- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
MIG Welding Machine
MIG Welding Machine (Product Code: SLE/MCE/12) is a three-phase, wire-fed gas metal arc welding set used to lay continuous welds on steel fabrications in production workshops, maintenance shops and welding training centres. It is listed with step-type voltage control, a 50–600 A welding current range and a burn back facility, and it takes filler wire of 0.8–1.6 mm diameter. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Phase | 3 |
| Supply voltage | 380–440 V |
| Open circuit voltage | 18–58 V |
| Welding current range | 50–600 A |
| Welding current at 60% duty cycle | 250 A – 600 A |
| Voltage control | Step type |
| Permissible wire diameter | 0.8–1.6 mm |
| Insulation | Class H |
| Winding | 100% copper |
| Burn back facility | Yes |
| Construction | Rugged, robust design intended for minimum maintenance and low running cost |
| Product code | SLE/MCE/12 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the MIG Welder Used For?
In MIG (metal inert gas) welding, a solid wire is fed continuously through the torch and melts into the joint while a shielding gas protects the pool from the air. Because the welder does not stop to change electrodes, the process is quick and clean for long seams on sheet, plate, frames, tanks and machine bases, and it is widely taught in fabrication and welder courses.
On this set the operator chooses a voltage step on the switch and balances it against wire feed to get a steady arc. The burn back facility lets the wire burn back slightly after the trigger is released so it does not freeze into the finished weld. Class H insulation and all-copper windings suit a busy workshop; keep the torch liner clean, use the right contact tip for the wire size and wear full welding protection.
What to Specify When Ordering
- Required welding current rating within the 250 A – 600 A (60% duty cycle) range.
- Wire diameter you plan to run, from 0.8 to 1.6 mm.
- Your three-phase supply voltage, within 380–440 V.
- Whether a torch, gas regulator and cables should be quoted with the set (ask us what is included).
Supplier
The MIG Welding Machine is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab brand, to engineering colleges, ITIs, fabrication and maintenance workshops, dealers and importers in India and international markets. For vendor registration, the supplying company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49.
More about the company is on the ScienceLab profile.
Related Workshop Machine Tools
Buyers equipping a MIG welding bay often add these items:
- Arc Welding Machine — stick welding for site jobs and cellulose-electrode work away from the gas supply.
- Gloves, Welding — protective gloves for welders and trainees.
- Spot welding Machines — joins overlapping sheet panels where a full seam is not needed.
- Radial Drill Machine — drills heavy welded plates and bases after fabrication.
Explore the complete Workshop Machine Tools range.
Frequently Asked Questions
What welding current does the MIG Welding Machine provide?
The MIG Welding Machine covers a welding current range of 50–600 A, and its welding current at 60% duty cycle is listed from 250 A to 600 A, so state the rating you need when you request a quotation.
Which wire sizes can the MIG Welding Machine use?
The MIG Welding Machine accepts filler wire from 0.8 mm to 1.6 mm diameter. Thinner wire suits sheet and light sections, while thicker wire suits heavier plate and higher currents; use the matching contact tip for each size.
How is voltage adjusted on the MIG Welding Machine?
The MIG Welding Machine uses step-type voltage control with an open circuit voltage of 18–58 V. The welder selects a step and sets the wire feed to match, which gives repeatable settings that trainees can note and reuse.
What power supply does the MIG welder need?
The MIG Welding Machine needs a three-phase supply of 380–440 V. Make sure the workshop outlet and cabling suit the current you plan to weld at, and ask us to confirm the input rating for the model you choose.
Who supplies the MIG Welding Machine?
The MIG Welding Machine is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to institutes, workshops, dealers and importers in India and international markets. Use the contact page for enquiries.
Can the MIG Welding Machine be supplied in bulk for training centres?
Yes, the MIG Welding Machine can be quoted in multiple units for training centres, colleges and dealers. Share the number of welding stations, supply voltage and delivery location so we can prepare a combined quotation and shipping plan.
Request a Quote
Ask for a MIG Welding Machine quotation through the contact page, or place it in the enquiry cart together with other workshop items.
Last updated: 24 September 2026
