Hot Plate General Purpose (Product Code: SLE/LHP/01) is a compact electric heater for everyday warming, boiling and evaporation work on the bench. An 800W element enclosed under a round 20 cm top surface heats flat-bottomed vessels, and an energy regulator lets the user choose how hard it works. School and college chemistry labs, biology prep rooms and quality-control benches use it wherever an open flame is not wanted. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, for customers looking for a simple hot plate lab India teachers and technicians can run without training.

Specifications

Typical Use

This model suits routine tasks: warming water or buffer solutions, dissolving solids for crystallisation, concentrating a solution by evaporation, or keeping a staining reagent warm during a practical. An energy regulator works by switching the element on and off in cycles, so a low setting gives gentle warming and a high setting drives the surface towards its 350 °C maximum. For repeatable results, let the plate settle for a few minutes after changing the setting and check the liquid with a thermometer rather than relying on the dial position.

As general chemistry lab equipment school India practicals depend on, it is safest with flat-bottomed borosilicate beakers or conical flasks that sit fully on the plate. Keep flammable solvents away from the hot surface, place the unit on a heat-resistant bench away from paper and cables, and use tongs to lift hot vessels.

Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a manufacturer of laboratory heating and teaching equipment located in Ambala, Haryana. The company profile explains who we are and what we make.

Related Laboratory Equipment

These items are often ordered with a general purpose hot plate for the same heating practicals:

• Glass Beaker — flat-bottomed vessels for warming and boiling on the plate.
• Crucible & Beaker Tongs — for lifting hot beakers and crucibles off the surface safely.
• Laboratory Thermometer — to read the actual liquid temperature while heating.
• Laboratory Round Hot Plate — a cast iron round plate with a three position switch as an alternative.
• Hotplate & Magnetic Stirrer — when solutions need stirring while they are heated.

Compare every model in our Hot Plates category.

Frequently Asked Questions

How hot does this hot plate get?
The maximum surface temperature can reach up to 350 °C. The liquid inside a vessel will stay lower than the plate surface, so measure it directly when the temperature matters.

What size vessels can I use?
The top surface is 20 cm (8") in diameter. Choose flat-bottomed beakers or flasks whose base sits within the plate for even heating.

How is the temperature set?
By an energy regulator knob, which controls the proportion of time the 800W element is powered. It does not display a numeric temperature, so pair it with a thermometer for recorded work.

What supply voltage does it need?
Please confirm the supply voltage and plug type for your country through our contact page so the unit is prepared for your mains supply.

How should I clean the top surface?
Switch off, unplug and let the plate cool completely, then wipe with a damp cloth. Remove spilled crystals or residue promptly so they do not bake onto the surface at the next use.

Is a calibration certificate available?
Please discuss calibration documentation with us before ordering; we will tell you what can be provided for this model.

Can schools order in bulk?
Yes. For class sets or institutional purchases in India and international markets, send the quantity and delivery address and we will prepare a quotation with warranty terms.

Request a Quote

Ask for pricing on the Hot Plate General Purpose through our contact page, or place it in the enquiry cart with the glassware and accessories you need.

Last updated: 24 September 2026

Laboratory Rectangular Hot Plate (Product Code: SLE/LHP/02) is a heavy duty bench heater with a large rectangular cast iron plate, built so that several beakers, flasks or evaporating dishes can be heated side by side. Its body is made from mild steel sheet and heat is selected with a three heat rotary switch, keeping operation straightforward for students and lab assistants. College practical labs, pharmacy and food-testing rooms and industrial QC benches choose it when one small plate is not enough, and it is a dependable item of chemistry lab equipment India buyers can order in three plate sizes. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

A rectangular plate is at its most useful in group practicals and batch preparation: a demonstrator can warm a row of beakers for a class titration session, dry glassware, digest samples before analysis or evaporate several solutions at once. The three heat switch gives three fixed heat levels, so the lowest step can hold solutions warm while the highest brings water to the boil faster. Because cast iron spreads heat across its mass, it rewards patience — switch on a little before the class starts so the whole plate reaches a steady temperature.

For those planning lab equipment for college India departments, the choice of size mainly depends on how many vessels need to be heated together and how much bench space is free. Keep the plate dry between uses to protect the cast iron surface, avoid placing cold wet glassware on a hot plate, and leave clearance around the mild steel body for air to circulate.

