- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Foot For Rods
Foot For Rods (Product Code: SLE/LR/04) is a round tempered cast iron foot, 80 mm in diameter, used to stand a 12 mm support rod upright for light clamping and demonstration set-ups in school, college and research laboratories. Its compact circular footprint takes very little bench space, which makes it handy for single-clamp jobs and crowded benches. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | Tempered cast iron |
| Foot diameter (D) | 80 mm |
| Rod diameter (D) | 12 mm |
| Product code | SLE/LR/04 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Foot for Rods Used For?
Not every job needs a large rectangular stand base. When a single clamp has to hold a test tube, a thermometer or a small funnel, a 12 mm rod standing in this 80 mm foot does the work while leaving the rest of the bench free. The small round footprint also fits on trays and in tight corners of a fume cupboard where a full-size base would be in the way.
Because the footprint is compact, keep loads light, low and centred over the foot; for tall or top-heavy apparatus, move up to a larger stand base. It also suits physics lab equipment set-ups in Indian schools, where a rod standing in a small foot can carry light demonstration pieces. Tempering is a heat treatment that reduces the brittleness of cast iron; keep the foot dry and wipe off spills so its surface stays clean.
What to Specify When Ordering
- The number of feet required.
- Whether you need rods to go with them; the foot takes 12 mm rods, and we will confirm matching rods in the quotation.
- Whether you prefer this tempered cast iron version or the stainless steel 18/10 foot listed separately.
- The delivery location.
OEM Manufacturer
Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of the Foot For Rods and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buying small fittings like this deal with the maker directly for pricing and repeat supply.
If you need help matching feet, rods and clamps for a new lab, ask us. More about the company is on the ScienceLab profile.
Related Stand bases, Rods and Rings
Other supports and fittings used with a rod foot:
- Foot For Rods, Stainless Steel 18/10 — the stainless steel version for wet or frequently cleaned benches.
- Rods For Stand Bases — support rods for building the stand.
- Sockets For Rods Without Thread — sockets for mounting rods without a threaded fitting.
- Table Clamp For Rods — fixes a rod to the edge of a table instead of standing it on a foot.
- Bosshead Malleable Cast Iron Chromium Plated — attaches a clamp to the rod.
View the whole Stand bases, Rods and Rings category.
Frequently Asked Questions
What rod size fits the Foot For Rods?
The Foot For Rods is designed for rods with a diameter (D) of 12 mm. Check that your support rods are 12 mm before ordering; if unsure, mention the rods you already use in your enquiry and we will confirm compatibility.
How big is the Foot For Rods?
The Foot For Rods has a diameter (D) of 80 mm, giving a compact round footprint that takes little bench space. It suits light, low set-ups; for tall or heavy apparatus, a larger stand base is the safer choice.
What is the Foot For Rods made of?
The Foot For Rods is made of tempered cast iron. Tempering is a heat treatment that reduces the brittleness of cast iron. Keep the foot dry and wipe off any chemical spills promptly so the metal surface stays in good condition.
Is there a stainless steel version of the Foot For Rods?
Yes. Besides this tempered cast iron Foot For Rods, the range includes the Foot For Rods, Stainless Steel 18/10 as a separate item, which suits wet or frequently cleaned benches. Ask us to quote both if you want to compare.
Who manufactures the Foot For Rods?
The Foot For Rods is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Pricing, repeat orders and fitting advice come straight from the manufacturer.
Can the Foot For Rods be ordered in bulk?
Yes. The Foot For Rods can be ordered in quantity for school and college labs, dealers and importers in India and international markets. Give the number of feet, any rods needed and the delivery location to receive a quotation.
Request a Quote
Ask for a Foot For Rods quotation through our contact page or add it to the enquiry cart with any rods and clamps you need. Quotations come direct from the manufacturer.
