- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Economy Burner Meker
Economy Burner Meker (Product Code: SLE/B/22) is a cost-conscious Meker-pattern gas burner used for routine heating on student benches in schools and colleges. A 25 mm perforated mesh plate sits on a nickel-plated burner tube with a tapered bottom, mounted on a cast base with a 10 mm OD riffled gas inlet. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and suits class-set buying of educational laboratory equipment.
Specifications
| Parameter | Detail |
|---|---|
| Type | Meker-type gas burner, economy model for routine use |
| Burner plate | Perforated mesh plate, 25 mm diameter |
| Burner tube | Nickel-plated, with tapered bottom |
| Base | Cast base, approx. 80 mm diameter |
| Gas inlet | Riffled inlet tube, 10 mm OD |
| Overall height | 175 mm (approx.) |
| Product code | SLE/B/22 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Economy Burner Meker Used For?
This is an everyday bench burner for the heating steps that fill most practical timetables: warming a beaker of water on a tripod and wire gauze, evaporating a solution to crystallisation in a basin, heating a solid in a boiling tube, or keeping a water bath simmering. The mesh plate spreads the flame over its 25 mm width, so glassware on a gauze heats more gently and evenly than over a narrow single-cone flame.
When planning a school laboratory setup in India, a common approach is to provide economy burners for the student benches and keep a few heavier-duty burners for ignition work. Before lighting, fit gas tubing that grips the 10 mm riffled inlet firmly, keep the mesh plate clear of spills, and let the burner cool on its base before it is returned to the store.
OEM Manufacturer
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of the Economy Burner Meker, which is made at the company's own licensed factory at Saha, Ambala, Haryana, India. Buying straight from the factory rather than through a trader suits schools, colleges and dealers equipping whole classes, and repeat orders for identical burners are handled by the same manufacturer. More about the business is on our company profile page.
Related Burners
Accessories and alternatives that complete a routine heating station:
- Meker Burner Heavy Base — a heavier die-cast-base Meker for sustained high-temperature work
- Bunsen Burner Tubing — gas tubing to link the inlet with the bench gas tap
- Butane Lighter — a long-reach way to light the burner safely
- Tripod, Stainless Steel — supports beakers and basins above the flame
- Gauze Wire — sits on the tripod to spread heat under glassware
Compare other gas burners, spirit lamps and lighters in our Burners range.
Frequently Asked Questions
What size tubing fits the Economy Burner Meker's gas inlet?
The Economy Burner Meker has a riffled gas inlet tube of 10 mm outside diameter, so choose gas tubing whose bore grips that size firmly. We can confirm a matching tube from our range when you place your order.
Is the air supply adjustable on the Economy Burner Meker?
An air regulator is not described in our product information for the Economy Burner Meker. If adjustable air matters for your practicals, contact us before ordering and we will confirm the air-control arrangement of the current model.
Is the Economy Burner Meker suitable for heating crucibles to constant mass?
The Economy Burner Meker is designed for routine use such as heating beakers, basins and boiling tubes. For long, high-temperature ignitions of crucibles, the Meker Burner Heavy Base is the better match in the same range.
How do I keep the mesh plate working well?
Keep the 25 mm mesh plate of the Economy Burner Meker clean: avoid letting solutions boil over onto the head, brush away deposits once the burner is cold, and store it upright so the plate is not bent or damaged.
What are the overall dimensions of the Economy Burner Meker?
The Economy Burner Meker is approximately 175 mm high overall, with a cast base about 80 mm in diameter and a 25 mm burner plate. This compact footprint suits crowded student benches where several burners are in use at once.
Who manufactures the Economy Burner Meker?
The Economy Burner Meker is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and produces it at its own factory in Saha, Ambala, Haryana, India. Schools and dealers receive quotations directly from the manufacturer, including for class sets.
Can we order the Economy Burner Meker as a class set?
Yes. The Economy Burner Meker can be supplied in class-set and bulk quantities to schools, colleges and distributors in India and international markets. Share the quantity, fuel gas and delivery location for a quotation.
Request a Quote
To receive the manufacturer's pricing for single units or class quantities, contact us or place the Economy Burner Meker in your enquiry cart.