Manufacturer

Jain Scientific Equipments Private Limited, known to customers as ScienceLab, manufactures this hot plate in Ambala, Haryana. The company is a registered MSME under Udyam number UDYAM-HR-01-0003714 and ships export orders under Importer-Exporter Code AAECJ8618A issued by the DGFT. More background is on our company profile.

Related Laboratory Equipment

Labs setting up a heating station around this plate often add:

• Laboratory Digital Rectangular Hot Plate — the same plate sizes with PID control and an external probe.
• Pyrex Beaker, Low Form — wide, flat-bottomed beakers that sit well on a large plate.
• Beaker Tong — for moving hot beakers between the plate and the bench.
• Black Rubberized Laboratory Aprons — protective wear for staff handling hot solutions.
• Electric Water Bath Rectangular — for gentler, indirect heating of samples that should not touch a hot surface.

Browse all models in our Hot Plates category.

Frequently Asked Questions

Which plate sizes are available?
Three: 30 x 25 cm (12 x 10"), 40 x 25 cm (16 x 10") and 45 x 30 cm (18 x 12"). Please state the size you need when you enquire.

Which power rating comes with which size?
Ratings of 1.2 kW and 1.6 kW are offered. Confirm the rating for your chosen size with us through the contact page, especially if your socket or circuit has a load limit.

How many heat settings are there?
The three heat rotary switch provides three heat levels. There is no numeric temperature readout, so use a thermometer in the liquid when you need a specific temperature.

What electrical supply is needed?
The heating elements are designed to work on 220V AC. Tell us if your site uses a different supply before ordering.

How do I look after the cast iron plate?
Let it cool fully, brush off residue and wipe with a slightly damp cloth, then dry it. Avoid leaving water standing on the surface.

What should an institutional enquiry include?
List the plate size, quantity, delivery address, billing name and any GST or tender format you need. Warranty terms are stated in our quotation.

Request a Quote

Send your size and quantity for the Laboratory Rectangular Hot Plate through our contact page, or add it to the enquiry cart; we supply customers across India and international markets.

Last updated: 24 September 2026

Laboratory Round Hot Plate (Product Code: SLE/LHP/03) pairs a 20 cm cast iron heating plate with a steel body and a three position rotary switch, giving students a sturdy, easy-to-read heat source for a single vessel. It reaches a maximum surface temperature of approximately 300 °C and runs on 220 V AC/50 Hz mains. Teachers ordering school chemistry lab equipment in India use it for one-beaker experiments at each workstation, and technicians keep one on the prep bench for reagent work. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

One plate per student group is a common arrangement for heating curves, solubility tests, boiling-point observations and preparing hot water baths in a beaker. With three switch positions there is little room for confusion: students start on the low position for warming, move up when they need boiling, and return to low to hold a temperature. Cast iron stores heat, so the plate stays hot for some time after switching off — tell students to treat it as hot until a teacher has checked it.

For schools building up educational lab equipment India classrooms can share, a round plate of this size fits most common beakers and conical flasks while leaving space on the bench for notebooks and apparatus. Place it on a stable, heat-resistant surface, keep the supply cable away from the hot plate, and never heat a closed container.

Manufacturer

The plate is produced by Jain Scientific Equipments Private Limited in Ambala, Haryana; ScienceLab is the brand name under which the company sells its laboratory products. Visit our company profile to learn more about the business.

Related Laboratory Equipment

For a complete heating workstation, customers also look at:

• Hot Plate General Purpose — a round plate with energy regulator control for finer adjustment of heat.
• Laboratory Rectangular Hot Plate — a larger cast iron surface for heating several vessels together.
• Pyrex Beaker Set of 5 — heat-resistant beakers in a range of volumes for use on the plate.
• Beaker Tongs — so students can move hot glassware without touching it.
• Transparent Plastic Laboratory Apron — splash protection during heating practicals.

All models are listed in our Hot Plates category.

Frequently Asked Questions

What is the plate made of and how big is it?
It is a cast iron plate of 20 cm diameter mounted on a steel body. Vessels with a base smaller than the plate heat most evenly.

What is the maximum temperature?
The maximum surface temperature is approximately 300 °C. Liquids in a vessel will be cooler than the plate, so check them with a thermometer.

Can it be used on a different mains voltage?
This model is specified for 220 V AC/50 Hz. If your mains supply is different, contact us before ordering so we can advise you.

Is it suitable for younger students?
The three position switch is simple to use, but the cast iron surface gets very hot and cools slowly. Use it under teacher supervision with tongs and protective wear.

Can you provide a calibration certificate?
Calibration documentation should be discussed with us at the enquiry stage through the contact page.