Last updated: 24 September 2026
Base Frame tube, 18/10 Stainless Steel
Base Frame tube, 18/10 Stainless Steel (Product Code: SLE/LR/05) is a tubular 18/10 stainless steel base frame used as the foot of larger laboratory support frames that carry rods, bossheads and clamps across wide apparatus. It is offered as a V-form frame with 2 legs or as an H-form frame with a variable bridge, and its external dimensions A, B and C can be defined individually. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | 18/10 stainless steel, tube |
| Version 1 | Base frame tube V: 2 legs in V form |
| Version 2 | Base frame tube H: legs in H form, bridge variable |
| Dimension A | Leg length |
| Dimensions | External dimensions A, B and C can be defined individually |
| Product code | SLE/LR/05 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Stainless Steel Base Frame Tube Used For?
Some apparatus is simply too wide or too tall for one rod on a plate base: a long distillation train, a column with several take-off points, or a row of vessels that must be clamped side by side. For these, labs build a frame, and the base frame tube is its foot. The V form spreads 2 legs apart to resist tipping in more than one direction, while the H form joins its legs with a bridge whose length can vary, giving a broad, steady base for frames that span a bench or fume cupboard.
Because the external dimensions A, B and C are defined individually, the frame can be sized to the space it must occupy. Measure the width, depth and clear height of the bench or fume cupboard, and the footprint of the apparatus, before you specify. Fitted with rods, bossheads made for frames and clamps, it forms the lab stand, clamp and boss head system that teaching and research labs in India use for their larger set-ups.
What to Specify When Ordering
- The form: V (2 legs in V form) or H (legs in H form with a variable bridge).
- The external dimensions A (leg length), B and C that you need.
- The bench or fume-cupboard space the frame has to fit.
- Rods, bossheads for frames and clamps to be quoted with it.
OEM Manufacturer
Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597) trades as ScienceLab and is the OEM (original equipment manufacturer) of these base frames. They are produced at the company's licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala, Haryana (Factory Licence AMB-ONLINE-CHD-J-414).
Because A, B and C are set for each order, you agree the dimensions directly with the manufacturer rather than through a reseller, and repeat frames can be requested to the same sizes. Research institutes, colleges, dealers and importers can read more on the ScienceLab profile.
Related Stand bases, Rods and Rings
Fittings and frames that work with a stainless base frame tube:
- Bosshead For Frames, 18/10 Stainless Steel — a bosshead intended for frames, in the same grade of steel.
- H-Frame Complete — a complete H-frame for comparison with a frame built to your sizes.
- H-Frame MINI — a smaller H-frame for compact set-ups.
- Rods For Stand Bases — support rods for the uprights of the frame.
- Stand bases 18/10 Stainless Steel — single-rod stainless bases for smaller jobs.
Explore the Stand bases, Rods and Rings category for all bases, frames and rings.
Frequently Asked Questions
What forms does the Base Frame tube, 18/10 Stainless Steel come in?
The Base Frame tube, 18/10 Stainless Steel comes in two forms: a V version with 2 legs arranged in a V, and an H version with legs in H form joined by a variable bridge. Both are made from 18/10 stainless steel tube.
Can the dimensions of the Base Frame tube, 18/10 Stainless Steel be specified?
Yes. The external dimensions A, B and C of the Base Frame tube, 18/10 Stainless Steel can be defined individually, with A being the leg length. Send the sizes you need, or the space the frame must fit, and we will confirm them in the quotation.
Why is the Base Frame tube made of 18/10 stainless steel?
The Base Frame tube, 18/10 Stainless Steel uses a grade of about 18% chromium and 10% nickel because frames often stay in place inside fume cupboards and wet areas, where untreated steel would rust. Stainless tube can also be wiped down after spills.
Which fittings are used with the Base Frame tube, 18/10 Stainless Steel?
Frames built on the Base Frame tube, 18/10 Stainless Steel are completed with rods, bossheads designed for frames and clamps. Tell us what the frame must hold, and we will suggest compatible fittings from the Stand bases, Rods and Rings range in the quotation.
Who manufactures the Base Frame tube, 18/10 Stainless Steel?
The Base Frame tube, 18/10 Stainless Steel is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Dimensions, quotations and repeat orders are agreed directly with the manufacturer.
What information is needed to quote the Base Frame tube, 18/10 Stainless Steel?