Last updated: 24 September 2026
Flame Spreader
Flame Spreader (Product Code: SLE/B/23) is a burner-top attachment with an 18 mm top, used to turn a round burner flame into a flat, fishtail-shaped flame for glass working in chemistry and physics laboratories. It is intended for burners fitted with a flame stabilizer, and teachers and lab assistants use it when bending or shaping glass tubing for apparatus. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, alongside its chemistry lab equipment in India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Flame spreader (burner top attachment) |
| Top size | 18 mm |
| Flame produced | Flat fishtail flame |
| Intended for | Burners with a flame stabilizer |
| Application | Glass working, such as bending glass tubing |
| Product code | SLE/B/23 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Flame Spreader Used For?
A plain burner flame heats only a short length of glass tubing, which tends to make a bend kink or flatten. With the spreader in place, the wide fishtail flame warms several centimetres of tube at once, so the glass softens evenly and can be bent into a smooth right angle or U-shape. Teachers use it to prepare delivery tubes for gas collection apparatus, bent tubes for siphon and capillary demonstrations, and jets for wash bottles.
Hold the tube along the length of the flame and roll it steadily until it sags slightly, then take it out of the flame and bend it in one smooth movement. Place finished pieces on a heat-resistant mat to cool, and remember that the spreader itself stays hot for some time after the gas is turned off.
OEM Manufacturer
ScienceLab is the brand of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) that makes the Flame Spreader at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, institutions and dealers therefore buy this small accessory from its maker, and can ask the same team whether it suits burners they already own. For purchase departments that register vendors, the company's GSTIN is 06AAECJ8618A1ZT and its Legal Entity Identifier (LEI) is 3358004HRD1JIVXKYX49. Further background is on our company profile.
Related Laboratory Equipment
Burners and glass-working items used alongside the spreader:
- Bunsen Burner with Flame Stabilizer — the burner type this attachment is intended for
- Burner With Flame Stabilizer — another stabilized burner to consider for glass work
- Soda Glass Tubing 6mm — soft glass tubing that bends readily in a burner flame
- Glass Tubing Cutter — scores tubing to length before it is bent
- Gas Lighter, Piezo Electric — lights the burner once the spreader is fitted
More burners and flame accessories are listed in our Burners range.
Frequently Asked Questions
What does the Flame Spreader do?
The Flame Spreader reshapes a burner's round flame into a flat fishtail flame. This spreads the heat along a longer section of glass tubing, so the glass softens evenly and can be bent or shaped without kinking.
Will the Flame Spreader fit my existing burner?
The Flame Spreader has an 18 mm top and is intended for burners with a flame stabilizer. Because burner tubes vary, send us your burner details through our contact page and we will confirm the fit before you order.
Can I heat beakers or flasks with the Flame Spreader fitted?
The Flame Spreader is meant for glass working rather than general heating. For warming beakers or flasks, remove it and use the normal burner flame with a tripod and wire gauze, which spreads heat more safely under glassware.
Which glass tubing is easiest to work with the Flame Spreader?
Soft soda-glass tubing is the usual choice for bending with the Flame Spreader in a burner flame. Borosilicate tubing softens at a much higher temperature and may need a hotter flame, so ask us if you are unsure which tubing to order.
How should the Flame Spreader be handled after use?
Turn off the gas and allow the Flame Spreader to cool fully before lifting it off the burner, or use tongs if it must be removed while still warm. The attachment stays hot for some time after the flame is out.
Who manufactures the Flame Spreader?
The Flame Spreader is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Quotations and repeat orders are handled directly by the manufacturer, which can also advise on burner compatibility.
What details should we send for a Flame Spreader quotation?
For a Flame Spreader quotation, tell us the quantity, the burners you will use it with, and the delivery address in India or abroad. Bulk supply to schools, colleges and distributors is available on request.
Request a Quote
To order or ask the manufacturer for pricing, contact us or add the Flame Spreader to your enquiry cart.
Last updated: 24 September 2026
Burner Tube
Burner Tube (Product Code: SLE/B/24) is a 1 metre length of gas tubing used to carry fuel gas from the laboratory gas tap to a Bunsen burner in school, college and institute labs. Both ends are reinforced so they push onto the burner inlet and the tap nozzle and stay firmly in place. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as one of the everyday accessories in its school lab equipment range.
