- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Neonatal incubator Automatic With Accessories
Neonatal incubator Automatic With Accessories (Product Code: SLE/RAE/08) is a double-wall, mobile, electronically controlled incubator used to keep a newborn in a warm, stable microenvironment in neonatal and maternity units. Nursing teams can run it in servo air-temperature, servo skin-temperature or manual mode, with settings adjustable in 0.1 °C steps. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospital tenders and bulk supply.
Specifications
| Parameter | Detail |
|---|---|
| Type | Double-wall neonatal incubator, electronic, automatic, mobile |
| Control modes | Servo-controlled air temperature; servo-controlled skin temperature; manual |
| Air temperature setting | 25–37 °C, override up to 39 °C, 0.1 °C increments |
| Skin temperature setting | 34–36 °C, override up to 38 °C, 0.1 °C increments |
| Skin temperature sensor accuracy | ± 0.3 °C |
| Temperature variability (set vs real) | ± 0.5 °C |
| Temperature uniformity at mattress level | < 0.8 °C |
| Warm-up time | < 30 min to 37 °C in 22 °C ambient |
| Air velocity over the bed | < 0.35 m/s |
| Humidification | Integrated water chamber: passive, non-adjustable evaporation chamber, or servo-controlled adjustable system up to 95 % RH, depending on the model available |
| Inlet air filter | Retains 99 % of particles > 0.5 µm |
| Canopy | Double-wall, radio-transparent; inclined front with access door and 2 port holes; 2 rear port holes; at least 4 apertures for cables and tubing; silent door and port-hole operation |
| Canopy dimensions | At least 45 W × 80 L × 43 H cm |
| Mattress | Fixed mattress tray, tilting ± 12 degrees |
| Alarms | Audio-visual: skin/air temperature, sensors, fan, heater, system functionality |
| Monitoring | Automatic self-test and continuous system monitoring; control panel and display of settings and measured values |
| Noise inside the incubator | < 55 dB |
| Chassis | Mould- and corrosion-resistant frame; mobile base with 4 anti-static swivel castors (2 with brakes); side/corner bumpers; side handles |
| Accessories and storage | Side rails, IV pole, instrument shelf; cabinet with 2 drawers integrated in the base |
| Power requirements | 110–220 V / 50–60 Hz |
| Power consumption | 600–750 W |
| Product code | SLE/RAE/08 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is a Neonatal Incubator Used For?
A neonatal incubator gives a premature or unwell newborn an enclosed, temperature-controlled space. In skin mode a probe on the baby drives the heater towards the chosen skin temperature; in air mode the unit holds the canopy air at the set value. Set and measured values appear on the control panel, and audio-visual alarms flag temperature, sensor, fan, heater or system faults so staff can respond quickly.
Carers reach the baby through the inclined front door and four port holes, while the cable apertures let monitoring leads and infusion lines pass into the canopy without opening it. The tilting mattress tray helps with positioning, and the radio-transparent canopy lets X-ray images be taken through it. The frame is designed for frequent dismantling and cleaning; use of the incubator should follow the neonatal unit's own care and cleaning protocols.
What to Specify When Ordering
- Humidification type: passive evaporation chamber or servo-controlled adjustable humidity (up to 95 % RH), as this depends on the model available.
- Mains supply at the installation site, within 110–220 V / 50–60 Hz.
- Number of incubators required for each nursery or ward.
- Any accessories you want itemised on the quotation beyond the side rails, IV pole and instrument shelf.
Supplier
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana. The company supplies neonatal care equipment such as this automatic incubator to hospitals, maternity centres and health programmes, and prepares quotations that set out the model, humidification option and accessories. Learn more about the company on our profile page.
Related Resuscitation & Operating Theatre Equipment
Neonatal units equipping an incubator bay often add:
- Resuscitation Table Newborn With Accessories — for stabilising a baby at birth before transfer to the incubator.
- Newborn Warmer System Basic — a portable water-mattress warming option for babies who do not need an incubator.
- Portable Patient Monitor With Accessories — vital-signs monitoring with neonatal ranges, whose leads can pass through the canopy apertures.
- Infusion Pump With Accessories — a pole-mountable volumetric pump for IV fluids.
- Baby Cot Hospital Bassinet On Castors — a mobile cot for babies moving out of incubator care.
Browse the full Resuscitation & Operating Theatre Equipment range.
Frequently Asked Questions
Which control modes does the Neonatal incubator Automatic With Accessories offer?
The Neonatal incubator Automatic With Accessories offers servo-controlled air temperature (25–37 °C, override to 39 °C), servo-controlled skin temperature (34–36 °C, override to 38 °C) and a manual mode. Both servo settings adjust in 0.1 °C increments.
How does the Neonatal incubator Automatic With Accessories humidify the air?
The Neonatal incubator Automatic With Accessories has an integrated water chamber. Depending on the model available, it is either a passive, non-adjustable evaporation chamber or a servo-controlled adjustable system reaching up to 95 % relative humidity, so state your preference when you enquire.
What accessories come with the Neonatal incubator Automatic With Accessories?
The Neonatal incubator Automatic With Accessories is specified with side rails, an IV pole and an instrument shelf, plus a two-drawer cabinet in the base, side handles, corner bumpers and four anti-static swivel castors, two of them with brakes.
What power supply does the Neonatal incubator Automatic With Accessories need?
The Neonatal incubator Automatic With Accessories runs on 110–220 V at 50–60 Hz and draws 600–750 W, figures to check against the ward's electrical supply. From a 22 °C room it reaches 37 °C in under 30 minutes.
Is a calibration certificate available for the Neonatal incubator Automatic With Accessories?
Calibration documentation for the Neonatal incubator Automatic With Accessories depends on the model supplied, so please discuss your requirement with us through the contact page before ordering and we will confirm what can accompany the unit.
Who supplies the Neonatal incubator Automatic With Accessories?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Neonatal incubator Automatic With Accessories to hospitals, maternity units and health programmes in India and international markets, including bulk orders for new neonatal wards.
Request a Quote
To receive a quotation for the Neonatal incubator Automatic With Accessories, tell us the quantity, preferred humidification option and delivery location via the contact page, or add the incubator to the enquiry cart.
Last updated: 24 September 2026