To quote the Base Frame tube, 18/10 Stainless Steel we need the form (V or H), the A, B and C dimensions or the space available, the quantity and the delivery location. A sketch or photo of your set-up helps us confirm the sizes.
Request a Quote
Send the form and dimensions you need through our contact page, or add the Base Frame tube to the enquiry cart. The quotation comes directly from the manufacturer.
Last updated: 24 September 2026
H-Frame MINI
H-Frame MINI (Product Code: SLE/LR/06) is a compact cast iron H-shaped frame base used to hold support rods upright for small retort stands and clamp set-ups in school, college and research laboratories. Teachers and technicians pick it for light bench work because it weighs only 1.2 kg and accepts rods of 8 mm and 12 mm diameter (rod not included). It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, alongside its wider range of chemistry lab equipment for India.
Specifications
| Parameter | Detail |
|---|---|
| Type | H-shaped frame base, MINI size |
| Material | Cast iron |
| Length (A, as listed) | 210 |
| Width (B, as listed) | 200 |
| Weight | 1.2 kg |
| Rod diameters accepted | 8 mm and 12 mm |
| Rod | Not included |
| Product code | SLE/LR/06 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the H-Frame MINI Used For?
An H outline spreads the frame's weight along two side bars, so a rod standing in it resists tipping sideways better than a rod in a small round foot, while the gap between the bars leaves room for a spirit lamp, beaker or small apparatus close to the rod. Typical jobs include holding a test tube, thermometer or small flask with a bosshead and clamp, hanging a light pendulum, or supporting a funnel over a receiver during filtration.
Because the MINI is light, it is meant for small loads: keep glassware low on the rod and centred over the frame, and use the 12 mm rod size when you want a stiffer column. For tall assemblies or heavy flasks, a larger and heavier frame is the safer choice. Paired with bossheads and clamps, it forms a simple retort stand for student benches in India; wipe the cast iron dry after practicals.
What to Specify When Ordering
- The rod diameter you will use with it: 8 mm or 12 mm.
- Whether you also need rods, since the H-Frame MINI is sold without one.
- The number of frames per lab or per student group.
- Whether the heavier H-Frame Complete would suit taller set-ups better.
OEM Manufacturer
Jain Scientific Equipments Private Limited trades under the name ScienceLab and is the OEM (original equipment manufacturer) of the H-Frame MINI, which it makes at its own licensed factory at Saha, Ambala, Haryana, India. Because the frame comes from the maker rather than a trading house, schools, colleges, dealers and importers receive quotations straight from the manufacturer.
Ask us about matching rods, spare fittings or repeat orders for the same frame. Company background is on the ScienceLab company profile.
Related Stand Bases, Rods and Rings
Items that complete or replace the H-Frame MINI in a stand set-up:
- Rods For Stand Bases — unthreaded 18/10 stainless rods, needed because the MINI ships without a rod.
- H-Frame Complete — the larger cast iron frame that comes with bossheads and aluminium rods.
- Stand With Base Plate H-Shape — a heavier H-shape base with a long stainless rod for tall set-ups.
- Table Clamp For Rods — fixes a rod to the bench edge when bench space is short.
See every base, rod and ring in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What rod sizes fit the H-Frame MINI?
The H-Frame MINI accepts support rods of 8 mm and 12 mm diameter. Choose 8 mm for light fittings and 12 mm when you want a stiffer column, and tell us which diameter you plan to use so the quotation can list matching rods.
Does the H-Frame MINI come with a rod?
No. The H-Frame MINI is sold as the cast iron frame base only, and the rod is not included. Rods can be added to the same order from the Rods For Stand Bases listing or quoted separately on request.
How heavy and how large is the H-Frame MINI?
The H-Frame MINI weighs 1.2 kg, and its listed dimensions are A (length) 210 and B (width) 200. The low weight makes it easy to move between benches, but it suits light, low loads rather than tall assemblies.
Who manufactures the H-Frame MINI?
The H-Frame MINI is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Buyers deal directly with the maker for quotations, spare parts and repeat orders.