Key Details
| Parameter | Detail |
|---|---|
| Type | Gas supply tube for laboratory burners |
| Length | 1 metre |
| Ends | Reinforced, for fitting to a Bunsen burner and a gas tap |
| Purpose | Connecting a bench burner to the laboratory gas supply |
| Product code | SLE/B/24 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Burner Tube Used For?
Every gas burner on a practical bench needs a sound connection to its tap, and this tube provides it. The 1 metre length lets students place the Bunsen burner comfortably away from the tap and from their books, while the reinforced ends resist the splitting and stretching that happen when softer tubing is pushed on and pulled off nozzles day after day.
For a safe school lab setup, push each end fully onto its nozzle, route the tube so that it does not lie across a tripod, hot plate or flame, and turn the tap off at the bench, not just at the burner, when work ends. Check the tube for cracks, hardening or loose ends at the start of each term, and brush soapy water over the joints if you suspect a leak: bubbles show where the gas is escaping.
Supplier
Jain Scientific Equipments Private Limited, known to customers by its trading name ScienceLab, supplies the Burner Tube from Ambala, Haryana, India. Laboratories can order the tubing together with burners, lighters and other bench accessories in a single enquiry, for delivery to institutions and distributors in India and international markets. Details about the company are on our company profile.
Related Burners
Burners that this tube connects to, and an alternative tubing option:
- Bunsen Burners — general-purpose burners for the student bench
- Bunsen Burner with Stopcock — adds gas control at the burner itself
- Adjustable Bunsen Burner — a burner with adjustable flame for varied heating tasks
- Bunsen Burner Tubing — another gas tubing listing in the same range, for comparison
All burners, tubing and lighters are grouped in our Burners range.
Frequently Asked Questions
How long is the Burner Tube?
The Burner Tube is 1 metre long, enough to reach from a bench gas tap to a Bunsen burner placed at a safe working distance from the tap, books and other apparatus on the bench.
Why are the ends of the Burner Tube reinforced?
The reinforced ends of the Burner Tube are the parts that grip the burner inlet and the gas tap. They help the tube hold its fit and resist splitting after it is pushed on and pulled off nozzles repeatedly.
Can the Burner Tube be cut to a shorter length?
We advise against cutting the Burner Tube. Cutting removes a reinforced end, and a plain cut end will not grip a nozzle as securely, which could let gas escape at the joint during a practical.
Will the Burner Tube suit LPG and natural gas taps?
The bore size and gas rating of the Burner Tube are not listed in our current product information. Share your tap and burner details via our contact page and we will confirm suitability before you order.
When should the Burner Tube be replaced?
Replace the Burner Tube as soon as it shows cracks, becomes stiff, or no longer grips the nozzles tightly. Regular visual checks at the start of each term are more reliable than relying on a fixed replacement interval.
Who supplies the Burner Tube?
The Burner Tube is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, which offers it alongside its range of laboratory burners so that a complete gas connection can be ordered from one source.
Can we order Burner Tubes for a whole laboratory?
Yes. The Burner Tube can be supplied in bulk to schools, colleges and distributors in India and international markets. Include the quantity and delivery location in your enquiry so we can prepare a complete quotation.
Request a Quote
For pricing on single tubes or laboratory quantities, contact us or add the Burner Tube to your enquiry cart.
Last updated: 24 September 2026
Digital Heating Mantle With Stirrer
Digital Heating Mantle With Stirrer (Product Code: SLE/LHM/01) heats and stirs a flask at the same time, combining uniform mantle heating with a stirring motor in one two-tier unit. A PID microprocessor controller regulates temperature through an external probe, the stirring speed is varied smoothly up to 1200 rpm, and the heating element can reach 350 °C. Chemistry, pharmacy and research laboratories use it wherever a reaction mixture must be held at a set temperature while being stirred. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as lab equipment for research and teaching laboratories in India and international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Digital heating mantle with built-in stirring |
| Construction | Two-tier: heating element in the upper part, stirring motor in the lower part |
| Temperature control | PID microprocessor controller regulating via an external temperature probe |
| Heating element temperature | Up to 350 °C |
| Stirring speed | Step-less control, smooth variation up to 1200 rpm |
| Capacity options | 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml |
| Power rating options | 150 W, 200 W, 300 W, 450 W, 600 W |
| Supplied with | External temperature probe, support rods and clamps |
Typical Use
The flask sits in the upper heating tier while the motor below drives the stirring, so the contents are mixed and warmed evenly at once. Placing the external probe in the liquid, through a side neck or adapter, lets the PID controller hold the sample itself at the set temperature instead of simply heating the element, which matters for temperature-sensitive syntheses, dissolutions and extractions. Constant stirring also spreads heat through viscous mixtures and helps reduce bumping during reflux or distillation.