Do you supply hot plates in class quantities?
Yes, we supply schools and colleges in India and international markets. Share the number of workstations, delivery address and billing details, and our quotation will include warranty terms.

Request a Quote

For pricing on the Laboratory Round Hot Plate, write to us via the contact page or add it to your enquiry cart.

Last updated: 24 September 2026

Laboratory Advanced Ceramic Hot Plate (Product Code: SLE/LHP/04) is a PID-controlled heater with a glass ceramic top plate that resists strong acids and bases, set on a die-cast aluminium body finished with an anti-corrosion coating. It is intended for labs where spills of corrosive reagents are likely and where the set temperature has to be reached quickly and held closely, with a maximum of 380°C from a 1 kW rating. Research groups, university chemistry departments and testing labs looking for analytical lab instruments India suppliers can build it into sample preparation work. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

Acid digestion before metal analysis, heating alkaline cleaning solutions, evaporating solvent extracts and warming reaction mixtures are all jobs where a metal plate would corrode or stain over time. The glass ceramic surface stands up to these reagents and wipes clean, while PID control adjusts power continuously so the plate approaches the set point without large overshoot — useful when a method specifies a temperature and the result depends on holding it.

This hot plate fits well into lab equipment for research India institutions run for method development and routine QC. Good practice: heat vessels whose bases are flat and clean, avoid sliding heavy glassware across the top, never pour cold liquid onto a hot ceramic surface, and keep the body dry so its anti-corrosion finish stays intact.

Manufacturer

Jain Scientific Equipments Private Limited operates from Ambala in Haryana and sells its instruments under the ScienceLab name to laboratories, colleges and research institutions. Details of the company are available on our company profile.

Related Laboratory Equipment

Items that complement a ceramic-top hot plate in the same workflow:

• Advanced Ceramic Hot Plate Magnetic Stirrer — choose this when samples must be stirred while heated.
• Glass-Ceramic Heating Plate — another glass-ceramic heating option to compare.
• Tall Form Beaker — taller walls reduce splashing during digestion and boiling.
• Thermometer, Infra Red, Hand Held — for a quick non-contact check of surface or vessel temperature.
• Laboratory Digital Rectangular Hot Plate — a larger PID-controlled cast iron plate for several vessels.

See all heaters in our Hot Plates category.

Frequently Asked Questions

Why choose a glass ceramic top over cast iron?
Glass ceramic offers chemical resistance against strong acids and bases and is easy to wipe clean, which makes it better suited to corrosive work. Cast iron plates are sturdier against knocks, so choose according to your reagents and handling.

What is the maximum temperature and power?
The maximum temperature is 380°C and the rating is 1 kW.

Which mains supplies are supported?
Input ratings of 110V AC / 60 Hz and 220V AC / 50 Hz are listed. Tell us which one you need when you enquire so the correct version is supplied.

What does PID control do for me?
It regulates the heating process so the set temperature is reached quickly and held with better accuracy than a simple on-off switch. For the display and set-point details of the current model, please ask us.

How should the ceramic top be cleaned?
Allow the plate to cool, then wipe with a soft cloth and mild detergent. Avoid abrasive pads and sharp scrapers, which can scratch the surface.

Is calibration documentation available?
Please discuss calibration certificate availability with us through the contact page before placing your order.

Do you export this hot plate?
Yes, we supply laboratories in India and international markets. Include the voltage, quantity and destination in your enquiry and our quotation will state warranty terms.

Request a Quote

Request a price for the Laboratory Advanced Ceramic Hot Plate through the contact page, or add it to the enquiry cart along with beakers and accessories.

Last updated: 24 September 2026

Laboratory Digital Rectangular Hot Plate (Product Code: SLE/LHP/05) combines a large rectangular cast iron plate with a PID controller that reads an external temperature probe, so it controls the temperature of the liquid being heated rather than just the plate. It comes with the probe, support rods and clamps, and its heavy duty element can bring the top surface up to 350°C. Chemistry, pharmacy and food science labs that need controlled batch heating in several vessels treat it as one of the core laboratory instruments India colleges and QC units keep on the bench. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

The external probe is what sets this plate apart. Clamp it on the support rod, dip its tip into the solution in one of the vessels, and the PID controller adjusts heating until that liquid sits at the set value. This is the arrangement to use for holding a reaction or extraction at a fixed temperature, warming media or buffers to a defined point, or running a dissolution or solubility practical where students record results at a stated temperature.