Is the H-Frame MINI available for school bulk orders and export?
Yes. ScienceLab supplies the H-Frame MINI in quantity to schools, colleges and dealers in India and to buyers in international markets. Share the number of frames and rods needed and the delivery location through our contact page.
What information does a quotation for the H-Frame MINI need?
For an H-Frame MINI quotation, tell us the quantity, the rod diameter you will use (8 mm or 12 mm), whether rods should be included and the delivery address. With those details the manufacturer can price the order accurately.
Request a Quote
To order the H-Frame MINI, send your requirement through the contact page or add it to the enquiry cart. Quotes come direct from the manufacturer in Ambala.
Last updated: 24 September 2026
Sockets For Rods Without Thread
Sockets For Rods Without Thread (Product Code: SLE/LR/07) are socket fittings used to seat plain, unthreaded support rods so they stay firmly in place in laboratory stand and frame set-ups in schools, colleges and research labs. Lab technicians can order them in either of two materials, green-coated steel or 18/10 stainless steel, to suit the working conditions. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its lab equipment range from Ambala.
Key Details
| Parameter | Detail |
|---|---|
| Type | Socket for rods without thread (unthreaded rods) |
| Material option 1 | Steel, green coated |
| Material option 2 | 18/10 stainless steel |
| Product code | SLE/LR/07 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Sockets for Rods Without Thread Used For?
A plain rod has no thread to screw into a base, so it needs a socket to give it a fixed seat. With a socket in place, a technician can stand a support rod up for a practical, hang bossheads and clamps on it, and lift it out again afterwards so the bench is clear for the next class. This makes unthreaded rods quick to set up and swap between experiments.
Pick the green-coated steel version for general teaching rooms, where a coated finish is enough and the colour makes the fitting easy to spot. Choose 18/10 stainless steel, an alloy of about 18% chromium and 10% nickel, for wet areas, water-bath work or benches that are cleaned often, where a coating could wear. For a retort stand lab in India that mixes both, many buyers keep stainless sockets near sinks and coated ones elsewhere.
What to Specify When Ordering
- The material: green-coated steel or 18/10 stainless steel.
- The diameter of the rods you will use, so we can confirm the socket suits them.
- The number of sockets required.
- Whether matching unthreaded rods should be quoted with them.
OEM Manufacturer
These sockets are produced by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, acting as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Small fittings like this are bought factory-direct by schools, colleges, laboratory dealers and importers, with no trading middleman in between.
If you are replacing worn sockets or adding more to an existing set, ask us and the manufacturer will quote for the same pattern. Read more on the ScienceLab profile page.
Related Stand Bases, Rods and Rings
Rods and supports that are used together with rod sockets:
- Rods For Stand Bases — unthreaded 18/10 stainless rods in several lengths.
- Stand bases 18/10 Stainless Steel — a free-standing base when no fixed socket position is available.
- Foot For Rods, Stainless Steel 18/10 — a stainless foot with anti-slip rubber for a single rod.
- Table Clamp For Rods — holds a rod at the edge of a bench top.
Browse the full Stand Bases, Rods and Rings range.
Frequently Asked Questions
What materials are the Sockets For Rods Without Thread made in?
Sockets For Rods Without Thread are available in two materials: green-coated steel and 18/10 stainless steel. Both do the same job of seating an unthreaded rod; the choice depends on how wet or heavily cleaned the working area is.
Which rod diameter do these sockets take?
The rod diameter for the Sockets For Rods Without Thread is not stated in our listing. Tell us the diameter of the rods you use through the contact page, and the manufacturer will confirm a matching socket before you order.
Should I choose coated steel or stainless steel sockets?
Choose the 18/10 stainless steel Sockets For Rods Without Thread for wet areas, water baths or frequent cleaning. The green-coated steel version suits dry, general teaching benches and is easy to identify by its colour.
Who manufactures the Sockets For Rods Without Thread?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Sockets For Rods Without Thread as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, replacements and repeat orders are handled by the manufacturer itself.
Can the sockets be ordered together with rods?