Choose the mantle size that matches your flask so the vessel sits snugly on the element, raise stirring speed gradually after the flask is clamped, and use the supplied support rods and clamps to hold the flask and any condenser securely. Let the mantle cool before removing the flask. For labs comparing chemistry lab equipment in India, this model suits users who want set-point control and stirring from a single bench footprint.
Manufacturer
The Digital Heating Mantle With Stirrer is manufactured by Jain Scientific Equipments Private Limited, known to customers by its ScienceLab brand and based in Ambala, Haryana. Details of our background are in the company profile.
Related Laboratory Equipment
Glassware and alternatives commonly used with a stirred mantle:
- Round Bottom Flask — flasks to match the mantle's capacity
- Liebig Condenser — for reflux or distillation above the heated flask
- Digital Heating Mantles — the same PID-controlled heating without the stirring motor
- Heating Mantle With Stirrer (Rota Mantle) — a stirred mantle with energy-regulator heat control
- Hotplate & Stirrer, Digital — for flat-bottomed beakers and flasks
Compare every model in the Heating Mantle category.
Frequently Asked Questions
What does the PID controller actually regulate?
It regulates temperature using the external probe, so with the probe in the liquid the controller works on the sample temperature.
How hot and how fast can it go?
The heating element can reach 350 °C, and stirring speed varies step-lessly up to 1200 rpm.
Which sizes are available?
Capacities of 250, 500, 1000, 2000, 3000 and 5000 ml, with power ratings from 150 W to 600 W. The rating for your chosen capacity is confirmed in the quotation.
What is included?
An external temperature probe, support rods and clamps come with the mantle.
Is a stirring bar supplied, and what mains supply is required?
Neither is stated in our listing. Please contact us so we can confirm the stirring accessory and electrical details for your order.
Can a calibration certificate be provided for the controller?
Please raise any calibration documentation requirement through our contact page; we will discuss what can be arranged.
Do you supply multiple units or export?
Yes, we supply laboratories and distributors in India and international markets. Share quantities, capacities and destination; warranty terms are confirmed in the quotation.
Request a Quote
Tell us the capacity you need via our contact page, or add this mantle to the enquiry cart for a quotation.
Last updated: 24 September 2026
Heating Mantle
Heating Mantle (Product Code: SLE/LHM/02) is a general-purpose mantle for heating flasks and other glassware evenly, without an open flame. The vessel rests directly on a flexible, insulated heating element anchored in glass fabric inside a rolled aluminium body, so it is warmed uniformly without substantially increasing the risk of the glass shattering. An energy regulator controls output up to 350 °C, and the mantle is offered in sizes from 50 ml to 5000 ml. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a laboratory equipment manufacturer in India supplying schools, colleges and industry here and in international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Heating mantle with energy-regulator control |
| Body | Rolled aluminium |
| Heating element | Flexible, insulated, anchored securely in glass fabric |
| Maximum temperature | Up to 350 °C |
| Control | Energy regulator |
| Capacity options | 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml |
| Power rating options | 60 W, 150 W, 200 W, 300 W, 450 W, 600 W |
| Suitable vessels | Glassware vessels such as flasks, placed directly on the heating element |
Typical Use
Heating mantles are the usual heat source for simple and fractional distillation, reflux and solvent removal, especially where flammable liquids make a naked flame unwelcome. The flask nests in the glass-fabric element, which wraps heat around its lower surface rather than concentrating it at one hot spot, so the contents warm steadily and the glass is spared the thermal shock a direct flame can cause. The energy regulator sets how much power reaches the element; start low, watch the liquid, and increase in steps until the boil or reflux rate is where you want it.
