For Oxygen Concentrator
Flow Splitter For Oxygen Concentrator (Product Code: SLE/RAE/17) is a five-outlet oxygen flow splitter used to share one oxygen concentrator or supply among several patients in wards and health centres. Each of its 5 outlets has its own flowmeter adjustable from 0.125 to 2 l/min, so every patient's flow is set independently. It accepts an input pressure of 48–345 kPa and mounts on a table or wall. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Configuration | 1 inlet, 5 outlets |
| Flowmeters | 5 independent flowmeters, range 0.125–2 l/min |
| Supply connection | To a single oxygen supply or concentrator |
| Outlet behaviour | Independent outlets; cumulative maximum flow is limited by the supply flow |
| Input pressure | 48–345 kPa |
| Mounting | Tabletop or wall mount |
| Product code | SLE/RAE/17 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is an Oxygen Flow Splitter Used For?
Many patients need only a small, steady oxygen flow, often well below what a concentrator can produce. A flow splitter makes better use of that capacity: the concentrator outlet is connected to the single inlet, and up to five patients are connected to the outlets, each through their own tubing and nasal prongs. Staff then set each flowmeter between 0.125 and 2 l/min according to the individual prescription.
The key planning rule is that the outlets share the supply. If five patients are each set to 2 l/min, the source must be able to provide at least 10 l/min, and the pressure reaching the inlet must stay within 48–345 kPa. Mounting the splitter on a wall between beds, or on a bedside table, keeps the flowmeters visible so nurses can check every outlet on their rounds.
What to Specify When Ordering
- Mounting method: tabletop or wall.
- The oxygen source it will be connected to, and its maximum flow and output pressure.
- Number of splitters, and the tubing and nasal prongs needed for each outlet in use.
Supplier
Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies this flow splitter to hospitals, district health centres and oxygen-access projects. Buyers setting up shared oxygen can ask us to quote the splitter together with concentrators and patient interfaces in one order. Company details are on our profile page.
Related Resuscitation & Operating Theatre Equipment
A shared oxygen set-up built around this splitter usually includes:
- Oxygen Concentrator — the supply, with an adjustable output of up to 10 LPM.
- Adult Nasal Prong Oxygen Single Use — a patient interface for each outlet.
- Reusable Humidifier Bottle Non Heated — for humidifying the oxygen where required.
- Ultrasonic Oxygen Analyzer Handheld — to spot-check concentration and flow from the source.
- Oxygen Flow Meter 0 – 15 LPM — for a single patient needing higher flow from a piped or cylinder supply.
Visit the Resuscitation & Operating Theatre Equipment category for more.
Frequently Asked Questions
How many patients can use the Flow Splitter For Oxygen Concentrator?
The Flow Splitter For Oxygen Concentrator has 1 inlet and 5 independent outlets, each with its own flowmeter, so up to five patients can be connected, provided the total of their flows does not exceed what the oxygen supply can deliver.
What flow range does each outlet of the Flow Splitter For Oxygen Concentrator cover?
Each of the five flowmeters on the Flow Splitter For Oxygen Concentrator adjusts from 0.125 to 2 l/min, allowing low, individually set oxygen flows for each patient connected to the splitter.
What input pressure does the Flow Splitter For Oxygen Concentrator need?
The Flow Splitter For Oxygen Concentrator works with an input pressure of 48–345 kPa. Check that the concentrator or oxygen supply you plan to connect delivers pressure within this range before installation.
Can the Flow Splitter For Oxygen Concentrator be wall mounted?
Yes. The Flow Splitter For Oxygen Concentrator is suitable for either tabletop use or wall mounting, so it can sit on a bedside table or be fixed to the wall between beds in a ward.
Does the Flow Splitter For Oxygen Concentrator increase the oxygen available?
No. The Flow Splitter For Oxygen Concentrator only divides the oxygen it receives; the cumulative maximum flow from all outlets is limited by the supply flow, so the source must match the combined prescriptions.
Who supplies the Flow Splitter For Oxygen Concentrator?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Flow Splitter For Oxygen Concentrator to hospitals, health centres and oxygen programmes in India and international markets, alone or with matching concentrators.
Request a Quote
For a quotation on the Flow Splitter For Oxygen Concentrator, send the quantity, mounting preference and delivery location through the contact page, or add it to the enquiry cart.
Last updated: 24 September 2026
