- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Resuscitation Table Newborn With Accessories
Resuscitation Table Newborn With Accessories (Product Code: SLE/RAE/13) is a mobile neonatal resuscitation table with an overhead radiant warmer, used to keep a newborn warm while it is stabilised and resuscitated in delivery rooms, operating theatres and neonatal units. It carries two 10 l oxygen cylinders, an IV pole and examination lights, and its heater runs in manual or skin-temperature servo mode. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Mobile neonatal resuscitation table with warmer and accessories |
| Table surface | At least 60 W × 76 L cm |
| Mattress | Covers the entire table surface, 5 cm thick; cover flame-retardant, waterproof and cleanable with hospital-grade disinfection products |
| Side panels | Transparent acrylic resin, collapsible/foldable for full access |
| Heating system | Overhead radiant heater at fixed height; parabolic quartz/ceramic elements; reflector and safety grid; uniform heat distribution; integrated cradle heating |
| Modes | Pre-warming; manual; servo-controlled by skin temperature; instant switch between manual and servo |
| Skin temperature setting (servo) | 34–38 °C in 0.1 °C increments |
| Skin temperature sensor accuracy | ± 0.3 °C |
| Manual and pre-heating settings | 10–80 % in 10 % steps |
| Display | Panel in the vertical column showing mode, heating power (%), pre-set temperature, actual skin temperature and cradle air temperature |
| Alarms | Audio-visual: skin temperature, heating system and sensor failure |
| Lighting | 2 halogen spot examination lights integrated in the radiant heater |
| Accessories | Integrated support for 2 × 10 l oxygen cylinders; side rail and IV pole; lower storage drawer; side handle |
| Mobility | 4 anti-static swivel castors, 2 with brakes |
| Power | 220 V / 50 Hz; consumption 1,100 W |
| Product code | SLE/RAE/13 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is a Newborn Resuscitation Table Used For?
Newborns lose heat quickly, so the first minutes of care after birth are given under a radiant warmer. Staff switch on pre-warming before the delivery, lay the baby on the heated mattress and work from all sides once the acrylic side panels are folded down. The overhead lights illuminate the baby for assessment, while suction, oxygen and IV lines are kept within reach on the rail and pole.
In manual mode the heater runs at a chosen output from 10 to 80 %; in servo mode a skin probe regulates it towards the set skin temperature, and the display shows actual skin and cradle air temperatures. Carrying its own oxygen cylinders, the table can follow the baby from delivery room to theatre or nursery. Resuscitation should be carried out by trained staff following the facility's newborn care protocols.
What to Specify When Ordering
- Number of tables, typically one per delivery room or theatre.
- Whether you also need the two 10 l oxygen cylinders and a flowmeter, as the table provides the support only.
- Confirmation that a 220 V / 50 Hz supply able to carry 1,100 W is available at the point of use.
Supplier
ScienceLab is how Jain Scientific Equipments Private Limited of Ambala, Haryana, trades. The company supplies newborn resuscitation tables with radiant warmers to maternity hospitals, district hospitals and newborn care programmes, and quotes them together with related delivery-room items when asked. Our profile page has more about the company.
Related Resuscitation & Operating Theatre Equipment
To complete a newborn corner around this table, buyers often add:
- Suction Pump Foot Operated Single Piston — airway suction that does not depend on mains power.
- Oxygen Flow Meter 0 – 15 LPM — to regulate oxygen from the table-mounted cylinders.
- Neonatal incubator Automatic With Accessories — for continued care after the baby is stabilised.
- Labour Delivery Bed With Accessories — the delivery bed the table is usually placed beside.
- Portable Patient Monitor With Accessories — monitoring with neonatal ranges.
Find more in Resuscitation & Operating Theatre Equipment.
Frequently Asked Questions
How does the Resuscitation Table Newborn With Accessories keep the baby warm?
The Resuscitation Table Newborn With Accessories uses an overhead radiant heater with parabolic quartz/ceramic elements, a reflector and safety grid, plus integrated cradle heating. It offers pre-warming, manual output of 10–80 % and servo control by skin temperature.
What skin temperature can be set on the Resuscitation Table Newborn With Accessories?
In servo mode the Resuscitation Table Newborn With Accessories can be set from 34 to 38 °C in 0.1 °C increments, and its skin temperature sensor has an accuracy of ±0.3 °C. Alarms warn of skin temperature, heater or sensor problems.
How large is the mattress on the Resuscitation Table Newborn With Accessories?
The Resuscitation Table Newborn With Accessories has a table surface of at least 60 × 76 cm, covered by a 5 cm mattress with a flame-retardant, waterproof cover that can be cleaned with hospital-grade disinfection products.
Are oxygen cylinders included with the Resuscitation Table Newborn With Accessories?
The Resuscitation Table Newborn With Accessories has an integrated support for two 10 l oxygen cylinders, but the specification describes the holder rather than the cylinders. Tell us if you want cylinders or a flowmeter included in the quotation.
What power does the Resuscitation Table Newborn With Accessories need?
The Resuscitation Table Newborn With Accessories runs on 220 V / 50 Hz and consumes 1,100 W, so it should be connected to a socket rated for that load in the delivery room or theatre.
Who supplies the Resuscitation Table Newborn With Accessories?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Resuscitation Table Newborn With Accessories to maternity units, hospitals and newborn care programmes in India and international markets, including multi-unit orders for several delivery rooms.
Request a Quote
Send the number of tables and your delivery address through the contact page to receive a quotation for the Resuscitation Table Newborn With Accessories, or add it to the enquiry cart.
Last updated: 24 September 2026