Pick the mantle size that matches your flask so the glass sits in full contact with the element, never switch it on empty, and support the flask and any condenser independently with a stand and clamps. Wipe up spills only after the unit has cooled, keeping liquids out of the glass fabric. With eight capacities to choose from, a single model can cover everything from micro-scale work to large batches, which helps labs standardise their distillation apparatus in India and abroad.
Manufacturer
This mantle is produced by Jain Scientific Equipments Private Limited, whose trading name is ScienceLab. The company works from Ambala in Haryana, India, and describes its operations in the company profile.
Related Laboratory Equipment
Items that complete a mantle-heated distillation or reflux set-up:
- Distillation Flask — a side-arm flask for simple distillation on the mantle
- Round Bottom Flask — standard flasks in sizes that nest in the element
- Retort Stand — independent support for the flask and condenser above the mantle
- Three Prong Swivel Clamp — grips the flask neck on the stand
- Digital Heating Mantles — a PID-controlled option when set-point accuracy matters
All models are listed in the Heating Mantle category.
Frequently Asked Questions
How is the temperature controlled?
By an energy regulator, with the mantle able to reach up to 350 °C.
What sizes can I order?
Capacities of 50, 100, 250, 500, 1000, 2000, 3000 and 5000 ml, with power ratings between 60 W and 600 W; the rating for each capacity is confirmed in your quotation.
Can I heat a beaker in it?
The mantle is designed for glassware vessels such as flasks resting directly on the element. For flat-bottomed beakers a hot plate is usually more practical.
Are support rods and clamps included?
They are not listed for this model. A retort stand and clamp can be quoted with the mantle.
Why use a mantle instead of a burner?
The glass-fabric element heats the flask uniformly without substantially increasing the risk of shattering, and there is no open flame near volatile liquids.
What electrical supply and warranty apply?
Supply voltage is not stated in our listing, and warranty is confirmed per quotation — contact us for both.
Is bulk and export supply available?
Yes, for laboratories and distributors in India and international markets; include capacities and quantities in your enquiry.
Request a Quote
Send the capacities you need through our contact page, or add the Heating Mantle to the enquiry cart.
Last updated: 24 September 2026
Digital Heating Mantles
Digital Heating Mantles (Product Code: SLE/LHM/03) bring set-point temperature control to mantle heating of round bottom flasks. A PID microprocessor controller works from an external temperature probe to give precise regulation, while the flexible, insulated heating element anchored in glass fabric inside a rolled aluminium body warms the flask uniformly without substantially increasing the risk of glass shattering. The element can reach 350 °C, and the external probe, support rods and clamps are included. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a laboratory equipment supplier in India serving institutions at home and in international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Digital heating mantle |
| Body | Rolled aluminium |
| Heating element | Flexible, insulated, anchored securely in glass fabric |
| Temperature control | PID microprocessor controller with external temperature probe |
| Heating element temperature | Up to 350 °C |
| Suitable vessels | Round bottom glassware vessels such as flasks |
| Supplied with | External temperature probe, support rods and clamps |
Typical Use
This mantle is chosen when a procedure calls for a defined temperature rather than just “more” or “less” heat — controlled reflux, gentle solvent removal, or distillation of mixtures that should not be overheated. With the probe placed in the liquid, the PID controller adjusts power continuously to hold the sample at the chosen value and keep overshoot small, something a simple energy regulator cannot do. Pharmacy college lab equipment lists and research groups often favour this kind of control for extractions and preparations where repeatability matters.
For best results, insert the probe through a side neck so its tip sits in the liquid without touching the glass, and mount the flask and condenser with the supplied support rods and clamps before switching on. Set a target a little below the boiling point for slow evaporation, or just above it for steady reflux. Let the mantle cool before moving the flask, and keep liquids away from the glass-fabric element.
Manufacturer
Behind the ScienceLab name is Jain Scientific Equipments Private Limited, an Ambala-based private limited company (CIN U29309HR2020PTC087597). Its mantles and other apparatus are manufactured at the company's licensed premises at 449, HSIIDC Industrial Area, Saha, Ambala, under Factory Licence AMB-ONLINE-CHD-J-414. Our company profile has further information.