Yes. Sockets For Rods Without Thread can be quoted together with unthreaded rods from our Rods For Stand Bases range. Tell us the rod length and diameter you want so both items appear on one quotation.
What does a quotation for these sockets need?
A quotation for Sockets For Rods Without Thread needs the material (green-coated steel or 18/10 stainless steel), the quantity, the rod diameter they must fit and the delivery location in India or abroad.
Request a Quote
Ask for a price on the contact page or place the item in the enquiry cart; your quotation comes directly from the manufacturer.
Last updated: 24 September 2026
Table Clamp For Rods
Table Clamp For Rods (Product Code: SLE/LR/08) is a tempered cast iron clamp used to fix a support rod directly to the edge of a laboratory bench or table instead of standing it in a base. It fits table tops up to a maximum thickness of 55 mm and is listed for rods of D/Ø 12/13, so it frees bench space in school, college and research labs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a space-saving piece of chemistry lab equipment for India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Table (bench-edge) clamp for support rods |
| Material | Tempered cast iron |
| Table top thickness | Up to 55 mm maximum |
| Rod size (D/Ø, as listed) | 12/13 |
| Product code | SLE/LR/08 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Table Clamp for Rods Used For?
Clamping a rod to the table borrows the weight of the whole bench, so a tall rod stays steady even when a base would start to tip. That suits long set-ups such as distillation columns, pendulums and demonstration apparatus that must hang well above the work surface. It also keeps the bench area under the rod completely free, which helps on narrow student benches where a stand base would take up room.
Before ordering, measure your table top: the clamp takes edges up to 55 mm thick. Place a thin pad between the jaws and a delicate or laminated surface, tighten firmly without forcing, and check the rod is vertical before loading glassware. Tempered cast iron is heat-treated to reduce the brittleness of ordinary cast iron, so it tolerates regular tightening in a busy chemistry lab.
What to Specify When Ordering
- The thickness of your bench or table top (the clamp takes up to 55 mm).
- The rod diameter you use; the clamp is listed for D/Ø 12/13.
- The number of clamps per lab.
- Whether matching rods should be quoted with them.
OEM Manufacturer
ScienceLab is the brand of Jain Scientific Equipments Private Limited, which makes the Table Clamp For Rods as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Institutions and dealers ordering bench fittings get them direct from the factory, not through a reseller.
For replacement clamps or to extend an existing lab, ask us for a quotation from the manufacturer. Company information is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Pieces that work with a table clamp in the same set-up:
- Rods For Stand Bases — unthreaded 18/10 stainless rods, listed in 12 and 13 D/Ø sizes.
- Universal Clamp — for gripping flasks and tubes once the rod is fixed.
- Stand Bases Steel Varnished — a free-standing base for tables whose edge cannot be clamped.
- Sockets For Rods Without Thread — another way to give an unthreaded rod a fixed seat.
More options are in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
How thick a table top will the Table Clamp For Rods fit?
The Table Clamp For Rods fits table and bench tops up to a maximum thickness of 55 mm. Measure the edge where you plan to fix it; thicker tops need a stand base or another mounting method instead.
Which rod size does the Table Clamp For Rods take?
The Table Clamp For Rods is listed for rods of D/Ø 12/13, the same sizes offered in our Rods For Stand Bases range. Tell us the rod you already use and the manufacturer will confirm the fit before you order.
What is the Table Clamp For Rods made of?
The Table Clamp For Rods is made of tempered cast iron. Tempering is a heat treatment that makes cast iron less brittle, which helps a clamp that is tightened and released many times during practical classes.
When is a table clamp better than a stand base?
A Table Clamp For Rods is the better choice for tall or top-heavy set-ups and for narrow benches, because the table carries the load and no floor area of the bench is used. For movable set-ups, a stand base is easier.
Who manufactures the Table Clamp For Rods?
The Table Clamp For Rods is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is sold factory-direct to institutions and dealers.
Can the Table Clamp For Rods be ordered in bulk or for export?
