- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Balfour Abdominal Retractor 3 Blades
Balfour Abdominal Retractor 3 Blades (Product Code: SLE/SI/38) is a self-retaining suprapubic abdominal retractor used to hold back skin, fatty tissue, muscles or viscera after the incision so that the operative field stays exposed. Surgical teams use its two fenestrated end blades, solid centre blade and locking compass frame, which opens the wound to a maximum of approximately 180 mm. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, whose range of scientific & laboratory instruments also covers other retractors and abdominal instruments.
Specifications
| Parameter | Detail |
|---|---|
| Type | Suprapubic abdominal retractor, self-retaining (self-holding) |
| Blades | 3: two fenestrated end blades and one solid centre blade |
| End blades | Fenestrated, approx. 35 x 70 mm |
| Centre blade | Solid, approx. 45 x 80 mm |
| Frame | Compass (support with hinged arms) with locking mechanism |
| Maximum wound opening | Approx. 180 mm |
| Material | Martensitic steel (quenched, magnetic) |
| Composition | 0.50% carbon; 13% chromium; 0.60–0.90% molybdenum |
| Intended use | Retracting skin, fatty tissue, muscles or viscera after the incision to expose the operative field |
| Product code | SLE/SI/38 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is a Balfour Retractor Used For?
In abdominal surgery the wound edges must be held apart for long periods. The Balfour's two fenestrated end blades are placed against the wound edges and spread on the compass frame, which locks at the chosen width up to about 180 mm; the solid centre blade then adds retraction on the third side of the wound.
Because it holds itself open, one self-retaining retractor can take the place of hand-held retractors and frees assistants for other tasks. Theatre buyers abroad can order it through ScienceLab as a laboratory equipment exporter from India, together with hand-held retractors for the superficial layers. Clean the hinged arms and locking mechanism thoroughly, and check that the lock holds before use.
What to Specify When Ordering
- Number of retractors required
- Whether the blade sizes (end blades approx. 35 x 70 mm, centre blade approx. 45 x 80 mm) suit your procedures
- Whether a maximum wound opening of approx. 180 mm is sufficient
- Companion hand-held retractors or abdominal instruments for the same set
Supplier
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, an Ambala, Haryana company that sources and supplies self-retaining retractors such as the Balfour for operating theatres, surgical teaching departments, dealers and importers in India and international markets.
Further details are on our company profile.
Related Surgical Instruments
Instruments that complement the Balfour retractor in abdominal procedures:
- Collin Abdominal Retractor 3 Blades — another three-blade abdominal retractor pattern
- Farabeuf Retractor Double Ended Pair — hand-held retractors for superficial layers
- Abdominal Spatula Malleable — a malleable spatula for holding back viscera
- Doyen Intestinal Clamp Forceps Curved — for bowel work within the exposed field
- Surgical Instruments, Abdominal SET — a set of instruments for abdominal surgery
All retractors, clamps and forceps are grouped in Surgical Instruments.
Frequently Asked Questions
How wide can the Balfour Abdominal Retractor 3 Blades open?
The Balfour Abdominal Retractor 3 Blades gives a maximum wound opening of approximately 180 mm. The compass frame with hinged arms carries the blades, and a locking mechanism holds the chosen opening without an assistant.
What blade sizes does the Balfour Abdominal Retractor 3 Blades have?
The Balfour Abdominal Retractor 3 Blades has two fenestrated end blades of approximately 35 x 70 mm and a solid centre blade of approximately 45 x 80 mm. Together they retract the wound on three sides.
What is the Balfour Abdominal Retractor 3 Blades used for?
The Balfour Abdominal Retractor 3 Blades is used to retract skin, fatty tissue, muscles or viscera after the incision to expose the operative field. As a self-retaining suprapubic retractor, it keeps the wound open throughout the procedure.
What steel is the Balfour Abdominal Retractor 3 Blades made from?
The Balfour Abdominal Retractor 3 Blades is made from martensitic steel (quenched, magnetic) containing 0.50% carbon, 13% chromium and 0.60 to 0.90% molybdenum. Ask us if your tender requires further material documentation.
Who supplies the Balfour Abdominal Retractor 3 Blades?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Balfour Abdominal Retractor 3 Blades. The company supplies this self-retaining retractor to operating theatres, surgical teaching departments, dealers and importers in India and international markets.
What should I include in a Balfour Abdominal Retractor 3 Blades enquiry?
A Balfour Abdominal Retractor 3 Blades enquiry should state the quantity, any companion retractors or abdominal instruments, the delivery destination in India or abroad, and any documents your procurement process needs. Send it via our contact page or the enquiry cart.
Request a Quote
Request a quotation for the Balfour Abdominal Retractor 3 Blades from our contact page, or add it to the enquiry cart with the rest of your abdominal set.
Last updated: 24 September 2026