Related Laboratory Equipment
Glassware and alternative mantles for probe-controlled heating:
- Round Bottom Flask With Two Neck — one neck for the temperature probe, the other for a condenser
- Fractional Distillation Assembly — for separations that benefit from steady, controlled heating
- Digital Heating Mantle With Stirrer — the same style of control with built-in stirring
- Heating Mantle — an energy-regulator model for routine heating
See all options in the Heating Mantle category.
Frequently Asked Questions
How is this different from the standard Heating Mantle?
It uses a PID microprocessor controller with an external probe instead of an energy regulator, and it comes with the probe, support rods and clamps.
Where should the temperature probe go?
In the liquid, usually through a side neck, so the controller responds to the sample temperature.
What is the maximum temperature?
The heating element can reach 350 °C.
Which flask capacities are available?
Capacities are not given in our current listing for this model. Please tell us the flask size you use and we will confirm the matching mantle.
Does it stir the contents?
No stirring function is listed. If you need stirring, see the Digital Heating Mantle With Stirrer.
Is calibration documentation available?
Discuss any calibration paperwork you need for the controller through the contact page before ordering.
Can you supply several units or ship overseas?
Yes, to laboratories and distributors in India and international markets; warranty terms and supply voltage are confirmed in the quotation.
Request a Quote
To get a price for Digital Heating Mantles, send us your requirement or add the item to the enquiry cart.
Last updated: 24 September 2026
659.jpg)
Heating Mantle With Stirrer (Rota Mantle)
Heating Mantle With Stirrer (Rota Mantle) (Product Code: SLE/LHM/04) is a two-tier unit that stirs the contents of a flask while heating it uniformly: the upper part holds the heating element and the lower part houses the stirring motor. Heat output is set with an energy regulator, and step-less speed control varies stirring smoothly up to 1200 rpm. Offered from 50 ml to 5000 ml, it suits teaching and routine laboratory work where mixing and heating have to happen together. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a chemistry lab instruments supplier to institutions in India and international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Heating mantle with stirrer (Rota Mantle) |
| Construction | Two-tier: heating element in the upper part, stirring motor in the lower part |
| Heat control | Energy regulator |
| Stirring speed | Step-less control, smooth variation up to 1200 rpm |
| Capacity options | 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml |
| Power rating options | 60 W, 150 W, 200 W, 300 W, 450 W, 600 W |
Typical Use
Stirring while heating keeps solids suspended and stops them settling onto the hot glass, so the Rota Mantle is a natural fit for dissolving slow-to-dissolve solids, recrystallisation, and reflux of mixtures that contain a solid or two immiscible liquids. College practicals such as ester preparation or saponification benefit from the even temperature that constant mixing gives. Because the energy regulator sets power rather than a temperature, a thermometer held in the flask is the easiest way to follow what the contents are actually doing.
Start the stirring before turning up the heat so warmth spreads from the first minute, raise the speed gradually to avoid splashing, and clamp the flask independently so vibration cannot move it off the element. Select the capacity that matches your flask for full contact. For departments equipping several benches, the wide size range makes it practical lab equipment for college teaching labs, from small-scale student preparations to larger demonstration batches.
Manufacturer
The Rota Mantle is one of the heating products made by Jain Scientific Equipments Private Limited in Ambala, Haryana, and sold under the company's ScienceLab label. Read our company profile to find out more.
Related Laboratory Equipment
Accessories and alternatives for stirred heating:
- Round Bottom Flask, Wide Neck — easier to add solids to a stirred flask
- Laboratory Thermometer — for monitoring the contents, since the regulator sets power rather than temperature
- Thermometer Clamp — holds the thermometer at the right depth in the flask
- Retort Stand — independent support for the flask and any condenser
- Digital Heating Mantle With Stirrer — a PID-controlled model with an external probe
Explore every mantle in the Heating Mantle category.
Frequently Asked Questions
How is the heat controlled?
With an energy regulator that sets the heating power; use a thermometer in the flask to follow the actual temperature.
How fast can it stir?
Stirring speed varies step-lessly up to 1200 rpm.
Which sizes are offered?
Capacities from 50 ml to 5000 ml and power ratings from 60 W to 600 W; the rating for each size is confirmed in the quotation.
What is the maximum temperature?