Yes. The Table Clamp For Rods is supplied in quantity to schools, colleges and dealers across India and international markets. Send the quantity, table thickness and rod size through the contact page for a quotation.
Request a Quote
Request pricing through our contact form or add the Table Clamp For Rods to the enquiry cart. The quote is prepared by the manufacturer itself.
Last updated: 24 September 2026
H-Frame Complete
H-Frame Complete (Product Code: SLE/LR/09) is a cast iron H-frame support set used to build a large, rigid framework for holding and hanging apparatus above the bench in physics, chemistry and engineering teaching labs. It comes with bossheads and 12 mm diameter aluminium rods, and its listed size is 500 × 250 × 800 (length × width × height) at 6.5 kg. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as lab equipment for colleges and schools in India.
Specifications
| Parameter | Detail |
|---|---|
| Type | H-frame support, complete set |
| Frame material | Cast iron |
| Rods | Aluminium, 12 mm diameter (included) |
| Bossheads | Included |
| Length (as listed) | 500 |
| Width (as listed) | 250 |
| Height (as listed) | 800 |
| Weight | 6.5 kg |
| Product code | SLE/LR/09 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the H-Frame Complete Used For?
Rods set into the cast iron frame and joined with the supplied bossheads create a framework with several fixing points, so one set-up can carry clamps, pulleys, springs or a pendulum at different heights. Physics teachers use such frames for mechanics work like Hooke's law, simple pendulum and pulley experiments, while chemistry and engineering labs use them to support long glass apparatus that a single rod cannot hold steadily.
The listed 800 height leaves room for long pendulum strings and tall assemblies, and the 6.5 kg cast iron base keeps the frame planted. Aluminium rods are light and do not rust, so the frame is easy to put up and take down between classes. Stand the frame on a level bench, tighten every bosshead before loading, and keep the heaviest pieces low.
What to Specify When Ordering
- The number of complete frames needed for your lab or classes.
- Whether you want extra bossheads or rods for more fixing points.
- Whether some benches would be better served by the smaller H-Frame MINI.
- The delivery location, in India or abroad.
OEM Manufacturer
Jain Scientific Equipments Private Limited, known to customers as ScienceLab, is the OEM (original equipment manufacturer) of the H-Frame Complete and produces it at its own licensed factory at Saha, Ambala, Haryana, India. The company is a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714), and its export consignments move under Importer-Exporter Code AAECJ8618A (DGFT).
Because the frame, rods and bossheads come from one maker, ask us when you need spare bossheads or replacement rods for this set. More about the company is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Items that extend or complement an H-frame set-up:
- Bosshead For Frames, 18/10 Stainless Steel — extra bossheads for adding fixing points to a frame.
- Rods For Stand Bases — additional unthreaded stainless rods, including 12 diameter sizes.
- H-Frame MINI — a compact 1.2 kg cast iron frame for lighter bench work.
- Stand With Base Plate H-Shape — a heavy single-rod stand when a full frame is not needed.
See all items in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What is included with the H-Frame Complete?
The H-Frame Complete includes the cast iron frame, bossheads and aluminium rods of 12 mm diameter, so it can be assembled without buying extra fittings. For the exact number of rods and bossheads in the set, ask us through the contact page.
What are the size and weight of the H-Frame Complete?
The H-Frame Complete is listed at length 500, width 250 and height 800, with a weight of 6.5 kg. The cast iron gives the frame a low, heavy footing that keeps tall set-ups steady on the bench.
Why does the H-Frame Complete use aluminium rods?
The H-Frame Complete uses 12 mm aluminium rods because aluminium is light and does not rust. That makes the frame easier to assemble, carry and store, while the heavy cast iron base provides the stability.
How is the H-Frame Complete different from the H-Frame MINI?
The H-Frame Complete is the larger 6.5 kg set that comes with bossheads and aluminium rods. The H-Frame MINI is a 1.2 kg frame base for 8 or 12 mm rods and is sold without a rod, for lighter work.
Who manufactures the H-Frame Complete?
The H-Frame Complete is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, spare bossheads and repeat orders come from the manufacturer directly.