Departments comparing chemistry lab instruments supplier options often choose the size by the number of vessels: the smallest plate suits a single analyst, while the largest serves a group bench. Keep the probe tip fully immersed and away from the vessel wall, place it in a vessel that is representative of the batch, and wipe and dry the probe after use so residue does not affect later readings.

Manufacturer

ScienceLab products, this digital hot plate among them, are made by Jain Scientific Equipments Private Limited from its base in Ambala, Haryana. Our company profile gives an overview of the company and its range.

Related Laboratory Equipment

Useful additions and alternatives for controlled batch heating:

• Laboratory Rectangular Hot Plate — the same plate sizes with a simple three heat switch where probe control is not needed.
• Laboratory Advanced Ceramic Hot Plate — a glass ceramic top for work with strong acids and bases.
• Hotplate & Stirrer, Digital — when a single vessel needs stirring as well as heating.
• Digital Thermometer — an independent check of liquid temperature in the other vessels on the plate.
• Glass Beaker Set of 5 — assorted beakers for loading the plate with several samples.

Compare all options in our Hot Plates category.

Frequently Asked Questions

What is included with the hot plate?
The plate is supplied with an external temperature probe, support rods and clamps for holding the probe in position.

Does the controller regulate the plate or the liquid?
The PID controller provides precise temperature regulation of the external probe, so it controls the temperature wherever the probe is placed — normally in the liquid.

Which sizes and ratings can I order?
Sizes are 30 x 25 cm (12 x 10"), 40 x 25 cm (16 x 10") and 45 x 30 cm (18 x 12"), with ratings of 1.2 kW and 1.6 kW. Ask us which rating applies to the size you prefer.

Can I use it without the probe?
The controller is designed around the external probe for its regulation. Please check with us through the contact page how the unit behaves if you plan to heat without the probe connected.

How often should the probe reading be checked?
Compare it against a reference thermometer at the temperatures you use, for example at the start of each term or before critical work. Calibration certificate availability can be discussed with us.

What details do you need for a quotation?
Plate size, quantity, supply voltage at your site, delivery location and billing details. Warranty terms are given with the quotation, and we supply India and international markets.

Request a Quote

To price the Laboratory Digital Rectangular Hot Plate, contact us through the contact page or add it to your enquiry cart.

Last updated: 24 September 2026

Electric Water Bath (Product Code: SLE/WB/01) is a round, aluminium-bodied water bath with concentric rings, used to heat beakers, flasks and evaporating dishes gently over hot water in school and college laboratories. It has a 1 kW heater with automatic cut-out and a constant level device, and measures 145 x 200 mm (height x diameter). It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory equipment supplier serving schools, colleges and dealers.

Specifications

What Is the Electric Water Bath Used For?

A ring-top water bath is a common way to warm or evaporate liquids without an open flame. Remove rings until the opening matches the vessel, rest a beaker, conical flask or evaporating dish on top, and the hot water and steam heat it evenly — useful for evaporating solutions towards crystallisation, warming test tubes for food tests, or gently melting low-melting solids in school chemistry lab equipment sets.

The constant level device helps keep the water at a steady height during longer heating runs, and the automatic cut-out adds protection for the 1 kW heater, but the bath should still be checked during use. Connect it through the supplied plug and 3-core cable to a properly earthed socket, keep the cable clear of the hot body, and empty and dry the bath after use to limit scale.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies this Electric Water Bath from Ambala, Haryana, India, to schools, colleges, laboratories and dealers. Quotations, repeat orders for extra benches and questions about spare rings or heaters are handled by the same ScienceLab team — ask us.

For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (GSTIN 06AAECJ8618A1ZT, LEI 3358004HRD1JIVXKYX49). Read more on the ScienceLab profile.

Related Water Bath

Other baths and accessories often chosen with this unit:

• Electric Water Bath, Double Walled (SCL-515/07) — another Electric Water Bath listing: a stirred bath with contact-thermometer control from ambient to 100 °C.
• Electric Water Bath Rectangular — a rectangular alternative for racks of tubes.
• Water Bath — another water bath option in the same range.
• Immersion Thermometer — for checking the water temperature while heating.
• Porcelain Dish (China Dish) — a typical evaporating vessel used on ring-top baths.

See every model in the Water Bath category.

Frequently Asked Questions

What are the dimensions of the Electric Water Bath SLE/WB/01?
The Electric Water Bath SLE/WB/01 measures 145 x 200 mm (height x diameter). Concentric rings on top let you reduce the opening to suit smaller beakers, flasks or evaporating dishes, so one bath serves several vessel sizes.