A maximum temperature is not stated in our listing for this model. Contact us and we will confirm it for the size you need.
How does it compare with the Digital Heating Mantle With Stirrer?
Both stir up to 1200 rpm; the digital model adds PID control through an external probe and lists a probe, support rods and clamps as included.
Are support rods, clamps or a stirring element included?
These are not listed for the Rota Mantle; please ask us to confirm what is packed and to quote any extras.
Can you supply bulk or export orders?
Yes, to institutions and distributors in India and international markets; warranty terms and supply voltage are confirmed in each quotation.
Request a Quote
Let us know the capacities and quantities you need via the contact page, or add the Rota Mantle to your enquiry cart.
Last updated: 24 September 2026
Multi Position Heating Mantle
Multi Position Heating Mantle (Product Code: SLE/LHM/05) is a bench unit designed to heat between 3 and 6 round bottom flasks simultaneously, with each heating mantle regulated by its own built-in temperature controller. The heating elements operate up to 350 °C, while a vented housing and air-flow design keep the outside of the unit cool to touch. Support rods and clamps are included. It is often used for distillation, extraction and reflux wherever several flasks must be heated at once, and it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as laboratory distillation apparatus for India and international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Multi-position heating mantle |
| Positions | Designed to heat between 3 and 6 round bottom flasks simultaneously |
| Control | Individual built-in temperature controller for each heating mantle |
| Maximum operating temperature | 350 °C (heating elements) |
| Housing | Vented, with an air-flow design that keeps the unit cool to touch |
| Flask capacity options | 100 ml, 250 ml, 500 ml, 1000 ml |
| Power rating options | 180 W, 360 W, 450 W, 600 W, 900 W, 1200 W, 1800 W |
| Supplied with | Support rods and clamps |
| Typical applications | Distillation, extraction and reflux |
Typical Use
A multi-position mantle earns its bench space in two situations. In teaching laboratories, several students or pairs can run the same reflux or distillation side by side from one unit, so a whole practical group finishes together. In analytical and research work, the separate controllers let an analyst run replicate extractions in parallel, or compare the same preparation at different heat settings without needing a row of individual mantles and extension leads.
Fit each flask with its own reflux condenser or distillation head, fix the glassware to the supplied support rods with the clamps, and set every position individually before switching on. Leave unused positions switched off, keep the vents unobstructed so the housing stays cool, and route coolant tubing so it cannot touch the heated flasks. Checking that each flask matches the position's capacity ensures full contact with the element and even heating.
Manufacturer
Manufacturing of this unit is carried out by Jain Scientific Equipments Private Limited of Ambala, Haryana, the firm that owns the ScienceLab trade name and supplies laboratories in India and abroad. Our company profile explains more about us.
Related Laboratory Equipment
Glassware and fittings for parallel heating set-ups:
- Liebig Condenser — one per flask for parallel reflux or distillation
- Round Bottom Flask — choose sizes that match the positions' flask capacity
- Boss Head — for attaching additional clamps to the support rods
- Distillation Apparatus — a complete distillation glassware set for each position
- Heating Mantle — a single-position model for smaller workloads
Compare other models in the Heating Mantle category.
Frequently Asked Questions
How many flasks can it heat at once?
It is designed for between 3 and 6 round bottom flasks simultaneously; the number of positions for your unit is confirmed in the quotation.
Can each flask be run at a different temperature?
Yes. Every heating mantle has its own built-in temperature controller.
What flask sizes does it take?
Flask capacities of 100, 250, 500 and 1000 ml are listed, with power ratings from 180 W to 1800 W depending on configuration.
How hot does it get, and is the housing safe to touch?
The heating elements operate up to 350 °C; the vented housing and air flow keep the unit's exterior cool to touch, though flasks and elements remain hot.
What is included?
Support rods and clamps are included. Flasks and condensers are ordered separately.
Is a calibration certificate available for the controllers?
Please discuss any calibration documentation requirement with us through the contact page.
What should an institutional enquiry include?
The number of positions, flask size, quantity and delivery location in India or abroad; supply voltage and warranty terms are confirmed in our quotation.
Request a Quote
Share your configuration on our contact page or add the Multi Position Heating Mantle to the enquiry cart.
Last updated: 24 September 2026