Can the H-Frame Complete be ordered for export?
Yes. The H-Frame Complete is shipped to institutions and dealers in India and international markets. Give us the quantity, destination and any extra fittings you need, and the manufacturer will prepare an export quotation.
Request a Quote
Send your H-Frame Complete requirement via the contact page or the enquiry cart, and receive a quotation direct from the manufacturer.
Last updated: 24 September 2026
Burette Stand
Burette Stand (Product Code: SLE/LR/10) is a cast iron titration stand used to hold a burette upright above a flask during volumetric analysis in school, college and research chemistry labs. It includes two 105 mm diameter plates, one black and one white, and an 18/10 stainless steel rod of 600 × 10 mm on which a burette holder is fitted. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, making it a burette stand for Indian labs that comes straight from the maker.
Specifications
| Parameter | Detail |
|---|---|
| Type | Burette (titration) stand |
| Material | Cast iron |
| Plates (D/Ø) | 2 × 105 mm, one black and one white (included) |
| Rod | 18/10 stainless steel, 600 × 10 mm (included) |
| Use with | A burette holder (not listed among the included parts) |
| Product code | SLE/LR/10 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Burette Stand Used For?
In a titration, the burette is clamped to the rod and the conical flask sits on one of the plates directly under the tip. The white plate makes an indicator colour change easy to spot at the end point, which is why most acid-base titrations are run over white. The black plate gives contrast when the solution is pale, cloudy or forms a light precipitate, so students can switch backgrounds without moving the stand.
Check that the burette hangs vertically before filling it, and read the meniscus at eye level. The 18/10 stainless steel rod stands up to splashes of dilute acids and alkalis better than plain steel; rinse and dry the rod and plates after each session. One stand per titration station is the usual arrangement in chemistry lab equipment set-ups for India's school and college practicals.
What to Specify When Ordering
- The number of stands, usually one per titration station.
- Whether single or double burette holders should be quoted with the stands.
- Whether glass burettes and conical flasks are also needed.
OEM Manufacturer
This Burette Stand is produced by Jain Scientific Equipments Private Limited, which does business as ScienceLab, in the role of OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Chemistry departments, schools and dealers who equip titration benches buy it factory-direct instead of through a trader.
Lost a plate or need a replacement rod? Ask us and the manufacturer will advise. Company details are on the ScienceLab profile.
Related Stand Bases, Rods and Rings
What else a titration station needs:
- Burette Clamp, Die Cast – Single Clamp — a holder for one burette on a stand rod.
- Burette — the graduated glass tube that delivers the titrant.
- Conical Flask — the flask that stands on the plate to receive the titrant.
- Burette Stand, Hard Wood, Double — a hardwood stand for running two burettes side by side.
Other supports are listed under Stand Bases, Rods and Rings.
Frequently Asked Questions
What comes with the Burette Stand?
The Burette Stand comes with its cast iron base, two 105 mm diameter plates (one black, one white) and an 18/10 stainless steel rod measuring 600 × 10 mm. A burette holder is fitted to the rod and is not listed among the included parts.
Why does the Burette Stand have a black and a white plate?
The Burette Stand has two plates so the flask can sit on the background that best shows the end point. White suits most coloured indicator changes, and black shows up pale, cloudy or light-coloured precipitates more clearly.
Is a burette holder included with the Burette Stand?
A burette holder is not listed among the Burette Stand's included parts; the stand is designed for one to be fitted on its rod. We can quote a single or double burette clamp with the stand if you ask.
What is the rod of the Burette Stand made of?
The Burette Stand rod is 18/10 stainless steel, 600 mm long and 10 mm in diameter. Stainless steel resists rust and splashes from dilute titration reagents, which keeps the rod clean and smooth for adjusting the burette holder.
Who manufactures the Burette Stand?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Burette Stand as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Orders, replacement plates or rods and repeat supplies are handled by the manufacturer.
What should a Burette Stand enquiry include?
A Burette Stand enquiry should give the number of stands, whether burette holders, burettes or flasks are needed, and the delivery location in India or abroad. Send it through the contact page for a quotation.