What heater does the Electric Water Bath SLE/WB/01 use?
The Electric Water Bath SLE/WB/01 has a 1 kW heater fitted with an automatic cut-out. It is supplied with a connector plug and 1 metre of 3-core cable, and should be connected only to a properly earthed socket.

What does the constant level device do?
The constant level device on the Electric Water Bath SLE/WB/01 helps maintain a steady water level during longer heating runs, which keeps vessels on the rings evenly heated. Check the level before each session and top up with clean water.

Does the Electric Water Bath SLE/WB/01 have a thermostat?
The listing for the Electric Water Bath SLE/WB/01 mentions a 1 kW heater with automatic cut-out and a constant level device, but no adjustable thermostat. If you need a set temperature, see the stirred, double-walled Electric Water Bath in the Related section below, or ask us for advice.

Who supplies the Electric Water Bath SLE/WB/01?
The Electric Water Bath SLE/WB/01 is supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, from Ambala, Haryana, India. Quotations, repeat orders and enquiries about spare rings or heaters are handled directly by the ScienceLab team.

Can I order the Electric Water Bath SLE/WB/01 in bulk or for export?
Yes. The Electric Water Bath SLE/WB/01 is supplied in quantity to schools, colleges, dealers and importers across India and international markets. Share the number of units and your destination on the contact page to receive a quotation.

Request a Quote

Get a quotation for the Electric Water Bath (SLE/WB/01) through the contact page or by adding it to the enquiry cart — the ScienceLab team in Ambala will reply with a quotation.

Last updated: 24 September 2026

Water Bath (Product Code: SLE/WB/02) is a hemispherical copper bath used to heat beakers, flasks and dishes gently over boiling water in school and college chemistry laboratories. Teachers choose it where a simple, flame-heated bath is wanted: it is made of thick copper sheet, with a set of concentric rings on top and 2 handles for lifting. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to schools, colleges and dealers.

Key Details

What Is the Copper Water Bath Used For?

A copper water bath is the traditional way to warm or evaporate a liquid without putting the glass straight into a flame. The bath is partly filled with water and heated from below, usually on a tripod stand and wire gauze over a Bunsen burner. Rings are lifted off until the opening suits the vessel, which then sits in the steam and hot water — ideal for evaporating a solution towards crystallisation, drying a precipitate in a china dish or keeping test tubes warm during food tests.

Copper spreads heat quickly and evenly, and the hemispherical form sits steadily on a tripod. Keep water in the bath at all times while heating, because a copper bath heated dry can be damaged. Use the 2 handles with heat-resistant gloves or a cloth, and empty and dry the bath after each practical so it stays in good order for the next class. It remains a staple item of chemistry lab equipment for schools in India.

Supplier

This copper Water Bath is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, from Ambala, Haryana, India. Schools, colleges, dealers and importers order it directly from ScienceLab, and repeat orders or questions about replacement rings are handled by the same team — ask us.

About the company: ScienceLab profile.

Related Laboratory Equipment

What you typically need to set up this bath on the bench:

• Bunsen Burner — the usual heat source under a copper bath.
• Tripod Stand 200mm — supports the bath above the burner; check the fit with us.
• Gauze Wire — spreads the flame under the bath.
• Porcelain Dish (China Dish) — a common evaporating vessel for the rings.
• Electric Water Bath — an electrically heated alternative where flames are not wanted.

Compare every model in the Water Bath category.

Frequently Asked Questions

What is the Water Bath SLE/WB/02 made of?
The Water Bath SLE/WB/02 is made of thick copper sheet in a hemispherical shape. It has a set of concentric rings on top to suit different vessel sizes, and 2 handles for lifting it on and off the heat.

How is the copper Water Bath heated?
The listing for the Water Bath SLE/WB/02 describes a copper vessel with no built-in heater, so it is heated from below — typically on a tripod stand with wire gauze over a Bunsen burner. Always keep water in the bath while it is on the flame.

What are the concentric rings for?
The concentric rings on the Water Bath SLE/WB/02 are removed one by one until the opening matches the beaker, flask or evaporating dish. The vessel then rests securely over the hot water and steam and is heated evenly.

What size is the Water Bath SLE/WB/02?
The listing for the Water Bath SLE/WB/02 does not give its diameter or capacity. Please ask for the current dimensions through the contact page so you can check it against your tripod stands and burners before ordering.

