Water Bath (6 Holes) Manufacturer,Supplier and Exporter in India

Water Bath (6 Holes) (Product Code: SLE/CE/109) is a double-walled, thermostatically controlled water bath used to hold flasks, bottles and small containers at a set temperature up to 100 °C in civil engineering, chemistry and materials testing laboratories. Its six openings with 75 mm concentric-ring lids let several samples be conditioned side by side over a stainless steel inner tank. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 6-Hole Water Bath Used For?

Many civil engineering and materials tests require a sample, bottle or solution to reach a known temperature before a reading is taken. A multi-hole water bath does this gently and evenly: specific gravity bottles can be brought to test temperature, and bitumen or other samples conditioned before physical tests. The concentric rings let each opening be reduced to suit smaller vessels, and unused openings stay covered to limit heat loss and evaporation.

Fill the tank with water before switching on, set the rotary thermostat and watch the LED display while the bath settles; a separate thermometer in the water confirms the actual temperature. Distilled water helps reduce scale on the stainless steel tank, which should be drained and wiped dry after use. When planning a water bath for a lab in India or abroad, the six-hole size sits between the 4-hole and 12-hole versions, trading capacity against bench space.

What to Specify When Ordering

• Number of holes: 6 for this listing, or ask about the 4-hole and 12-hole versions.
• The working temperature your tests need, within the listed +5 to 100 °C range.
• Your mains supply, since the bath is listed for 220 V, 50 Hz.
• Quantity and delivery location in India or abroad.

OEM Manufacturer

The Water Bath (6 Holes) is manufactured by Jain Scientific Equipments Private Limited, which trades as ScienceLab and is the OEM (original equipment manufacturer) for this model. The double-walled bath is made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India.

Schools, colleges, testing laboratories, dealers and importers in India and international markets buy it factory-direct. Replacement concentric rings or additional baths for an existing lab can be requested from the manufacturer itself — ask us. The ScienceLab company profile has more about the company.

Related Civil Engineering Lab Equipment

These items are often used with, or instead of, a multi-hole water bath:

• Specific Gravity Bottles — brought to test temperature in the bath before weighing.
• Digital Thermometer — an independent check of the water temperature.
• Kinematic Viscometer Bath — a dedicated bath for viscosity testing of bitumen and oils.
• Circulating water bath with cooler unit — the choice when tests need temperatures below room temperature.

See the full Civil Engineering Lab Equipment range, or compare other models in the Water Bath category.

Frequently Asked Questions

How many holes does the Water Bath (6 Holes) have?
The Water Bath (6 Holes) has six openings, each closed by concentric rings of 75 mm diameter that can be removed to fit different vessels. Four-hole and twelve-hole versions are also listed, so ask us if another size suits your lab better.

What temperature range does the Water Bath (6 Holes) cover?
The Water Bath (6 Holes) is listed for +5 to 100 °C, set with a thermostatic rotary knob and shown on an LED display. For a heating-only bath the lower figure is normally read as 5 °C above room temperature, so confirm low set points with us.

What is the Water Bath (6 Holes) made of?
The Water Bath (6 Holes) has double-walled construction with a stainless steel inner tank that holds the water and an outer body of powder coated GI sheet, a combination suited to daily use on laboratory benches.

What power supply does the Water Bath (6 Holes) need?
The Water Bath (6 Holes) is listed for a 220 V, 50 Hz power supply. If your laboratory or export destination uses different mains, mention it in your enquiry so the manufacturer can advise before you order.

Who manufactures the Water Bath (6 Holes)?
The Water Bath (6 Holes) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is supplied factory-direct to schools, colleges, laboratories, dealers and importers.

Is a calibration certificate available for the Water Bath (6 Holes)?
Calibration-certificate availability for the Water Bath (6 Holes) should be discussed with us before ordering. Explain your documentation needs through the contact page and we will confirm what can accompany your quotation.

Request a Quote

Ask for a quotation for the Water Bath (6 Holes) through our contact page, or add it to the enquiry cart together with bottles or thermometers. Quotes come direct from the manufacturer.

Last updated: 24 September 2026