Circulating water bath with cooler unit Manufacturer,Supplier and Exporter in India

Circulating water bath with cooler unit (Product Code: SLE/CE/55) is a 40 litre heated and cooled water bath used to hold test specimens at a steady temperature for cement and asphalt testing. Its two-channel electronic thermoregulator controls both heating and cooling across +5 to +60 °C, while a re-circulating unit keeps the temperature uniform through the tank. This digital water bath is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Circulating Water Bath with Cooler Used For?

Cement mortar prisms of 40 × 40 × 160 mm are cured under water at a controlled temperature, and hydrated samples may need to be stored at 20 °C — often below the room temperature of a laboratory, which is why this bath has a cooler as well as a heater. For asphalt work, specimens are conditioned in water at temperatures from 25 to 60 °C before testing, so one multi-purpose bath can serve both the cement and bitumen sections of a lab.

Fill the tank with clean water and let the thermoregulator settle at the set point before loading specimens. Leave space between specimens so the re-circulating flow can reach all faces, and drain and wipe the stainless steel tank periodically to keep it clean. The unit’s 830 × 480 × 950 mm footprint and about 62 kg weight should be planned into the lab layout.

What to Specify When Ordering

• Intended use: cement specimen curing, storage of hydrated samples at 20 °C, or asphalt conditioning
• Space and handling for the 830 × 480 × 950 mm, approx. 62 kg unit
• The mains supply at your site for a 2000 W unit, so the quotation can address it

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies this circulating water bath with cooler unit to cement, concrete and bitumen testing laboratories as a laboratory instruments supplier in India, alongside the moulds and compaction apparatus that prepare the specimens it holds.

For vendor registration, the supplying company is GST-registered in Haryana (GSTIN 06AAECJ8618A1ZT) and holds Legal Entity Identifier 3358004HRD1JIVXKYX49. Company details are on the ScienceLab company profile.

Related Civil Engineering Lab Equipment

These related items prepare or store the specimens that go into the water bath:

• Prism Mould Three Gang — casts the cement prisms that are cured in water
• Jolting Apparatus — compacts mortar in the 40 × 40 × 160 mm three-compartment mould
• Cement curing bench-type cabinet — humid storage before specimens go into water
• Accelerated Curing Tank — a curing tank for concrete and cement cube moulds

See the Civil Engineering Lab Equipment category for more cement, concrete and bitumen testing apparatus.

Frequently Asked Questions

What temperature range does the Circulating water bath with cooler unit cover?
The Circulating water bath with cooler unit (SLE/CE/55) covers +5 to +60 °C with a listed accuracy of ±1%. Its two-channel electronic thermoregulator handles both heating and cooling and automatically maintains the set temperature.

What is the capacity and size of the circulating water bath?
The Circulating water bath with cooler unit holds 40 litres. Inside dimensions are 550 × 360 × 200 mm, outside dimensions are 830 × 480 × 950 mm, and the unit weighs approximately 62 kg, so plan floor or bench space accordingly.

Can the Circulating water bath with cooler unit be used for curing cement prisms?
Yes. The Circulating water bath with cooler unit is listed for curing 40 × 40 × 160 mm cement specimens in water and for storing hydrated samples at 20 °C. It also serves asphalt testing, where conditioning temperatures of 25 to 60 °C are required.

What is the Circulating water bath with cooler unit made of?
The internal surfaces of the Circulating water bath with cooler unit are polished stainless steel, and the outer case is insulated sheet steel. The insulation helps the bath hold its set temperature, and the smooth stainless steel tank is easy to drain and clean.

Who supplies the Circulating water bath with cooler unit?
The Circulating water bath with cooler unit is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to laboratories in India and international markets. Enquiries and quotations are handled through the contact page.

What power does the Circulating water bath with cooler unit need?
The Circulating water bath with cooler unit is rated at 2000 W. Please state your mains voltage and frequency when you enquire, so the supply arrangement can be confirmed in the quotation before the unit is dispatched.

Request a Quote

Send your enquiry for the Circulating water bath with cooler unit through the contact page, or add it to the enquiry cart with any related curing equipment.

Last updated: 24 September 2026