Tensile Strength Tester (Electrically Operated) Manufacturer,Supplier and Exporter in India

Tensile Strength Tester (Electrically Operated) (Product Code: SLE/CE/47) is a double-lever testing machine used to measure the tensile strength of cement mortar briquettes in cement and building-materials laboratories. Engineering colleges and testing labs use it for its 900 kg capacity and a micro-switch that stops the machine the instant the briquette fails. It is produced by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Cement Briquette Tensile Strength Tester Used For?

The tester measures direct tensile strength on mortar briquettes cast in the brass briquette mould. After the briquette is clamped in the jaws and the machine is switched on, the sliding weight moves steadily along the top lever, and the double lever multiplies its effect so that tension on the specimen rises smoothly until it breaks. The lever arrangement therefore lets a moving weight build up loads to the full 900 kg capacity.

In cement technology practicals, students cast briquettes, cure them for different periods and compare the failure loads to see how strength develops with age. As engineering lab equipment in India for diploma and degree courses, it is simple to operate: reset the sliding weight to zero with its marker before each test, keep the jaws free of mortar crumbs so the briquette sits centrally, and read the load as soon as the micro-switch stops the machine.

What to Specify When Ordering

• Number of testers required for the laboratory
• Number of additional brass briquette moulds and base plates for casting several specimens per mix
• Confirmation that a 230 V, 50 Hz single-phase AC supply is available at the bench

OEM Manufacturer

The Tensile Strength Tester is built by Jain Scientific Equipments Private Limited, which trades as ScienceLab and is the original equipment manufacturer of this machine. It is manufactured and assembled at the company’s licensed factory at Saha, Ambala, Haryana, and dispatched factory-direct to colleges, polytechnics, dealers and importers.

The company is incorporated under CIN U29309HR2020PTC087597, and its production premises at 449, HSIIDC Industrial Area, Saha, Ambala hold Factory Licence AMB-ONLINE-CHD-J-414. Company details are on the ScienceLab profile page.

Related Civil Engineering Lab Equipment

Laboratories setting up briquette tensile testing usually add these items from the same range:

• Vicat Needle Apparatus With Dashpot — for finding cement paste consistency when working out mixing water
• Cement curing bench-type cabinet — keeps briquettes in humid, temperature-controlled conditions before testing
• Circulating water bath with cooler unit — for water curing of cement specimens at a controlled temperature
• Cement samplers — for taking a representative sample from bulk cement stock

See the complete Civil Engineering Lab Equipment category for other cement, concrete and soil testing machines.

Frequently Asked Questions

What is the capacity of the Tensile Strength Tester (Electrically Operated)?
The Tensile Strength Tester (Electrically Operated) has a capacity of 900 kg, applied through a friction-free double lever system by a sliding weight on the top lever. The tensile load at the moment of briquette failure is read accurately to 0.5 kg.

What comes with the Tensile Strength Tester?
The Tensile Strength Tester (SLE/CE/47) is supplied complete with one brass briquette mould and one base plate. Laboratories that cast several briquettes from each mix usually order additional moulds, so state the number you need when requesting a quotation.

How does the Tensile Strength Tester stop when the briquette breaks?
A micro-switch on the Tensile Strength Tester (Electrically Operated) stops the machine instantly when the briquette fails, so the operator can take the load reading before returning the sliding weight to its zero position using the marker provided.

What electrical supply does the Tensile Strength Tester require?
The Tensile Strength Tester (Electrically Operated) operates on 230 V, 50 Hz (50 cycles), single-phase AC. For sites with a different voltage or frequency, mention the local supply in your enquiry so it can be addressed in the quotation.

Who manufactures the Tensile Strength Tester (Electrically Operated)?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Tensile Strength Tester (Electrically Operated), producing it at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and spare-part enquiries are handled directly by the manufacturer.

Can I get a calibration certificate with the Tensile Strength Tester?
Calibration-certificate availability for the Tensile Strength Tester (Electrically Operated) should be discussed with us before you order. Tell us what verification your laboratory or tender requires through the contact page and we will confirm what can be provided.

Request a Quote

To request a quotation for the Tensile Strength Tester (Electrically Operated), use the contact page or place it in the enquiry cart with your quantity and any extra briquette moulds. Your quotation comes straight from the manufacturer.

Last updated: 24 September 2026