Request a Quote
For pricing, contact us through the contact page or add the Burette Stand to the enquiry cart. Your quote is issued directly by the manufacturer.
Last updated: 24 September 2026
Foot For Rods, Stainless Steel 18/10
Foot For Rods, Stainless Steel 18/10 (Product Code: SLE/LR/11) is a stainless steel rod foot used to stand a single support rod upright on the bench in labs where corrosion resistance and easy cleaning matter. Its anti-slip rubber protection grips smooth work surfaces and helps spare the bench finish, which suits tiled, glass and epoxy tops in chemistry, biology and research labs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for teaching and research labs across India.
Key Details
| Parameter | Detail |
|---|---|
| Type | Foot for support rods |
| Material | 18/10 stainless steel |
| Base protection | Anti-slip rubber |
| Product code | SLE/LR/11 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Stainless Steel Foot for Rods Used For?
This foot is meant for benches that get wet or are cleaned often: beside sinks, around water baths, in microbiology rooms wiped down with disinfectant, or in any area where a painted or cast iron base would start to mark or rust. Stand a rod in it, add a bosshead and a clamp, and it will hold a thermometer, a small separating funnel or a test tube for the duration of a practical.
The rubber underside stops the foot from sliding when a clamp is tightened and prevents metal-on-surface scratches. Keep oils and strong solvents off the rubber, which can soften it, and never stand the foot on a hot plate. As with any single foot, keep loads light and centred; for heavy work choose a full stand base. It pairs well with other stainless laboratory instruments in India's teaching labs.
What to Specify When Ordering
- The number of feet required.
- The diameter of the rods you will use, so we can confirm the fit.
- Whether stainless rods should be quoted with the feet.
- Whether some positions could use the tempered cast iron Foot For Rods instead.
OEM Manufacturer
ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM (original equipment manufacturer) of this stainless rod foot and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Laboratories, schools and distributors order it straight from the factory, so pricing and supply are agreed with the maker.
If the rubber protection wears or you want more feet in the same finish, ask us. Background on the company is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Stainless fittings and alternatives for the same set-up:
- Rods For Stand Bases — 18/10 stainless rods to stand in the foot.
- Bossheads 18/10 Stainless Steel — stainless bossheads to fix clamps on the rod.
- Retort Clamp Standard 18/10 Stainless Steel — a stainless clamp for holding glassware.
- Foot For Rods — the tempered cast iron version for general benches.
The full range is in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What is the Foot For Rods, Stainless Steel 18/10 made of?
The Foot For Rods, Stainless Steel 18/10 is made of 18/10 stainless steel, an alloy with about 18% chromium and 10% nickel, and has anti-slip rubber protection underneath. The steel resists rust and the rubber keeps the foot from sliding.
What does the anti-slip rubber protection do?
The anti-slip rubber on the Foot For Rods, Stainless Steel 18/10 grips smooth bench tops so the foot stays put while clamps are tightened, and it keeps bare metal from scratching tiles, glass or epoxy surfaces.
Which rod diameter fits the stainless steel foot?
The rod diameter for the Foot For Rods, Stainless Steel 18/10 is not given in our listing. Tell us which rods you use through the contact page and the manufacturer will confirm a matching foot and rod.
Should I choose the stainless steel or the cast iron foot?
Choose the Foot For Rods, Stainless Steel 18/10 for wet, frequently cleaned or hygiene-sensitive benches. The tempered cast iron Foot For Rods is the simpler option for dry, general teaching benches.
Who manufactures the Foot For Rods, Stainless Steel 18/10?
The Foot For Rods, Stainless Steel 18/10 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is sold direct to institutions and dealers.
How should the stainless steel foot be cleaned?
Wipe the Foot For Rods, Stainless Steel 18/10 with water or a mild detergent and dry it after use. Keep oils and strong solvents away from the rubber protection, and do not place the foot on hot surfaces.
Request a Quote
Ask for a quotation through the contact page or put this foot in the enquiry cart. Prices come from the manufacturer directly.
Last updated: 24 September 2026