Who supplies the Water Bath SLE/WB/02?
The copper Water Bath SLE/WB/02 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. Orders, repeat purchases and questions about replacement rings for the Water Bath SLE/WB/02 go directly to the ScienceLab team.

Can schools order the Water Bath in class sets or for export?
Yes, the copper Water Bath SLE/WB/02 is supplied in quantity to schools, colleges, dealers and importers across India and international markets. State the number of baths and the delivery destination on the contact page for a quotation.

Request a Quote

Ask for a quotation for the Water Bath (SLE/WB/02) through the contact page or add it to the enquiry cart together with burners and stands. The quote comes directly from the ScienceLab team in Ambala.

Last updated: 24 September 2026

Electric Water Bath Rectangular (Product Code: SLE/WB/03) is an electrically heated, multi-hole water bath used to warm or evaporate the contents of several vessels at once in school, college and teaching laboratories. Its single-wall stainless steel chamber has 75 mm holes with concentric rings, heated by a 1 kW heater with a cut-out device. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory instruments supplier in India.

Specifications

What Is the Rectangular Electric Water Bath Used For?

When a whole practical group needs to heat samples at the same time, a multi-hole rectangular bath saves bench space and avoids a row of burners. Each 75 mm hole takes a beaker, flask or dish, and the concentric rings reduce the opening for smaller vessels, so several students can evaporate solutions, warm reagents in test tubes or keep samples hot side by side on one water bath in the lab.

The stainless steel chamber resists rusting from constant contact with hot water, and the tubules for the water level arrangement help keep the water topped up during a long session. Fill the bath before switching on, connect it through the supplied plug and 3-core cable to an earthed socket, and keep an eye on the level — the cut-out device protects the 1 kW heater but is not a substitute for supervision. Drain and wipe the chamber at the end of the day.

What to Specify When Ordering

• The number of baths for your laboratory benches.
• How many 75 mm holes you need — the listing does not state the hole count, so confirm the current layout with us.
• The plug type and mains supply used in your country, especially for export orders.
• Accessories such as thermometers or evaporating dishes to be quoted with the bath.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the Electric Water Bath Rectangular from Ambala, Haryana, India, to schools, colleges, teaching laboratories and dealers. The same ScienceLab team answers questions about rings, heaters and repeat orders for extra benches — ask us.

Read the ScienceLab profile for company details.

Related Laboratory Equipment

Useful additions and alternatives for heating work:

• Immersion Thermometer — checks the water temperature, as this bath has no thermostat listed.
• Porcelain Dish (China Dish) — an evaporating dish that sits on the rings.
• Electric Water Bath — a round, single-opening version for one vessel at a time.
• Serological Water Bath — a thermostatically controlled bath when a set temperature is needed.

See all models in the Water Bath category.

Frequently Asked Questions

What is the chamber of the Electric Water Bath Rectangular made of?
The Electric Water Bath Rectangular SLE/WB/03 has a single-wall chamber made of stainless steel. The top has 75 mm holes fitted with concentric rings, so vessels of different sizes can be placed over the hot water.

What heater does the Electric Water Bath Rectangular use?
The Electric Water Bath Rectangular uses a 1 kW heater with a cut-out device. It comes complete with a connector plug and 1 metre of 3-core cable, and should always be connected to a properly earthed socket.

How many holes does the rectangular water bath have?
The listing for the Electric Water Bath Rectangular SLE/WB/03 gives the hole size as 75 mm but not the number of holes. Ask us through the contact page and we will confirm the layout of the current model.

Can the temperature be set on the Electric Water Bath Rectangular?
No thermostat is mentioned for the Electric Water Bath Rectangular; its listing describes a 1 kW heater with a cut-out device. For work at a set temperature, consider the Serological Water Bath, or ask us for advice.

Who supplies the Electric Water Bath Rectangular?
The Electric Water Bath Rectangular SLE/WB/03 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. Quotations, repeat orders and questions about rings or the heater for this bath are handled directly by the ScienceLab team.

Do you supply the Electric Water Bath Rectangular in bulk or for export?
Yes, the Electric Water Bath Rectangular is supplied in quantity to schools, colleges, dealers and importers across India and international markets. Share the quantity, plug type and destination through the contact page for a quotation.

Request a Quote

Request a quotation for the Electric Water Bath Rectangular (SLE/WB/03) on the contact page or add it to the enquiry cart. Quotes are sent directly by the ScienceLab team in Ambala.

Last updated: 24 September 2026